Compare commits

...

5 Commits

Author SHA1 Message Date
Yu Xifeng
0be9f6e079 增加ESP32C3的虚拟串口调试功能 2024-09-02 15:23:45 +08:00
Yu Xifeng
c09ded8f57 更新ESP32C3的分区表 2024-08-27 09:57:49 +08:00
Yu Xifeng
bbfac9aba1 将动态组件保存到源码工程中 2024-08-26 16:49:31 +08:00
Yu Xifeng
674ff93b30 修复分支报错 2024-08-26 15:50:36 +08:00
Yu Xifeng
d79ed5a22b ESP32C3初始化SDK配置 2024-08-26 15:43:39 +08:00
1480 changed files with 3437 additions and 249035 deletions

View File

@ -0,0 +1,6 @@
# The following five lines of boilerplate have to be in your project's
# CMakeLists in this exact order for cmake to work correctly
cmake_minimum_required(VERSION 3.5)
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
project(button_power_save)

View File

@ -0,0 +1,43 @@
## Button Power Save Example
This example demonstrates how to utilize the `button` component in conjunction with the light sleep low-power mode.
* `button` [Component Introduction](https://docs.espressif.com/projects/esp-iot-solution/en/latest/input_device/button.html)
## Hardware
* Any GPIO on any development board can be used in this example.
## Build and Flash
Build the project and flash it to the board, then run the monitor tool to view the serial output:
* Run `. ./export.sh` to set IDF environment
* Run `idf.py set-target esp32xx` to set target chip
* Run `idf.py -p PORT flash monitor` to build, flash and monitor the project
(To exit the serial monitor, type `Ctrl-]`.)
See the Getting Started Guide for all the steps to configure and use the ESP-IDF to build projects.
## Example Output
```
I (1139) pm: Frequency switching config: CPU_MAX: 160, APB_MAX: 80, APB_MIN: 80, Light sleep: ENABLED
I (1149) sleep: Code start at 42000020, total 119.03 KiB, data start at 3c000000, total 49152.00 KiB
I (1159) button: IoT Button Version: 3.2.0
I (1163) gpio: GPIO[0]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (2922) button_power_save: Button event BUTTON_PRESS_DOWN
I (3017) button_power_save: Button event BUTTON_PRESS_UP
I (3017) button_power_save: Wake up from light sleep, reason 4
I (3200) button_power_save: Button event BUTTON_SINGLE_CLICK
I (3200) button_power_save: Wake up from light sleep, reason 4
I (3202) button_power_save: Button event BUTTON_PRESS_REPEAT_DONE
I (3208) button_power_save: Wake up from light sleep, reason 4
I (3627) button_power_save: Button event BUTTON_PRESS_DOWN
I (3702) button_power_save: Button event BUTTON_PRESS_UP
I (3702) button_power_save: Wake up from light sleep, reason 4
I (3887) button_power_save: Button event BUTTON_SINGLE_CLICK
I (3887) button_power_save: Wake up from light sleep, reason 4
I (3889) button_power_save: Button event BUTTON_PRESS_REPEAT_DONE
```

View File

@ -0,0 +1,2 @@
idf_component_register(SRCS "main.c"
INCLUDE_DIRS ".")

View File

@ -0,0 +1,87 @@
menu "Example Configuration"
choice ENTER_LIGHT_SLEEP_MODE
prompt "Enter light sleep mode"
default ENTER_LIGHT_SLEEP_AUTO
depends on PM_ENABLE
help
Enable light sleep mode to save power.
config ENTER_LIGHT_SLEEP_AUTO
bool "Auto enter Light Sleep"
config ENTER_LIGHT_SLEEP_MODE_MANUALLY
bool "Manually enter Light Sleep"
endchoice
choice EXAMPLE_MAX_CPU_FREQ
prompt "Maximum CPU frequency"
default EXAMPLE_MAX_CPU_FREQ_80 if !IDF_TARGET_ESP32H2
default EXAMPLE_MAX_CPU_FREQ_96 if IDF_TARGET_ESP32H2
depends on PM_ENABLE
help
Maximum CPU frequency to use for dynamic frequency scaling.
config EXAMPLE_MAX_CPU_FREQ_80
bool "80 MHz"
config EXAMPLE_MAX_CPU_FREQ_96
bool "96 MHz"
depends on IDF_TARGET_ESP32H2
config EXAMPLE_MAX_CPU_FREQ_120
bool "120 MHz"
depends on IDF_TARGET_ESP32C2
config EXAMPLE_MAX_CPU_FREQ_160
bool "160 MHz"
depends on !IDF_TARGET_ESP32C2
config EXAMPLE_MAX_CPU_FREQ_240
bool "240 MHz"
depends on IDF_TARGET_ESP32 || IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
endchoice
config EXAMPLE_MAX_CPU_FREQ_MHZ
int
default 80 if EXAMPLE_MAX_CPU_FREQ_80
default 96 if EXAMPLE_MAX_CPU_FREQ_96
default 120 if EXAMPLE_MAX_CPU_FREQ_120
default 160 if EXAMPLE_MAX_CPU_FREQ_160
default 240 if EXAMPLE_MAX_CPU_FREQ_240
choice EXAMPLE_MIN_CPU_FREQ
prompt "Minimum CPU frequency"
default EXAMPLE_MIN_CPU_FREQ_10M if !IDF_TARGET_ESP32H2
default EXAMPLE_MIN_CPU_FREQ_32M if IDF_TARGET_ESP32H2
depends on PM_ENABLE
help
Minimum CPU frequency to use for dynamic frequency scaling.
Should be set to XTAL frequency or XTAL frequency divided by integer.
config EXAMPLE_MIN_CPU_FREQ_40M
bool "40 MHz (use with 40MHz XTAL)"
depends on XTAL_FREQ_40 || XTAL_FREQ_AUTO || ESP32_XTAL_FREQ_40 || ESP32_XTAL_FREQ_AUTO || !IDF_TARGET_ESP32
config EXAMPLE_MIN_CPU_FREQ_20M
bool "20 MHz (use with 40MHz XTAL)"
depends on XTAL_FREQ_40 || XTAL_FREQ_AUTO || ESP32_XTAL_FREQ_40 || ESP32_XTAL_FREQ_AUTO || !IDF_TARGET_ESP32
config EXAMPLE_MIN_CPU_FREQ_10M
bool "10 MHz (use with 40MHz XTAL)"
depends on XTAL_FREQ_40 || XTAL_FREQ_AUTO || ESP32_XTAL_FREQ_40 || ESP32_XTAL_FREQ_AUTO || !IDF_TARGET_ESP32
config EXAMPLE_MIN_CPU_FREQ_26M
bool "26 MHz (use with 26MHz XTAL)"
depends on XTAL_FREQ_26 || XTAL_FREQ_AUTO || ESP32_XTAL_FREQ_26 || ESP32_XTAL_FREQ_AUTO
config EXAMPLE_MIN_CPU_FREQ_13M
bool "13 MHz (use with 26MHz XTAL)"
depends on XTAL_FREQ_26 || XTAL_FREQ_AUTO || ESP32_XTAL_FREQ_26 || ESP32_XTAL_FREQ_AUTO
config EXAMPLE_MIN_CPU_FREQ_32M
bool "32 MHz (use with 32MHz XTAL)"
depends on IDF_TARGET_ESP32H2
depends on XTAL_FREQ_32 || XTAL_FREQ_AUTO
endchoice
config EXAMPLE_MIN_CPU_FREQ_MHZ
int
default 40 if EXAMPLE_MIN_CPU_FREQ_40M
default 20 if EXAMPLE_MIN_CPU_FREQ_20M
default 10 if EXAMPLE_MIN_CPU_FREQ_10M
default 26 if EXAMPLE_MIN_CPU_FREQ_26M
default 13 if EXAMPLE_MIN_CPU_FREQ_13M
default 32 if EXAMPLE_MIN_CPU_FREQ_32M
endmenu

View File

@ -0,0 +1,6 @@
version: "0.0.1"
dependencies:
idf: ">=4.4"
button:
version: "*"
override_path: "../../../../components/button"

