/* MIT License Copyright (c) 2019 lewis he Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #include "axp20x.h" // AXP20X_Class axp; const uint8_t i2c_sda = 21; const uint8_t i2c_scl = 22; const uint8_t slave_address = AXP192_SLAVE_ADDRESS; //use axp192 // const uint8_t slave_address = AXP202_SLAVE_ADDRESS; //use axp202 void printPowerChannel(); void setup(void) { Serial.begin(115200); Wire.begin(i2c_sda, i2c_scl); Serial.println("AXP192/AXP202 ADC Test"); /* Initialise the pmu */ int ret = axp.begin(Wire, slave_address); if (ret) { /* There was a problem detecting the AXP202/192 ... check your connections */ Serial.println("Ooops, AXP202/AXP192 power chip detected ... Check your wiring!"); while (1); } /*Enable AXP ADC function*/ axp.adc1Enable(AXP202_VBUS_VOL_ADC1 | AXP202_VBUS_CUR_ADC1 | AXP202_BATT_CUR_ADC1 | AXP202_BATT_VOL_ADC1, true); Serial.println(""); printPowerChannel(); } void loop(void) { Serial.println("========================="); Serial.print("VBUS STATUS: "); // You can use isVBUSPlug to check whether the USB connection is normal if (axp.isVBUSPlug()) { Serial.println("CONNECT"); // Get USB voltage Serial.print("VBUS Volate:"); Serial.print(axp.getVbusVoltage()); Serial.println(" mV"); // Get USB current Serial.print("VBUS Current: "); Serial.print(axp.getVbusCurrent()); Serial.println(" mA"); } else { Serial.println("DISCONNECT"); } Serial.println("========================="); Serial.print("BATTERY STATUS: "); // You can use isBatteryConnect() to check whether the battery is connected properly if (axp.isBatteryConnect()) { Serial.println("CONNECT"); // Get battery voltage Serial.print("BAT Volate:"); Serial.print(axp.getBattVoltage()); Serial.println(" mV"); // To display the charging status, you must first discharge the battery, // and it is impossible to read the full charge when it is fully charged if (axp.isChargeing()) { Serial.print("Charge:"); Serial.print(axp.getBattChargeCurrent()); Serial.println(" mA"); } else { // Show current consumption Serial.print("Discharge:"); Serial.print(axp.getBattDischargeCurrent()); Serial.println(" mA"); /*getBattPercentage just only support axp202 */ if (slave_address == AXP202_SLAVE_ADDRESS) { Serial.print("Per: "); Serial.print(axp.getBattPercentage()); Serial.println(" %"); } } } else { Serial.println("DISCONNECT"); } Serial.println(); Serial.println(); delay(3000); } void printPowerChannel() { Serial.print("DC2:"); Serial.print(axp.isDCDC2Enable() ? String(axp.getDCDC2Voltage()) + " mv" : "DISABLE"); Serial.print(" "); Serial.print("DC3:"); Serial.print(axp.isDCDC3Enable() ? String(axp.getDCDC3Voltage()) + " mv" : "DISABLE"); Serial.print(" "); Serial.print("LDO2:"); Serial.print(axp.isLDO2Enable() ? String(axp.getLDO2Voltage()) + " mv" : "DISABLE"); Serial.print(" "); Serial.print("LDO3:"); Serial.print(axp.isLDO3Enable() ? String(axp.getLDO3Voltage()) + " mv" : "DISABLE"); Serial.print(" "); Serial.print("LDO4:"); Serial.print(axp.isLDO4Enable() ? "ENABLE" : "DISABLE"); Serial.print(" "); Serial.print("Exten:"); Serial.print(axp.isExtenEnable() ? "ENABLE" : "DISABLE"); Serial.print("\r\n"); }