View File

@ -0,0 +1,139 @@
/*
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdio.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_log.h"
#include "esp_pm.h"
#include "iot_button.h"
#include "esp_sleep.h"
#include "esp_idf_version.h"
/* Most development boards have "boot" button attached to GPIO0.
* You can also change this to another pin.
*/
#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C2 || CONFIG_IDF_TARGET_ESP32H2 || CONFIG_IDF_TARGET_ESP32C6
#define BOOT_BUTTON_NUM 9
#else
#define BOOT_BUTTON_NUM 0
#endif
#define BUTTON_ACTIVE_LEVEL 0
static const char *TAG = "button_power_save";
const char *button_event_table[] = {
"BUTTON_PRESS_DOWN",
"BUTTON_PRESS_UP",
"BUTTON_PRESS_REPEAT",
"BUTTON_PRESS_REPEAT_DONE",
"BUTTON_SINGLE_CLICK",
"BUTTON_DOUBLE_CLICK",
"BUTTON_MULTIPLE_CLICK",
"BUTTON_LONG_PRESS_START",
"BUTTON_LONG_PRESS_HOLD",
"BUTTON_LONG_PRESS_UP",
"BUTTON_PRESS_END",
};
static void button_event_cb(void *arg, void *data)
{
ESP_LOGI(TAG, "Button event %s", button_event_table[(button_event_t)data]);
esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
if (cause != ESP_SLEEP_WAKEUP_UNDEFINED) {
ESP_LOGI(TAG, "Wake up from light sleep, reason %d", cause);
}
}
#if CONFIG_ENTER_LIGHT_SLEEP_MODE_MANUALLY
void button_enter_power_save(void *usr_data)
{
ESP_LOGI(TAG, "Can enter power save now");
esp_light_sleep_start();
}
#endif
void button_init(uint32_t button_num)
{
button_config_t btn_cfg = {
.type = BUTTON_TYPE_GPIO,
.gpio_button_config = {
.gpio_num = button_num,
.active_level = BUTTON_ACTIVE_LEVEL,
#if CONFIG_GPIO_BUTTON_SUPPORT_POWER_SAVE
.enable_power_save = true,
#endif
},
};
button_handle_t btn = iot_button_create(&btn_cfg);
assert(btn);
esp_err_t err = iot_button_register_cb(btn, BUTTON_PRESS_DOWN, button_event_cb, (void *)BUTTON_PRESS_DOWN);
err |= iot_button_register_cb(btn, BUTTON_PRESS_UP, button_event_cb, (void *)BUTTON_PRESS_UP);
err |= iot_button_register_cb(btn, BUTTON_PRESS_REPEAT, button_event_cb, (void *)BUTTON_PRESS_REPEAT);
err |= iot_button_register_cb(btn, BUTTON_PRESS_REPEAT_DONE, button_event_cb, (void *)BUTTON_PRESS_REPEAT_DONE);
err |= iot_button_register_cb(btn, BUTTON_SINGLE_CLICK, button_event_cb, (void *)BUTTON_SINGLE_CLICK);
err |= iot_button_register_cb(btn, BUTTON_DOUBLE_CLICK, button_event_cb, (void *)BUTTON_DOUBLE_CLICK);
err |= iot_button_register_cb(btn, BUTTON_LONG_PRESS_START, button_event_cb, (void *)BUTTON_LONG_PRESS_START);
err |= iot_button_register_cb(btn, BUTTON_LONG_PRESS_HOLD, button_event_cb, (void *)BUTTON_LONG_PRESS_HOLD);
err |= iot_button_register_cb(btn, BUTTON_LONG_PRESS_UP, button_event_cb, (void *)BUTTON_LONG_PRESS_UP);
err |= iot_button_register_cb(btn, BUTTON_PRESS_END, button_event_cb, (void *)BUTTON_PRESS_END);
#if CONFIG_ENTER_LIGHT_SLEEP_MODE_MANUALLY
/*!< For enter Power Save */
button_power_save_config_t config = {
.enter_power_save_cb = button_enter_power_save,
};
err |= iot_button_register_power_save_cb(&config);
#endif
ESP_ERROR_CHECK(err);
}
#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 1, 0)
void power_save_init(void)
{
esp_pm_config_t pm_config = {
.max_freq_mhz = CONFIG_EXAMPLE_MAX_CPU_FREQ_MHZ,
.min_freq_mhz = CONFIG_EXAMPLE_MIN_CPU_FREQ_MHZ,
#if CONFIG_FREERTOS_USE_TICKLESS_IDLE
.light_sleep_enable = true
#endif
};
ESP_ERROR_CHECK(esp_pm_configure(&pm_config));
}
#else
void power_save_init(void)
{
#if CONFIG_IDF_TARGET_ESP32
esp_pm_config_esp32_t pm_config = {
#elif CONFIG_IDF_TARGET_ESP32S2
esp_pm_config_esp32s2_t pm_config = {
#elif CONFIG_IDF_TARGET_ESP32C3
esp_pm_config_esp32c3_t pm_config = {
#elif CONFIG_IDF_TARGET_ESP32S3
esp_pm_config_esp32s3_t pm_config = {
#elif CONFIG_IDF_TARGET_ESP32C2
esp_pm_config_esp32c2_t pm_config = {
#endif
.max_freq_mhz = CONFIG_EXAMPLE_MAX_CPU_FREQ_MHZ,
.min_freq_mhz = CONFIG_EXAMPLE_MIN_CPU_FREQ_MHZ,
#if CONFIG_FREERTOS_USE_TICKLESS_IDLE
.light_sleep_enable = true
#endif
};
ESP_ERROR_CHECK(esp_pm_configure(&pm_config));
}
#endif
void app_main(void)
{
button_init(BOOT_BUTTON_NUM);
#if CONFIG_ENTER_LIGHT_SLEEP_AUTO
power_save_init();
#else
esp_light_sleep_start();
#endif
}

View File

@ -0,0 +1,9 @@
# The following lines of boilerplate have to be in your project's CMakeLists
# in this exact order for cmake to work correctly
cmake_minimum_required(VERSION 3.5)
set(EXTRA_COMPONENT_DIRS "$ENV{IDF_PATH}/tools/unit-test-app/components"
"../../button")
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
project(button_test)

View File

@ -0,0 +1,9 @@
if("${IDF_VERSION_MAJOR}.${IDF_VERSION_MINOR}" VERSION_GREATER_EQUAL "5.0")
list(APPEND PRIVREQ esp_adc)
else()
list(APPEND PRIVREQ esp_adc_cal)
endif()
idf_component_register(SRC_DIRS "."
PRIV_INCLUDE_DIRS "."
PRIV_REQUIRES unity test_utils button ${PRIVREQ})

View File

@ -0,0 +1,767 @@
/* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "stdio.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "freertos/timers.h"
#include "freertos/semphr.h"
#include "freertos/event_groups.h"
#include "esp_idf_version.h"
#include "esp_log.h"
#include "unity.h"
#include "iot_button.h"
#include "sdkconfig.h"
static const char *TAG = "BUTTON TEST";
#define TEST_MEMORY_LEAK_THRESHOLD (-400)
#define BUTTON_IO_NUM 0
#define BUTTON_ACTIVE_LEVEL 0
#define BUTTON_NUM 16
static size_t before_free_8bit;
static size_t before_free_32bit;
static button_handle_t g_btns[BUTTON_NUM] = {0};
static int get_btn_index(button_handle_t btn)
{
for (size_t i = 0; i < BUTTON_NUM; i++) {
if (btn == g_btns[i]) {
return i;
}
}
return -1;
}
static void button_press_down_cb(void *arg, void *data)
{
TEST_ASSERT_EQUAL_HEX(BUTTON_PRESS_DOWN, iot_button_get_event(arg));
ESP_LOGI(TAG, "BTN%d: BUTTON_PRESS_DOWN", get_btn_index((button_handle_t)arg));
}
static void button_press_up_cb(void *arg, void *data)
{
TEST_ASSERT_EQUAL_HEX(BUTTON_PRESS_UP, iot_button_get_event(arg));
ESP_LOGI(TAG, "BTN%d: BUTTON_PRESS_UP[%d]", get_btn_index((button_handle_t)arg), iot_button_get_ticks_time((button_handle_t)arg));
}
static void button_press_repeat_cb(void *arg, void *data)
{
ESP_LOGI(TAG, "BTN%d: BUTTON_PRESS_REPEAT[%d]", get_btn_index((button_handle_t)arg), iot_button_get_repeat((button_handle_t)arg));
}
static void button_single_click_cb(void *arg, void *data)
{
TEST_ASSERT_EQUAL_HEX(BUTTON_SINGLE_CLICK, iot_button_get_event(arg));
ESP_LOGI(TAG, "BTN%d: BUTTON_SINGLE_CLICK", get_btn_index((button_handle_t)arg));
}
static void button_double_click_cb(void *arg, void *data)
{
TEST_ASSERT_EQUAL_HEX(BUTTON_DOUBLE_CLICK, iot_button_get_event(arg));
ESP_LOGI(TAG, "BTN%d: BUTTON_DOUBLE_CLICK", get_btn_index((button_handle_t)arg));
}
static void button_long_press_start_cb(void *arg, void *data)
{
TEST_ASSERT_EQUAL_HEX(BUTTON_LONG_PRESS_START, iot_button_get_event(arg));
ESP_LOGI(TAG, "BTN%d: BUTTON_LONG_PRESS_START", get_btn_index((button_handle_t)arg));
}
static void button_long_press_hold_cb(void *arg, void *data)
{
TEST_ASSERT_EQUAL_HEX(BUTTON_LONG_PRESS_HOLD, iot_button_get_event(arg));
ESP_LOGI(TAG, "BTN%d: BUTTON_LONG_PRESS_HOLD[%d],count is [%d]", get_btn_index((button_handle_t)arg), iot_button_get_ticks_time((button_handle_t)arg), iot_button_get_long_press_hold_cnt((button_handle_t)arg));
}
static void button_press_repeat_done_cb(void *arg, void *data)
{
TEST_ASSERT_EQUAL_HEX(BUTTON_PRESS_REPEAT_DONE, iot_button_get_event(arg));
ESP_LOGI(TAG, "BTN%d: BUTTON_PRESS_REPEAT_DONE[%d]", get_btn_index((button_handle_t)arg), iot_button_get_repeat((button_handle_t)arg));
}
static esp_err_t custom_button_gpio_init(void *param)
{
button_gpio_config_t *cfg = (button_gpio_config_t *)param;
return button_gpio_init(cfg);
}
static uint8_t custom_button_gpio_get_key_value(void *param)
{
button_gpio_config_t *cfg = (button_gpio_config_t *)param;
return button_gpio_get_key_level((void *)cfg->gpio_num);
}
static esp_err_t custom_button_gpio_deinit(void *param)
{
button_gpio_config_t *cfg = (button_gpio_config_t *)param;
return button_gpio_deinit(cfg->gpio_num);
}
TEST_CASE("custom button test", "[button][iot]")
{
button_gpio_config_t *gpio_cfg = calloc(1, sizeof(button_gpio_config_t));
gpio_cfg->active_level = 0;
gpio_cfg->gpio_num = 0;
button_config_t cfg = {
.type = BUTTON_TYPE_CUSTOM,
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
.custom_button_config = {
.button_custom_init = custom_button_gpio_init,
.button_custom_deinit = custom_button_gpio_deinit,
.button_custom_get_key_value = custom_button_gpio_get_key_value,
.active_level = 0,
.priv = gpio_cfg,
},
};
g_btns[0] = iot_button_create(&cfg);
TEST_ASSERT_NOT_NULL(g_btns[0]);
iot_button_register_cb(g_btns[0], BUTTON_PRESS_DOWN, button_press_down_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_PRESS_UP, button_press_up_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_PRESS_REPEAT, button_press_repeat_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_DOUBLE_CLICK, button_double_click_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_LONG_PRESS_START, button_long_press_start_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_LONG_PRESS_HOLD, button_long_press_hold_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_PRESS_REPEAT_DONE, button_press_repeat_done_cb, NULL);
while (1) {
vTaskDelay(pdMS_TO_TICKS(1000));
}
iot_button_delete(g_btns[0]);
}
TEST_CASE("gpio button test", "[button][iot]")
{
button_config_t cfg = {
.type = BUTTON_TYPE_GPIO,
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
.gpio_button_config = {
.gpio_num = 0,
.active_level = 0,
},
};
g_btns[0] = iot_button_create(&cfg);
TEST_ASSERT_NOT_NULL(g_btns[0]);
iot_button_register_cb(g_btns[0], BUTTON_PRESS_DOWN, button_press_down_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_PRESS_UP, button_press_up_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_PRESS_REPEAT, button_press_repeat_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_DOUBLE_CLICK, button_double_click_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_LONG_PRESS_START, button_long_press_start_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_LONG_PRESS_HOLD, button_long_press_hold_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_PRESS_REPEAT_DONE, button_press_repeat_done_cb, NULL);
uint8_t level = 0;
level = iot_button_get_key_level(g_btns[0]);
ESP_LOGI(TAG, "button level is %d", level);
while (1) {
vTaskDelay(pdMS_TO_TICKS(1000));
}
iot_button_delete(g_btns[0]);
}
TEST_CASE("gpio button get event test", "[button][iot]")
{
const char *EVENT_STR[] = {"BUTTON_PRESS_DOWN",
"BUTTON_PRESS_UP",
"BUTTON_PRESS_REPEAT",
"BUTTON_PRESS_REPEAT_DONE",
"BUTTON_SINGLE_CLICK",
"BUTTON_DOUBLE_CLICK",
"BUTTON_MULTIPLE_CLICK",
"BUTTON_LONG_PRESS_START",
"BUTTON_LONG_PRESS_HOLD",
"BUTTON_LONG_PRESS_UP",
"BUTTON_PRESS_END",
};
button_config_t cfg = {
.type = BUTTON_TYPE_GPIO,
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
.gpio_button_config = {
.gpio_num = 0,
.active_level = 0,
},
};
g_btns[0] = iot_button_create(&cfg);
TEST_ASSERT_NOT_NULL(g_btns[0]);
uint8_t level = 0;
level = iot_button_get_key_level(g_btns[0]);
ESP_LOGI(TAG, "button level is %d", level);
while (1) {
button_event_t event = iot_button_get_event(g_btns[0]);
if (event != BUTTON_NONE_PRESS) {
printf("event is %s\n", EVENT_STR[event]);
}
vTaskDelay(pdMS_TO_TICKS(1));
}
iot_button_delete(g_btns[0]);
}
TEST_CASE("gpio button test power save", "[button][iot][power save]")
{
button_config_t cfg = {
.type = BUTTON_TYPE_GPIO,
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
.gpio_button_config = {
.gpio_num = 0,
.active_level = 0,
},
};
g_btns[0] = iot_button_create(&cfg);
TEST_ASSERT_NOT_NULL(g_btns[0]);
iot_button_register_cb(g_btns[0], BUTTON_PRESS_DOWN, button_press_down_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_PRESS_UP, button_press_up_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_PRESS_REPEAT, button_press_repeat_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_DOUBLE_CLICK, button_double_click_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_LONG_PRESS_START, button_long_press_start_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_LONG_PRESS_HOLD, button_long_press_hold_cb, NULL);
iot_button_register_cb(g_btns[0], BUTTON_PRESS_REPEAT_DONE, button_press_repeat_done_cb, NULL);
TEST_ASSERT_EQUAL(ESP_OK, iot_button_stop());
vTaskDelay(pdMS_TO_TICKS(1000));
TEST_ASSERT_EQUAL(ESP_OK, iot_button_resume());
while (1) {
vTaskDelay(pdMS_TO_TICKS(1000));
}
iot_button_delete(g_btns[0]);
}
TEST_CASE("matrix keyboard button test", "[button][matrix key]")
{
int32_t row_gpio[4] = {4, 5, 6, 7};
int32_t col_gpio[4] = {3, 8, 16, 15};
button_config_t cfg = {
.type = BUTTON_TYPE_MATRIX,
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
.matrix_button_config = {
.row_gpio_num = 0,
.col_gpio_num = 0,
}
};
for (int i = 0; i < 4; i++) {
cfg.matrix_button_config.row_gpio_num = row_gpio[i];
for (int j = 0; j < 4; j++) {
cfg.matrix_button_config.col_gpio_num = col_gpio[j];
g_btns[i * 4 + j] = iot_button_create(&cfg);
TEST_ASSERT_NOT_NULL(g_btns[i * 4 + j]);
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_PRESS_DOWN, button_press_down_cb, NULL);
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_PRESS_UP, button_press_up_cb, NULL);
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_PRESS_REPEAT, button_press_repeat_cb, NULL);
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_DOUBLE_CLICK, button_double_click_cb, NULL);
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_LONG_PRESS_START, button_long_press_start_cb, NULL);
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_LONG_PRESS_HOLD, button_long_press_hold_cb, NULL);
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_PRESS_REPEAT_DONE, button_press_repeat_done_cb, NULL);
}
}
while (1) {
vTaskDelay(pdMS_TO_TICKS(1000));
}
for (int i = 0; i < 4; i++) {
for (int j = 0; j < 4; j++) {
iot_button_delete(g_btns[i * 4 + j]);
}
}
}
#if CONFIG_SOC_ADC_SUPPORTED
#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 0, 0)
TEST_CASE("adc button test", "[button][iot]")
{
/** ESP32-S3-Korvo board */
const uint16_t vol[6] = {380, 820, 1180, 1570, 1980, 2410};
button_config_t cfg = {0};
cfg.type = BUTTON_TYPE_ADC;
cfg.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS;
cfg.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS;
for (size_t i = 0; i < 6; i++) {
cfg.adc_button_config.adc_channel = 7,
cfg.adc_button_config.button_index = i;
if (i == 0) {
cfg.adc_button_config.min = (0 + vol[i]) / 2;
} else {
cfg.adc_button_config.min = (vol[i - 1] + vol[i]) / 2;
}
if (i == 5) {
cfg.adc_button_config.max = (vol[i] + 3000) / 2;
} else {
cfg.adc_button_config.max = (vol[i] + vol[i + 1]) / 2;
}
g_btns[i] = iot_button_create(&cfg);
TEST_ASSERT_NOT_NULL(g_btns[i]);
iot_button_register_cb(g_btns[i], BUTTON_PRESS_DOWN, button_press_down_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_PRESS_UP, button_press_up_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_PRESS_REPEAT, button_press_repeat_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_DOUBLE_CLICK, button_double_click_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_LONG_PRESS_START, button_long_press_start_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_LONG_PRESS_HOLD, button_long_press_hold_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_PRESS_REPEAT_DONE, button_press_repeat_done_cb, NULL);
}
while (1) {
vTaskDelay(pdMS_TO_TICKS(1000));
}
for (size_t i = 0; i < 6; i++) {
iot_button_delete(g_btns[i]);
}
}
#else
#include "esp_adc/adc_cali.h"
static esp_err_t adc_calibration_init(adc_unit_t unit, adc_atten_t atten, adc_cali_handle_t *out_handle)
{
#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
#define ADC_BUTTON_WIDTH SOC_ADC_RTC_MAX_BITWIDTH
#else
#define ADC_BUTTON_WIDTH ADC_WIDTH_MAX - 1
#endif
adc_cali_handle_t handle = NULL;
esp_err_t ret = ESP_FAIL;
bool calibrated = false;
#if ADC_CALI_SCHEME_CURVE_FITTING_SUPPORTED
if (!calibrated) {
ESP_LOGI(TAG, "calibration scheme version is %s", "Curve Fitting");
adc_cali_curve_fitting_config_t cali_config = {
.unit_id = unit,
.atten = atten,
.bitwidth = ADC_BUTTON_WIDTH,
};
ret = adc_cali_create_scheme_curve_fitting(&cali_config, &handle);
if (ret == ESP_OK) {
calibrated = true;
}
}
#endif
#if ADC_CALI_SCHEME_LINE_FITTING_SUPPORTED
if (!calibrated) {
ESP_LOGI(TAG, "calibration scheme version is %s", "Line Fitting");
adc_cali_line_fitting_config_t cali_config = {
.unit_id = unit,
.atten = atten,
.bitwidth = ADC_BUTTON_WIDTH,
};
ret = adc_cali_create_scheme_line_fitting(&cali_config, &handle);
if (ret == ESP_OK) {
calibrated = true;
}
}
#endif
*out_handle = handle;
if (ret == ESP_OK) {
ESP_LOGI(TAG, "Calibration Success");
} else if (ret == ESP_ERR_NOT_SUPPORTED || !calibrated) {
ESP_LOGW(TAG, "eFuse not burnt, skip software calibration");
} else {
ESP_LOGE(TAG, "Invalid arg or no memory");
}
return calibrated ? ESP_OK : ESP_FAIL;
}
TEST_CASE("adc button idf5 drive test", "[button][iot]")
{
adc_oneshot_unit_handle_t adc1_handle;
adc_cali_handle_t adc1_cali_handle;
adc_oneshot_unit_init_cfg_t init_config = {
.unit_id = ADC_UNIT_1,
};
esp_err_t ret = adc_oneshot_new_unit(&init_config, &adc1_handle);
TEST_ASSERT_TRUE(ret == ESP_OK);
/*!< use atten 11db or 12db */
adc_calibration_init(ADC_UNIT_1, 3, &adc1_cali_handle);
/** ESP32-S3-Korvo board */
const uint16_t vol[6] = {380, 820, 1180, 1570, 1980, 2410};
button_config_t cfg = {0};
cfg.type = BUTTON_TYPE_ADC;
cfg.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS;
cfg.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS;
for (size_t i = 0; i < 6; i++) {
cfg.adc_button_config.adc_handle = &adc1_handle;
cfg.adc_button_config.adc_channel = 7,
cfg.adc_button_config.button_index = i;
if (i == 0) {
cfg.adc_button_config.min = (0 + vol[i]) / 2;
} else {
cfg.adc_button_config.min = (vol[i - 1] + vol[i]) / 2;
}
if (i == 5) {
cfg.adc_button_config.max = (vol[i] + 3000) / 2;
} else {
cfg.adc_button_config.max = (vol[i] + vol[i + 1]) / 2;
}
g_btns[i] = iot_button_create(&cfg);
TEST_ASSERT_NOT_NULL(g_btns[i]);
iot_button_register_cb(g_btns[i], BUTTON_PRESS_DOWN, button_press_down_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_PRESS_UP, button_press_up_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_PRESS_REPEAT, button_press_repeat_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_DOUBLE_CLICK, button_double_click_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_LONG_PRESS_START, button_long_press_start_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_LONG_PRESS_HOLD, button_long_press_hold_cb, NULL);
iot_button_register_cb(g_btns[i], BUTTON_PRESS_REPEAT_DONE, button_press_repeat_done_cb, NULL);
}
while (1) {
vTaskDelay(pdMS_TO_TICKS(1000));
}
for (size_t i = 0; i < 6; i++) {
iot_button_delete(g_btns[i]);
}
}
#endif
#endif // CONFIG_SOC_ADC_SUPPORTED
#define GPIO_OUTPUT_IO_45 45
static EventGroupHandle_t g_check = NULL;
static SemaphoreHandle_t g_auto_check_pass = NULL;
static const char* button_event_str[BUTTON_EVENT_MAX] = {
"BUTTON_PRESS_DOWN",
"BUTTON_PRESS_UP",
"BUTTON_PRESS_REPEAT",
"BUTTON_PRESS_REPEAT_DONE",
"BUTTON_SINGLE_CLICK",
"BUTTON_DOUBLE_CLICK",
"BUTTON_MULTIPLE_CLICK",
"BUTTON_LONG_PRESS_START",
"BUTTON_LONG_PRESS_HOLD",
"BUTTON_LONG_PRESS_UP",
"BUTTON_PRESS_END",
};
static button_event_t state = BUTTON_PRESS_DOWN;
static void button_auto_press_test_task(void *arg)
{
// test BUTTON_PRESS_DOWN
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
vTaskDelay(pdMS_TO_TICKS(100));
// // test BUTTON_PRESS_UP
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
vTaskDelay(pdMS_TO_TICKS(200));
// test BUTTON_PRESS_REPEAT
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
vTaskDelay(pdMS_TO_TICKS(100));
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
vTaskDelay(pdMS_TO_TICKS(100));
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
vTaskDelay(pdMS_TO_TICKS(100));
// test BUTTON_PRESS_REPEAT_DONE
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
vTaskDelay(pdMS_TO_TICKS(200));
// test BUTTON_SINGLE_CLICK
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
vTaskDelay(pdMS_TO_TICKS(100));
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
vTaskDelay(pdMS_TO_TICKS(200));
// test BUTTON_DOUBLE_CLICK
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
vTaskDelay(pdMS_TO_TICKS(100));
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
vTaskDelay(pdMS_TO_TICKS(100));
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
vTaskDelay(pdMS_TO_TICKS(100));
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
vTaskDelay(pdMS_TO_TICKS(200));
// test BUTTON_MULTIPLE_CLICK
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
for (int i = 0; i < 4; i++) {
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
vTaskDelay(pdMS_TO_TICKS(100));
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
vTaskDelay(pdMS_TO_TICKS(100));
}
vTaskDelay(pdMS_TO_TICKS(100));
// test BUTTON_LONG_PRESS_START
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
vTaskDelay(pdMS_TO_TICKS(1600));
// test BUTTON_LONG_PRESS_HOLD and BUTTON_LONG_PRESS_UP
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
ESP_LOGI(TAG, "Auto Press Success!");
vTaskDelete(NULL);
}
static void button_auto_check_cb_1(void *arg, void *data)
{
if (iot_button_get_event(g_btns[0]) == state) {
xEventGroupSetBits(g_check, BIT(1));
}
}
static void button_auto_check_cb(void *arg, void *data)
{
if (iot_button_get_event(g_btns[0]) == state) {
ESP_LOGI(TAG, "Auto check: button event %s pass", button_event_str[state]);
xEventGroupSetBits(g_check, BIT(0));
if (++state >= BUTTON_EVENT_MAX) {
xSemaphoreGive(g_auto_check_pass);
return;
}
}
}
TEST_CASE("gpio button auto-test", "[button][iot][auto]")
{
state = BUTTON_PRESS_DOWN;
g_check = xEventGroupCreate();
g_auto_check_pass = xSemaphoreCreateBinary();
xEventGroupSetBits(g_check, BIT(0) | BIT(1));
button_config_t cfg = {
.type = BUTTON_TYPE_GPIO,
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
.gpio_button_config = {
.gpio_num = 0,
.active_level = 0,
},
};
g_btns[0] = iot_button_create(&cfg);
TEST_ASSERT_NOT_NULL(g_btns[0]);
/* register iot_button callback for all the button_event */
for (uint8_t i = 0; i < BUTTON_EVENT_MAX; i++) {
if (i == BUTTON_MULTIPLE_CLICK) {
button_event_config_t btn_cfg;
btn_cfg.event = i;
btn_cfg.event_data.multiple_clicks.clicks = 4;
iot_button_register_event_cb(g_btns[0], btn_cfg, button_auto_check_cb_1, NULL);
iot_button_register_event_cb(g_btns[0], btn_cfg, button_auto_check_cb, NULL);
} else {
iot_button_register_cb(g_btns[0], i, button_auto_check_cb_1, NULL);
iot_button_register_cb(g_btns[0], i, button_auto_check_cb, NULL);
}
}
TEST_ASSERT_EQUAL(ESP_OK, iot_button_set_param(g_btns[0], BUTTON_LONG_PRESS_TIME_MS, (void *)1500));
gpio_config_t io_conf = {
.intr_type = GPIO_INTR_DISABLE,
.mode = GPIO_MODE_OUTPUT,
.pin_bit_mask = (1ULL << GPIO_OUTPUT_IO_45),
.pull_down_en = 0,
.pull_up_en = 0,
};
gpio_config(&io_conf);
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
xTaskCreate(button_auto_press_test_task, "button_auto_press_test_task", 1024 * 4, NULL, 10, NULL);
TEST_ASSERT_EQUAL(pdTRUE, xSemaphoreTake(g_auto_check_pass, pdMS_TO_TICKS(6000)));
for (uint8_t i = 0; i < BUTTON_EVENT_MAX; i++) {
button_event_config_t btn_cfg;
btn_cfg.event = i;
if (i == BUTTON_MULTIPLE_CLICK) {
btn_cfg.event_data.multiple_clicks.clicks = 4;
} else if (i == BUTTON_LONG_PRESS_UP || i == BUTTON_LONG_PRESS_START) {
btn_cfg.event_data.long_press.press_time = 1500;
}
iot_button_unregister_event(g_btns[0], btn_cfg, button_auto_check_cb);
iot_button_unregister_event(g_btns[0], btn_cfg, button_auto_check_cb_1);
}
TEST_ASSERT_EQUAL(ESP_OK, iot_button_delete(g_btns[0]));
vEventGroupDelete(g_check);
vSemaphoreDelete(g_auto_check_pass);
vTaskDelay(pdMS_TO_TICKS(100));
}
#define TOLERANCE CONFIG_BUTTON_LONG_PRESS_TOLERANCE_MS
uint16_t long_press_time[5] = {2000, 2500, 3000, 3500, 4000};
static SemaphoreHandle_t long_press_check = NULL;
static SemaphoreHandle_t long_press_auto_check_pass = NULL;
unsigned int status = 0;
static void button_auto_long_press_test_task(void *arg)
{
// Test for BUTTON_LONG_PRESS_START
for (int i = 0; i < 5; i++) {
xSemaphoreTake(long_press_check, portMAX_DELAY);
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
status = (BUTTON_LONG_PRESS_START << 16) | long_press_time[i];
if (i > 0) {
vTaskDelay(pdMS_TO_TICKS(long_press_time[i] - long_press_time[i - 1]));
} else {
vTaskDelay(pdMS_TO_TICKS(long_press_time[i]));
}
}
vTaskDelay(pdMS_TO_TICKS(100));
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
xSemaphoreGive(long_press_auto_check_pass);
vTaskDelay(pdMS_TO_TICKS(100));
// Test for BUTTON_LONG_PRESS_UP
for (int i = 0; i < 5; i++) {
xSemaphoreTake(long_press_check, portMAX_DELAY);
status = (BUTTON_LONG_PRESS_UP << 16) | long_press_time[i];
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
vTaskDelay(pdMS_TO_TICKS(long_press_time[i] + 10));
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
}
ESP_LOGI(TAG, "Auto Long Press Success!");
vTaskDelete(NULL);
}
static void button_long_press_auto_check_cb(void *arg, void *data)
{
uint32_t value = (uint32_t)data;
uint16_t event = (0xffff0000 & value) >> 16;
uint16_t time = 0xffff & value;
uint16_t ticks_time = iot_button_get_ticks_time(g_btns[0]);
if (status == value && abs(ticks_time - time) <= TOLERANCE) {
ESP_LOGI(TAG, "Auto check: button event: %s and time: %d pass", button_event_str[event], time);
if (event == BUTTON_LONG_PRESS_UP && time == long_press_time[4]) {
xSemaphoreGive(long_press_auto_check_pass);
}
xSemaphoreGive(long_press_check);
}
}
TEST_CASE("gpio button long_press auto-test", "[button][long_press][auto]")
{
ESP_LOGI(TAG, "Starting the test");
long_press_check = xSemaphoreCreateBinary();
long_press_auto_check_pass = xSemaphoreCreateBinary();
xSemaphoreGive(long_press_check);
button_config_t cfg = {
.type = BUTTON_TYPE_GPIO,
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
.gpio_button_config = {
.gpio_num = 0,
.active_level = 0,
},
};
g_btns[0] = iot_button_create(&cfg);
TEST_ASSERT_NOT_NULL(g_btns[0]);
button_event_config_t btn_cfg;
btn_cfg.event = BUTTON_LONG_PRESS_START;
for (int i = 0; i < 5; i++) {
btn_cfg.event_data.long_press.press_time = long_press_time[i];
uint32_t data = (btn_cfg.event << 16) | long_press_time[i];
iot_button_register_event_cb(g_btns[0], btn_cfg, button_long_press_auto_check_cb, (void*)data);
}
gpio_config_t io_conf = {
.intr_type = GPIO_INTR_DISABLE,
.mode = GPIO_MODE_OUTPUT,
.pin_bit_mask = (1ULL << GPIO_OUTPUT_IO_45),
.pull_down_en = 0,
.pull_up_en = 0,
};
gpio_config(&io_conf);
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
xTaskCreate(button_auto_long_press_test_task, "button_auto_long_press_test_task", 1024 * 4, NULL, 10, NULL);
xSemaphoreTake(long_press_auto_check_pass, portMAX_DELAY);
iot_button_unregister_cb(g_btns[0], BUTTON_LONG_PRESS_START);
btn_cfg.event = BUTTON_LONG_PRESS_UP;
for (int i = 0; i < 5; i++) {
btn_cfg.event_data.long_press.press_time = long_press_time[i];
uint32_t data = (btn_cfg.event << 16) | long_press_time[i];
iot_button_register_event_cb(g_btns[0], btn_cfg, button_long_press_auto_check_cb, (void*)data);
}
TEST_ASSERT_EQUAL(pdTRUE, xSemaphoreTake(long_press_auto_check_pass, pdMS_TO_TICKS(17000)));
TEST_ASSERT_EQUAL(ESP_OK, iot_button_delete(g_btns[0]));
vSemaphoreDelete(long_press_check);
vSemaphoreDelete(long_press_auto_check_pass);
vTaskDelay(pdMS_TO_TICKS(100));
}
static void check_leak(size_t before_free, size_t after_free, const char *type)
{
ssize_t delta = after_free - before_free;
printf("MALLOC_CAP_%s: Before %u bytes free, After %u bytes free (delta %d)\n", type, before_free, after_free, delta);
TEST_ASSERT_MESSAGE(delta >= TEST_MEMORY_LEAK_THRESHOLD, "memory leak");
}
void setUp(void)
{
before_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
before_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
}
void tearDown(void)
{
size_t after_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
size_t after_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
check_leak(before_free_8bit, after_free_8bit, "8BIT");
check_leak(before_free_32bit, after_free_32bit, "32BIT");
}
void app_main(void)
{
/*
* ____ _ _ _______ _
*| _ \ | | | | |__ __| | |
*| |_) | _ _ | |_ | |_ ___ _ __ | | ___ ___ | |_
*| _ < | | | || __|| __|/ _ \ | '_ \ | | / _ \/ __|| __|
*| |_) || |_| || |_ | |_| (_) || | | | | || __/\__ \| |_
*|____/ \__,_| \__| \__|\___/ |_| |_| |_| \___||___/ \__|
*/
printf(" ____ _ _ _______ _ \n");
printf(" | _ \\ | | | | |__ __| | | \n");
printf(" | |_) | _ _ | |_ | |_ ___ _ __ | | ___ ___ | |_ \n");
printf(" | _ < | | | || __|| __|/ _ \\ | '_ \\ | | / _ \\/ __|| __|\n");
printf(" | |_) || |_| || |_ | |_| (_) || | | | | || __/\\__ \\| |_ \n");
printf(" |____/ \\__,_| \\__| \\__|\\___/ |_| |_| |_| \\___||___/ \\__|\n");
unity_run_menu();
}

View File

@ -0,0 +1,29 @@
# SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
# SPDX-License-Identifier: Apache-2.0
'''
Steps to run these cases:
- Build
- . ${IDF_PATH}/export.sh
- pip install idf_build_apps
- python tools/build_apps.py components/button/test_apps -t esp32s3
- Test
- pip install -r tools/requirements/requirement.pytest.txt
- pytest components/button/test_apps --target esp32s3
'''
import pytest
from pytest_embedded import Dut
@pytest.mark.target('esp32s3')
@pytest.mark.env('button')
@pytest.mark.parametrize(
'config',
[
'defaults',
],
)
def test_button(dut: Dut)-> None:
dut.expect_exact('Press ENTER to see the list of tests.')
dut.write('[auto]')
dut.expect_unity_test_output(timeout = 300)

View File

@ -0,0 +1 @@
351350613ceafba240b761b4ea991e0f231ac7a9f59a9ee901f751bddc0bb18f

View File

@ -0,0 +1,89 @@
## v0.5.3 - 2023-09-15
* fix `add_dependencies called with incorrect number of arguments` in `relinker.cmake`
* `include(cmake_utilities)` is not suggested now, to avoid cmake_utilities dependency issue
## v0.5.2 - 2023-09-15
* Support work on older ESP-IDF, eg: 4.3.x
## v0.5.1 - 2023-08-22
* Add string 1-byte align support
## v0.5.0 - 2023-08-02
* Add GCC LTO support
## v0.4.8 - 2023-05-24
* Add unit test app
### Bugfix:
* fix customer target redefinition issue
## v0.4.7 - 2023-04-21
* gen_compressed_ota: support the addition of a v2 compressed OTA header to compressed firmware.
## v0.4.6 - 2023-04-20
* relinker: add IDF v4.3.x support
## v0.4.5 - 2023-04-17
* gen_compressed_ota: remove slash use in gen_custom_ota.py so that the script can be used in the Windows cmd terminal.
## v0.4.4 - 2023-04-07
* relinker: suppressing the creation of `__pycache__`
* relinker: support same name objects in one library
## v0.4.3 - 2023-03-24
* relinker: support decoding to get IRAM excluded libraries
## v0.4.2 - 2023-03-20
### Bugfix:
* gen_compressed_ota: Fix the number of bytes reserved in the v3 compressed image header
* gen_compressed_ota: Fix definition of MD5 length in compressed image header for different versions.
## v0.4.1 - 2023-03-15
* relinker: add option to use customized configuration files
* relinker: add option to print error information instead of throwing exception when missing function
* relinker: move functions of SPI flash from IRAM to flash only when enable CONFIG_SPI_FLASH_ROM_IMPL
* relinker: move some functions of esp_timer from IRAM to flash only when disable CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD
## v0.4.0 - 2023-03-13
### Feature:
* Add command `idf.py gen_single_bin` to generate merged bin file
* Add command `idf.py flash_single_bin` to flash generated merged bin
* Add config `Color in diagnostics` to control the GCC color output
## v0.3.0 - 2023-03-10
* Add gen_compressed_ota functionality, please refer to [gen_compressed_ota.md](https://github.com/espressif/esp-iot-solution/tree/master/tools/cmake_utilities/docs/gen_compressed_ota.md)
## v0.2.1 - 2023-03-09
### Bugfix:
* package manager: Fix the compile issue when the name of the component has `-`, just like esp-xxx
## v0.2.0 - 2023-02-23
* Add relinker functionality, please refer to [relinker.md](https://github.com/espressif/esp-iot-solution/tree/master/tools/cmake_utilities/docs/relinker.md)
## v0.1.0 - 2023-01-12
### Feature:
* Add function cu_pkg_get_version
* Add macro cu_pkg_define_version
* Add cmake script to CMAKE_MODULE_PATH

View File

@ -0,0 +1 @@
idf_component_register()

View File

@ -0,0 +1,65 @@
menu "CMake Utilities"
config CU_RELINKER_ENABLE
bool "Enable relinker"
default n
help
"Enable relinker to linker some IRAM functions to Flash"
if CU_RELINKER_ENABLE
config CU_RELINKER_ENABLE_PRINT_ERROR_INFO_WHEN_MISSING_FUNCTION
bool "Print error information when missing function"
default y
help
"Enable this option to print error information instead of
throwing exception when missing function"
config CU_RELINKER_ENABLE_CUSTOMIZED_CONFIGURATION_FILES
bool "Enable customized relinker configuration files"
default n
help
"Enable this option to use customized relinker configuration
files instead of default ones"
if CU_RELINKER_ENABLE_CUSTOMIZED_CONFIGURATION_FILES
config CU_RELINKER_CUSTOMIZED_CONFIGURATION_FILES_PATH
string "Customized relinker configuration files path"
default ""
help
"Customized relinker configuration files path. This path is
evaluated relative to the project root directory."
endif
endif
choice CU_DIAGNOSTICS_COLOR
prompt "Color in diagnostics"
default CU_DIAGNOSTICS_COLOR_ALWAYS
help
Use color in diagnostics. "never", "always", or "auto". If "always", GCC will output
with color defined in GCC_COLORS environment variable. If "never", only output plain
text. If "auto", only output with color when the standard error is a terminal and when
not executing in an emacs shell.
config CU_DIAGNOSTICS_COLOR_NEVER
bool "never"
config CU_DIAGNOSTICS_COLOR_ALWAYS
bool "always"
config CU_DIAGNOSTICS_COLOR_AUTO
bool "auto"
endchoice
config CU_GCC_LTO_ENABLE
bool "Enable GCC link time optimization(LTO)"
default n
help
"Enable this option, users can enable GCC link time optimization(LTO)
feature for target components or dependencies.
config CU_GCC_STRING_1BYTE_ALIGN
bool "GCC string 1-byte align"
default n
help
"Enable this option, user can make string in designated components align
by 1-byte instead 1-word(4-byte), this can reduce unnecessary filled data
so that to reduce firmware size."
endmenu

View File

@ -0,0 +1,31 @@
# Cmake utilities
[![Component Registry](https://components.espressif.com/components/espressif/cmake_utilities/badge.svg)](https://components.espressif.com/components/espressif/cmake_utilities)
This component is aiming to provide some useful CMake utilities outside of ESP-IDF.
## Use
1. Add dependency of this component in your component or project's idf_component.yml.
```yml
dependencies:
espressif/cmake_utilities: "0.*"
```
2. Include the CMake file you need in your component's CMakeLists.txt after `idf_component_register`, or in your project's CMakeLists.txt
```cmake
// Note: should remove .cmake postfix when using include(), otherwise the requested file will not found
// Note: should place this line after `idf_component_register` function
// only include the one you needed.
include(package_manager)
```
3. Then you can use the corresponding CMake function which is provided by the CMake file.
## Supported features
1. [relinker](https://github.com/espressif/esp-iot-solution/blob/master/tools/cmake_utilities/docs/relinker.md)
2. [gen_compressed_ota](https://github.com/espressif/esp-iot-solution/blob/master/tools/cmake_utilities/docs/gen_compressed_ota.md)
3. [GCC Optimization](https://github.com/espressif/esp-iot-solution/blob/master/tools/cmake_utilities/docs/gcc.md)

View File

@ -0,0 +1,7 @@
# Include all cmake modules
include(gcc)
include(gen_compressed_ota)
include(gen_single_bin)
include(package_manager)
include(relinker)

View File

@ -0,0 +1,108 @@
# Link Time Optimization(LTO)
Link time optimization(LTO) improves the optimization effect of GCC, such as reducing binary size, increasing performance, and so on. For more details please refer to related [GCC documents](https://gcc.gnu.org/onlinedocs/gccint/LTO.html).
## Use
To use this feature, you need to include the required CMake file in your project's CMakeLists.txt after `project(XXXX)`.
```cmake
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
project(XXXX)
include(gcc)
```
The LTO feature is disabled by default. To use it, you should enable the option `CU_GCC_LTO_ENABLE` in menuconfig. Then specify target components or dependencies to be optimized by LTO after `include(gcc)` as follows:
```cmake
include(gcc)
cu_gcc_lto_set(COMPONENTS component_a component_b
DEPENDS dependence_a dependence_b)
cu_gcc_string_1byte_align(COMPONENTS component_c component_d
DEPENDS dependence_c dependence_d)
```
Based on your requirement, set compiling optimization level in the option `COMPILER_OPTIMIZATION`.
* Note
```
1. Reducing firmware size may decrease performance
2. Increasing performance may increase firmware size
3. Enable LTO cause compiling time cost increases a lot
4. Enable LTO may increase task stack cost
5. Enable string 1-byte align may decrease string process speed
```
## Limitation
At the linking stage, the LTO generates new function indexes instead of the file path as follows:
- LTO
```txt
.text 0x00000000420016f4 0x6 /tmp/ccdjwYMH.ltrans51.ltrans.o
0x00000000420016f4 app_main
```
- Without LTO
```txt
.text.app_main 0x00000000420016f4 0x6 esp-idf/main/libmain.a(app_main.c.obj)
0x00000000420016f4 app_main
```
So tools used to relink functions between flash and IRAM can't affect these optimized components and dependencies again. It is recommended that users had better optimize application components and dependencies than kernel and hardware driver ones.
## Example
The example applies LTO in `light` of `esp-matter` because its application code is much larger. Add LTO configuration into project script `CMakeLists.txt` as follows:
```cmake
project(light)
include(gcc)
# Add
set(app_lto_components main chip esp_matter)
# Add
set(idf_lto_components lwip wpa_supplicant nvs_flash)
# Add
set(lto_depends mbedcrypto)
# Add
cu_gcc_lto_set(COMPONENTS ${app_lto_components} ${idf_lto_components}
DEPENDS ${lto_depends})
```
Configure `ESP32-C2` as the target platform, enable `CU_GCC_LTO_ENABLE` and `CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE`, set `COMPILER_OPTIMIZATION` to be `-Os`.
Increase the `main` task stack size to `5120` by option `ESP_MAIN_TASK_STACK_SIZE`.
Compile the project, and then you can see the firmware size decrease a lot:
Option | Firmware size | Stask cost
|:-:|:-:|:-:|
-Os | 1,113,376 | 2508
-Os + LTO | 1,020,640 | 4204
Then add `cu_gcc_string_1byte_align` after `cu_gcc_lto_set`:
```cmake
# Add
cu_gcc_lto_set(COMPONENTS ${app_lto_components} ${idf_lto_components}
DEPENDS ${lto_depends})
cu_gcc_string_1byte_align(COMPONENTS ${app_lto_components} ${idf_lto_components}
DEPENDS ${lto_depends})
```
Build the project and the firmware size is:
Option | Firmware size |
|:-:|:-:|
-Os + LTO | 1,020,640 |
-Os + LTO + string 1-byte align | 1,018,340 |

View File

@ -0,0 +1,41 @@
# Gen Compressed OTA
When using the compressed OTA, we need to generate the compressed app firmware. This document mainly describes how to generate the compressed app firmware.
For more information about compressed OTA, refer to [bootloader_support_plus](https://github.com/espressif/esp-iot-solution/tree/master/components/bootloader_support_plus).
## Use
In order to use this feature, you need to include the needed CMake file in your project's CMakeLists.txt after `project(XXXX)`.
```cmake
project(XXXX)
include(gen_compressed_ota)
```
Generate the compressed app firmware in an ESP-IDF "project" directory by running:
```plaintext
idf.py gen_compressed_ota
```
This command will compile your project first, then it will generate the compressed app firmware. For example, run the command under the project `simple_ota_examples` folder. If there are no errors, the `custom_ota_binaries` folder will be created and contains the following files:
```plaintext
simple_ota.bin.xz
simple_ota.bin.xz.packed
```
The file named `simple_ota.bin.xz.packed` is the actual compressed app binary file to be transferred.
In addition, if [secure boot](https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/security/secure-boot-v2.html) is enabled, the command will generate the signed compressed app binary file:
```plaintext
simple_ota.bin.xz.packed.signed
```
you can also use the script [gen_custom_ota.py](https://github.com/espressif/esp-iot-solution/tree/master/tools/cmake_utilities/scripts/gen_custom_ota.py) to compress the specified app:
```plaintext
python3 gen_custom_ota.py -i simple_ota.bin
```

View File

@ -0,0 +1,66 @@
# Relinker
In ESP-IDF, some functions are put in SRAM when link stage, the reason is that some functions are critical, we need to put them in SRAM to speed up the program, or the functions will be executed when the cache is disabled. But actually, some functions can be put into Flash, here, we provide a script to let the user set the functions which are located in SRAM by default to put them into Flash, in order to save more SRAM which can be used as heap region later. This happens in the linker stage, so we call it as relinker.
## Use
In order to use this feature, you need to include the needed CMake file in your project's CMakeLists.txt after `project(XXXX)`.
```cmake
project(XXXX)
include(relinker)
```
The relinker feature is disabled by default, in order to use it, you need to enable the option `CU_RELINKER_ENABLE` in menuconfig.
Here are the default configuration files in the folder `cmake_utilities/scripts/relinker/examples/esp32c2`, it's just used as a reference. If you would like to use your own configuration files, please enable option `CU_RELINKER_ENABLE_CUSTOMIZED_CONFIGURATION_FILES` and set the path of your configuration files as following, this path is evaluated relative to the project root directory:
```
[*] Enable customized relinker configuration files
(path of your configuration files) Customized relinker configuration files path
```
> Note: Currently only esp32c2 is supported.
## Configuration Files
You can refer to the files in the directory of `cmake_utilities/scripts/relinker/examples/esp32c2`:
- library.csv
- object.csv
- function.csv
For example, if you want to link function `__getreent` from SRAM to Flash, firstly you should add it to `function.csv` file as following:
```
libfreertos.a,tasks.c.obj,__getreent,
```
This means function `__getreent` is in object file `tasks.c.obj`, and object file `tasks.c.obj` is in library `libfreertos.a`.
If function `__getreent` depends on the option `FREERTOS_PLACE_FUNCTIONS_INTO_FLASH` in menuconfig, then it should be:
```
libfreertos.a,tasks.c.obj,__getreent,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
```
This means when only `FREERTOS_PLACE_FUNCTIONS_INTO_FLASH` is enabled in menuconfig, function `__getreent` will be linked from SRAM to Flash.
Next step you should add the path of the object file to `object.csv`:
```
libfreertos.a,tasks.c.obj,esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/tasks.c.obj
```
This means the object file `tasks.c.obj` is in library `libfreertos.a` and its location is `esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/tasks.c.obj` relative to directory of `build`.
Next step you should add path of library to `library.csv`:
```
libfreertos.a,./esp-idf/freertos/libfreertos.a
```
This means library `libfreertos.a`'s location is `./esp-idf/freertos/libfreertos.a` relative to `build`.
If above related data has exists in corresponding files, please don't add this repeatedly.

View File

@ -0,0 +1,84 @@
if(CONFIG_CU_GCC_LTO_ENABLE)
# Enable cmake interprocedural optimization(IPO) support to check if GCC supports link time optimization(LTO)
cmake_policy(SET CMP0069 NEW)
include(CheckIPOSupported)
# Compare to "ar" and "ranlib", "gcc-ar" and "gcc-ranlib" integrate GCC LTO plugin
set(CMAKE_AR ${_CMAKE_TOOLCHAIN_PREFIX}gcc-ar)
set(CMAKE_RANLIB ${_CMAKE_TOOLCHAIN_PREFIX}gcc-ranlib)
macro(cu_gcc_lto_set)
check_ipo_supported(RESULT result)
if(result)
message(STATUS "GCC link time optimization(LTO) is enable")
set(multi_value COMPONENTS DEPENDS)
cmake_parse_arguments(LTO "" "" "${multi_value}" ${ARGN})
# Use full format LTO object file
set(GCC_LTO_OBJECT_TYPE "-ffat-lto-objects")
# Set compression level 9(min:0, max:9)
set(GCC_LTO_COMPRESSION_LEVEL "-flto-compression-level=9")
# Set partition level max to removed used symbol
set(GCC_LTO_PARTITION_LEVEL "-flto-partition=max")
# Set mode "auto" to increase compiling speed
set(GCC_LTO_COMPILE_OPTIONS "-flto=auto"
${GCC_LTO_OBJECT_TYPE}
${GCC_LTO_COMPRESSION_LEVEL})
# Enable GCC LTO and plugin when linking stage
set(GCC_LTO_LINK_OPTIONS "-flto"
"-fuse-linker-plugin"
${GCC_LTO_OBJECT_TYPE}
${GCC_LTO_PARTITION_LEVEL})
message(STATUS "GCC LTO for components: ${LTO_COMPONENTS}")
foreach(c ${LTO_COMPONENTS})
idf_component_get_property(t ${c} COMPONENT_LIB)
target_compile_options(${t} PRIVATE ${GCC_LTO_COMPILE_OPTIONS})
endforeach()
message(STATUS "GCC LTO for dependencies: ${LTO_DEPENDS}")
foreach(d ${LTO_DEPENDS})
target_compile_options(${d} PRIVATE ${GCC_LTO_COMPILE_OPTIONS})
endforeach()
if("${IDF_VERSION_MAJOR}.${IDF_VERSION_MINOR}" VERSION_GREATER_EQUAL "4.4")
target_link_libraries(${project_elf} PRIVATE ${GCC_LTO_LINK_OPTIONS})
else()
target_link_libraries(${project_elf} ${GCC_LTO_LINK_OPTIONS})
endif()
else()
message(FATAL_ERROR "GCC link time optimization(LTO) is not supported")
endif()
endmacro()
else()
macro(cu_gcc_lto_set)
message(STATUS "GCC link time optimization(LTO) is not enable")
endmacro()
endif()
if(CONFIG_CU_GCC_STRING_1BYTE_ALIGN)
macro(cu_gcc_string_1byte_align)
message(STATUS "GCC string 1-byte align is enable")
set(multi_value COMPONENTS DEPENDS)
cmake_parse_arguments(STR_ALIGN "" "" "${multi_value}" ${ARGN})
message(STATUS "GCC string 1-byte align for components: ${STR_ALIGN_COMPONENTS}")
foreach(c ${STR_ALIGN_COMPONENTS})
idf_component_get_property(t ${c} COMPONENT_LIB)
target_compile_options(${t} PRIVATE "-malign-data=natural")
endforeach()
message(STATUS "GCC string 1-byte align for dependencies: ${STR_ALIGN_DEPENDS}")
foreach(d ${STR_ALIGN_DEPENDS})
target_compile_options(${d} PRIVATE "-malign-data=natural")
endforeach()
endmacro()
else()
macro(cu_gcc_string_1byte_align)
message(STATUS "GCC string 1-byte align is not enable")
endmacro()
endif()

View File

@ -0,0 +1,18 @@
if (NOT TARGET gen_compressed_ota)
add_custom_target(gen_compressed_ota)
if (CONFIG_SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT OR CONFIG_SECURE_BOOT_V2_ENABLED)
set(COMPRESSED_OTA_BIN_SIGN_PARA --sign_key ${PROJECT_DIR}/${CONFIG_SECURE_BOOT_SIGNING_KEY})
else()
set(COMPRESSED_OTA_BIN_SIGN_PARA )
endif()
set(GEN_COMPRESSED_BIN_CMD ${CMAKE_CURRENT_LIST_DIR}/scripts/gen_custom_ota.py ${COMPRESSED_OTA_BIN_SIGN_PARA} --add_app_header)
add_custom_command(TARGET gen_compressed_ota
POST_BUILD
COMMAND ${PYTHON} ${GEN_COMPRESSED_BIN_CMD}
COMMENT "The gen compresssed bin cmd is: ${GEN_COMPRESSED_BIN_CMD}"
)
add_dependencies(gen_compressed_ota gen_project_binary)
endif()

View File

@ -0,0 +1,27 @@
# Extend command to idf.py
# Generate single bin with name ${CMAKE_PROJECT_NAME}_merged.bin
if (NOT TARGET gen_single_bin)
add_custom_target(
gen_single_bin
COMMAND ${CMAKE_COMMAND} -E echo "Merge bin files to ${CMAKE_PROJECT_NAME}_merged.bin"
COMMAND ${ESPTOOLPY} --chip ${IDF_TARGET} merge_bin -o ${CMAKE_PROJECT_NAME}_merged.bin @flash_args
COMMAND ${CMAKE_COMMAND} -E echo "Merge bin done"
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
DEPENDS gen_project_binary bootloader
VERBATIM USES_TERMINAL
)
endif()
# Flash bin ${CMAKE_PROJECT_NAME}_merged.bin to target chip
if (NOT TARGET flash_single_bin)
add_custom_target(
flash_single_bin
COMMAND ${CMAKE_COMMAND} -E echo "Flash merged bin ${CMAKE_PROJECT_NAME}_merged.bin to address 0x0"
COMMAND ${ESPTOOLPY} --chip ${IDF_TARGET} write_flash 0x0 ${CMAKE_PROJECT_NAME}_merged.bin
COMMAND ${CMAKE_COMMAND} -E echo "Flash merged bin done"
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
DEPENDS gen_single_bin
VERBATIM USES_TERMINAL
)
endif()

View File

@ -0,0 +1,7 @@
dependencies:
idf:
version: '>=4.1'
description: A collection of useful cmake utilities
issues: https://github.com/espressif/esp-iot-solution/issues
url: https://github.com/espressif/esp-iot-solution/tree/master/tools/cmake_utilities
version: 0.5.3

View File

@ -0,0 +1,45 @@
# cu_pkg_get_version
#
# @brief Get the package's version information, the package is installed by component manager.
#
# @param[in] pkg_path the package's path, normally it's ${CMAKE_CURRENT_LIST_DIR}.
#
# @param[out] ver_major the major version of the package
# @param[out] ver_minor the minor version of the package
# @param[out] ver_patch the patch version of the package
function(cu_pkg_get_version pkg_path ver_major ver_minor ver_patch)
set(yml_file "${pkg_path}/idf_component.yml")
if(EXISTS ${yml_file})
file(READ ${yml_file} ver)
string(REGEX MATCH "(^|\n)version: \"?([0-9]+).([0-9]+).([0-9]+)\"?" _ ${ver})
set(${ver_major} ${CMAKE_MATCH_2} PARENT_SCOPE)
set(${ver_minor} ${CMAKE_MATCH_3} PARENT_SCOPE)
set(${ver_patch} ${CMAKE_MATCH_4} PARENT_SCOPE)
else()
message(WARNING " ${yml_file} not exist")
endif()
endfunction()
# cu_pkg_define_version
#
# @brief Add the package's version definitions using format ${NAME}_VER_MAJOR ${NAME}_VER_MINOR ${NAME}_VER_PATCH,
# the ${NAME} will be inferred from package path, and namespace like `espressif__` will be removed if the package download from esp-registry
# eg. espressif__usb_stream and usb_stream will generate same version definitions USB_STREAM_VER_MAJOR ...
#
# @param[in] pkg_path the package's path, normally it's ${CMAKE_CURRENT_LIST_DIR}.
#
macro(cu_pkg_define_version pkg_path)
cu_pkg_get_version(${pkg_path} ver_major ver_minor ver_patch)
get_filename_component(pkg_name ${pkg_path} NAME)
string(FIND ${pkg_name} "__" pkg_name_pos)
if(pkg_name_pos GREATER -1)
math(EXPR pkg_name_pos "${pkg_name_pos} + 2")
string(SUBSTRING ${pkg_name} ${pkg_name_pos} -1 pkg_name)
endif()
string(TOUPPER ${pkg_name} pkg_name)
string(REPLACE "-" "_" pkg_name ${pkg_name})
message(STATUS "${pkg_name}: ${ver_major}.${ver_minor}.${ver_patch}")
list(LENGTH pkg_name_list len)
target_compile_options(${COMPONENT_LIB} PUBLIC
-D${pkg_name}_VER_MAJOR=${ver_major} -D${pkg_name}_VER_MINOR=${ver_minor} -D${pkg_name}_VER_PATCH=${ver_patch})
endmacro()

View File

@ -0,0 +1,9 @@
set(CMAKE_MODULE_PATH ${CMAKE_CURRENT_LIST_DIR} ${CMAKE_MODULE_PATH})
if(CONFIG_CU_DIAGNOSTICS_COLOR_ALWAYS)
add_compile_options(-fdiagnostics-color=always)
elseif(CONFIG_CU_DIAGNOSTICS_COLOR_AUTO)
add_compile_options(-fdiagnostics-color=auto)
elseif(CONFIG_CU_DIAGNOSTICS_COLOR_NEVER)
add_compile_options(-fdiagnostics-color=never)
endif()

View File

@ -0,0 +1,73 @@
# @brief Link designated functions from SRAM to Flash to save SRAM
if(CONFIG_CU_RELINKER_ENABLE)
# project_elf variable is only in project.cmake
if(NOT TARGET customer_sections AND DEFINED project_elf)
message(STATUS "Relinker is enabled.")
if(CONFIG_IDF_TARGET_ESP32C2)
set(target "esp32c2")
else()
message(FATAL_ERROR "Other targets are not supported.")
endif()
if(CONFIG_CU_RELINKER_ENABLE_CUSTOMIZED_CONFIGURATION_FILES)
idf_build_get_property(project_dir PROJECT_DIR)
get_filename_component(cfg_file_path "${CONFIG_CU_RELINKER_CUSTOMIZED_CONFIGURATION_FILES_PATH}"
ABSOLUTE BASE_DIR "${project_dir}")
if(NOT EXISTS "${cfg_file_path}")
message(FATAL_ERROR "Relinker Configuration files path ${cfg_file_path} is not found.")
endif()
else()
set(cfg_file_path ${PROJECT_DIR}/relinker/${target})
if(NOT EXISTS ${cfg_file_path})
set(cfg_file_path ${CMAKE_CURRENT_LIST_DIR}/scripts/relinker/examples/${target})
endif()
endif()
message(STATUS "Relinker configuration files: ${cfg_file_path}")
set(library_file "${cfg_file_path}/library.csv")
set(object_file "${cfg_file_path}/object.csv")
set(function_file "${cfg_file_path}/function.csv")
set(relinker_script "${CMAKE_CURRENT_LIST_DIR}/scripts/relinker/relinker.py")
set(cmake_objdump "${CMAKE_OBJDUMP}")
set(link_path "${CMAKE_BINARY_DIR}/esp-idf/esp_system/ld")
set(link_src_file "${link_path}/sections.ld")
set(link_dst_file "${link_path}/customer_sections.ld")
set(relinker_opts --input ${link_src_file}
--output ${link_dst_file}
--library ${library_file}
--object ${object_file}
--function ${function_file}
--sdkconfig ${sdkconfig}
--objdump ${cmake_objdump})
if(CONFIG_CU_RELINKER_ENABLE_PRINT_ERROR_INFO_WHEN_MISSING_FUNCTION)
list(APPEND relinker_opts --missing_function_info True)
endif()
idf_build_get_property(link_depends __LINK_DEPENDS)
add_custom_command(OUTPUT ${link_dst_file}
COMMAND ${python} -B ${relinker_script}
${relinker_opts}
COMMAND ${CMAKE_COMMAND} -E copy
${link_dst_file}
${link_src_file}
COMMAND ${CMAKE_COMMAND} -E echo
/*relinker*/ >>
${link_dst_file}
DEPENDS "${link_depends}"
"${library_file}"
"${object_file}"
"${function_file}"
VERBATIM)
add_custom_target(customer_sections DEPENDS ${link_dst_file})
add_dependencies(${project_elf} customer_sections)
endif()
else()
message(STATUS "Relinker isn't enabled.")
endif()

View File

@ -0,0 +1,243 @@
#!/usr/bin/env python
#
# SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
#
# SPDX-License-Identifier: Apache-2.0
import sys
import struct
import argparse
import binascii
import hashlib
import os
import subprocess
import shutil
import json
import lzma
# src_file = 'hello-world.bin'
# compressed_file = 'hello-world.bin.xz'
# packed_compressed_file = 'hello-world.bin.xz.packed'
# siged_packed_compressed_file = 'hello-world.bin.xz.packed.signed'
binary_compress_type = {'none': 0, 'xz':1}
header_version = {'v1': 1, 'v2': 2, 'v3': 3}
SCRIPT_VERSION = '1.0.0'
ORIGIN_APP_IMAGE_HEADER_LEN = 288 # sizeof(esp_image_header_t) + sizeof(esp_image_segment_header_t) + sizeof(esp_app_desc_t). See esp_app_format.h
# At present, we calculate the checksum of the first 4KB data of the old app.
OLD_APP_CHECK_DATA_SIZE = 4096
# v1 compressed data header:
# Note: Encryption_type field is deprecated, the field is reserved for compatibility.
# |------|---------|---------|----------|------------|------------|-----------|----------|----------------|----------------|--------------|------------|
# | | Magic | header | Compress | delta | Encryption | Reserved | Firmware | The length of | The MD5 of | The CRC32 for| compressed |
# | | number | version | type | type | type | | version | compressed data| compressed data| the header | data |
# |------|---------|---------|----------|------------|------------|-----------|----------|----------------|----------------|--------------|------------|
# | Size | 4 bytes | 1 byte | 4 bits | 4 bits | 1 bytes | 1 bytes | 32 bytes | 4 bytes | 32 bytes | 4 bytes | |
# |------|---------|---------|----------|------------|------------|-----------|----------|----------------|----------------|--------------|------------|
# | Data | String | | | | | | String | little-endian | byte string | little-endian| |
# | type | ended | | | | | | ended | integer | | integer | |
# | |with ‘\0’| | | | | | with ‘\0’| | | | Binary data|
# |------|---------|---------|----------|------------|------------|-----------|----------|----------------|----------------|--------------|------------|
# | Data | “ESP” | 1 | 0/1 | 0/1 | | | | | | | |
# |------|---------|---------|----------|------------|------------|-----------|----------|----------------|----------------|--------------|------------|
# v2 compressed data header
# Note: Encryption_type field is deprecated, the field is reserved for compatibility.
# |------|---------|---------|----------|------------|------------|-----------|----------|----------------|----------------|---------------|---------------|--------------|------------|
# | | Magic | header | Compress | delta | Encryption | Reserved | Firmware | The length of | The MD5 of | base app check| The CRC32 for | The CRC32 for| compressed |
# | | number | version | type | type | type | | version | compressed data| compressed data| data len | base app data | the header | data |
# |------|---------|---------|----------|------------|------------|-----------|----------|----------------|----------------|---------------|---------------|--------------|------------|
# | Size | 4 bytes | 1 byte | 4 bits | 4 bits | 1 bytes | 1 bytes | 32 bytes | 4 bytes | 32 bytes | 4 bytes | 4 bytes | 4 bytes | |
# |------|---------|---------|----------|------------|------------|-----------|----------|----------------|----------------|---------------|---------------|--------------|------------|
# | Data | String | | | | | | String | little-endian | byte string | little-endian | little-endian | little-endian| |
# | type | ended | | | | | | ended | integer | | integer | integer | integer | |
# | |with ‘\0’| | | | | | with ‘\0’| | | | | | Binary data|
# |------|---------|---------|----------|------------|------------|-----------|----------|----------------|----------------|---------------|---------------|--------------|------------|
# | Data | “ESP” | 1 | 0/1 | 0/1 | | | | | | | | | |
# |------|---------|---------|----------|------------|------------|-----------|----------|----------------|----------------|---------------|---------------|--------------|------------|
# v3 compressed data header:
# |------|---------|---------|----------|------------|-----------|----------------|----------------|--------------|------------|
# | | Magic | header | Compress | Reserved | Reserved | The length of | The MD5 of | The CRC32 for| compressed |
# | | number | version | type | | | compressed data| compressed data| the header | data |
# |------|---------|---------|----------|------------|-----------|----------------|----------------|--------------|------------|
# | Size | 4 bytes | 1 byte | 4 bits | 4 bits | 8 bytes | 4 bytes | 16 bytes | 4 bytes | |
# |------|---------|---------|----------|------------|-----------|----------------|----------------|--------------|------------|
# | Data | String | integer | | | | little-endian | byte string | little-endian| |
# | type | ended | | | | | integer | | integer | |
# | |with ‘\0’| | | | | | | | Binary data|
# |------|---------|---------|----------|------------|-----------|----------------|----------------|--------------|------------|
# | Data | “ESP” | 3 | 0/1 | | | | | | |
# |------|---------|---------|----------|------------|-----------|----------------|----------------|--------------|------------|
def xz_compress(store_directory, in_file):
compressed_file = ''.join([in_file,'.xz'])
if(os.path.exists(compressed_file)):
os.remove(compressed_file)
xz_compressor_filter = [
{"id": lzma.FILTER_LZMA2, "preset": 6, "dict_size": 64*1024},
]
with open(in_file, 'rb') as src_f:
data = src_f.read()
with lzma.open(compressed_file, "wb", format=lzma.FORMAT_XZ, check=lzma.CHECK_CRC32, filters=xz_compressor_filter) as f:
f.write(data)
f.close()
if not os.path.exists(os.path.join(store_directory, os.path.split(compressed_file)[1])):
shutil.copy(compressed_file, store_directory)
print('copy xz file done')
def secure_boot_sign(sign_key, in_file, out_file):
ret = subprocess.call('espsecure.py sign_data --version 2 --keyfile {} --output {} {}'.format(sign_key, out_file, in_file), shell = True)
if ret:
raise Exception('sign failed')
def get_app_name():
with open('flasher_args.json') as f:
try:
flasher_args = json.load(f)
return flasher_args['app']['file']
except Exception as e:
print(e)
return ''
def get_script_version():
return SCRIPT_VERSION
def main():
parser = argparse.ArgumentParser()
parser.add_argument('-hv', '--header_ver', nargs='?', choices = ['v1', 'v2', 'v3'],
default='v3', help='the version of the packed file header [default:v3]')
parser.add_argument('-c', '--compress_type', nargs= '?', choices = ['none', 'xz'],
default='xz', help='compressed type [default:xz]')
parser.add_argument('-i', '--in_file', nargs = '?',
default='', help='the new app firmware')
parser.add_argument('--sign_key', nargs = '?',
default='', help='the sign key used for secure boot')
parser.add_argument('-fv', '--fw_ver', nargs='?',
default='', help='the version of the compressed data(this field is deprecated in v3)')
parser.add_argument('--add_app_header', action="store_true", help='add app header to use native esp_ota_* & esp_https_ota_* APIs')
parser.add_argument('-v', '--version', action='version', version=get_script_version(), help='the version of the script')
args = parser.parse_args()
compress_type = args.compress_type
firmware_ver = args.fw_ver
src_file = args.in_file
sign_key = args.sign_key
header_ver = args.header_ver
add_app_header = args.add_app_header
if src_file == '':
origin_app_name = get_app_name()
if(origin_app_name == ''):
print('get origin app name fail')
return
if os.path.exists(origin_app_name):
src_file = origin_app_name
else:
print('origin app.bin not found')
return
print('src file is: {}'.format(src_file))
# rebuild the cpmpressed_app directroy
cpmoressed_app_directory = 'custom_ota_binaries'
if os.path.exists(cpmoressed_app_directory):
shutil.rmtree(cpmoressed_app_directory)
os.mkdir(cpmoressed_app_directory)
print('The compressed file will store in {}'.format(cpmoressed_app_directory))
#step1: compress
if compress_type == 'xz':
xz_compress(cpmoressed_app_directory, os.path.abspath(src_file))
origin_app_name = os.path.split(src_file)[1]
compressed_file_name = ''.join([origin_app_name, '.xz'])
compressed_file = os.path.join(cpmoressed_app_directory, compressed_file_name)
else:
compressed_file = ''.join(src_file)
print('compressed file is: {}'.format(compressed_file))
#step2: packet the compressed image header
with open(src_file, 'rb') as s_f:
src_image_header = bytearray(s_f.read(ORIGIN_APP_IMAGE_HEADER_LEN))
src_image_header[1] = 0x00
packed_file = ''.join([compressed_file,'.packed'])
with open(compressed_file, 'rb') as src_f:
data = src_f.read()
f_len = src_f.tell()
# magic number
bin_data = struct.pack('4s', b'ESP')
# header version
bin_data += struct.pack('B', header_version[header_ver])
# Compress type
bin_data += struct.pack('B', binary_compress_type[compress_type])
print('compressed type: {}'.format(binary_compress_type[compress_type]))
# in header v1/v2, there is a field "Encryption type", this field has been deprecated in v3
if (header_version[header_ver] < 3):
bin_data += struct.pack('B', 0)
# Reserved
bin_data += struct.pack('?', 0)
# Firmware version
bin_data += struct.pack('32s', firmware_ver.encode())
else:
# Reserved
bin_data += struct.pack('10s', b'0')
# The length of the compressed data
bin_data += struct.pack('<I', f_len)
print('compressed data len: {}'.format(f_len))
# The MD5 for the compressed data
if (header_version[header_ver] < 3):
bin_data += struct.pack('32s', hashlib.md5(data).digest())
if (header_version[header_ver] == 2):
# Todo, if it's diff OTA, write base app check data len
bin_data += struct.pack('<I', 0)
# Todo, if it's diff OTA, write base app crc32 checksum
bin_data += struct.pack('<I', 0)
else:
bin_data += struct.pack('16s', hashlib.md5(data).digest())
# The CRC32 for the header
bin_data += struct.pack('<I', binascii.crc32(bin_data, 0x0))
# write compressed data
bin_data += data
with open(packed_file, 'wb') as dst_f:
# write compressed image header and compressed dada
dst_f.write(bin_data)
print('packed file is: {}'.format(packed_file))
#step3: if need sign, then sign the packed image
if sign_key != '':
signed_file = ''.join([packed_file,'.signed'])
secure_boot_sign(sign_key, packed_file, signed_file)
print('signed_file is: {}'.format(signed_file))
else:
signed_file = ''.join(packed_file)
if (header_version[header_ver] == 3) and add_app_header:
with open(signed_file, 'rb+') as src_f:
packed_data = src_f.read()
src_f.seek(0)
# write origin app image header
src_f.write(src_image_header)
# write compressed image header and compressed dada
src_f.write(packed_data)
print('app image header has been added')
if __name__ == '__main__':
try:
main()
except Exception as e:
print(e)
sys.exit(2)

View File

@ -0,0 +1,211 @@
#!/usr/bin/env python3
#
# SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
# SPDX-License-Identifier: Apache-2.0
import argparse
import csv
import os
import subprocess
import sys
import re
from io import StringIO
OPT_MIN_LEN = 7
espidf_objdump = None
espidf_missing_function_info = True
class sdkconfig_c:
def __init__(self, path):
lines = open(path).read().splitlines()
config = dict()
for l in lines:
if len(l) > OPT_MIN_LEN and l[0] != '#':
mo = re.match( r'(.*)=(.*)', l, re.M|re.I)
if mo:
config[mo.group(1)]=mo.group(2).replace('"', '')
self.config = config
def index(self, i):
return self.config[i]
def check(self, options):
options = options.replace(' ', '')
if '&&' in options:
for i in options.split('&&'):
if i[0] == '!':
i = i[1:]
if i in self.config:
return False
else:
if i not in self.config:
return False
else:
i = options
if i[0] == '!':
i = i[1:]
if i in self.config:
return False
else:
if i not in self.config:
return False
return True
class object_c:
def read_dump_info(self, pathes):
new_env = os.environ.copy()
new_env['LC_ALL'] = 'C'
dumps = list()
print('pathes:', pathes)
for path in pathes:
try:
dump = StringIO(subprocess.check_output([espidf_objdump, '-t', path], env=new_env).decode())
dumps.append(dump.readlines())
except subprocess.CalledProcessError as e:
raise RuntimeError('cmd:%s result:%s'%(e.cmd, e.returncode))
return dumps
def get_func_section(self, dumps, func):
for dump in dumps:
for l in dump:
if ' %s'%(func) in l and '*UND*' not in l:
m = re.match(r'(\S*)\s*([glw])\s*([F|O])\s*(\S*)\s*(\S*)\s*(\S*)\s*', l, re.M|re.I)
if m and m[6] == func:
return m[4].replace('.text.', '')
if espidf_missing_function_info:
print('%s failed to find section'%(func))
return None
else:
raise RuntimeError('%s failed to find section'%(func))
def __init__(self, name, pathes, libray):
self.name = name
self.libray = libray
self.funcs = dict()
self.pathes = pathes
self.dumps = self.read_dump_info(pathes)
def append(self, func):
section = self.get_func_section(self.dumps, func)
if section != None:
self.funcs[func] = section
def functions(self):
nlist = list()
for i in self.funcs:
nlist.append(i)
return nlist
def sections(self):
nlist = list()
for i in self.funcs:
nlist.append(self.funcs[i])
return nlist
class library_c:
def __init__(self, name, path):
self.name = name
self.path = path
self.objs = dict()
def append(self, obj, path, func):
if obj not in self.objs:
self.objs[obj] = object_c(obj, path, self.name)
self.objs[obj].append(func)
class libraries_c:
def __init__(self):
self.libs = dict()
def append(self, lib, lib_path, obj, obj_path, func):
if lib not in self.libs:
self.libs[lib] = library_c(lib, lib_path)
self.libs[lib].append(obj, obj_path, func)
def dump(self):
for libname in self.libs:
lib = self.libs[libname]
for objname in lib.objs:
obj = lib.objs[objname]
print('%s, %s, %s, %s'%(libname, objname, obj.path, obj.funcs))
class paths_c:
def __init__(self):
self.paths = dict()
def append(self, lib, obj, path):
if '$IDF_PATH' in path:
path = path.replace('$IDF_PATH', os.environ['IDF_PATH'])
if lib not in self.paths:
self.paths[lib] = dict()
if obj not in self.paths[lib]:
self.paths[lib][obj] = list()
self.paths[lib][obj].append(path)
def index(self, lib, obj):
if lib not in self.paths:
return None
if '*' in self.paths[lib]:
obj = '*'
return self.paths[lib][obj]
def generator(library_file, object_file, function_file, sdkconfig_file, missing_function_info, objdump='riscv32-esp-elf-objdump'):
global espidf_objdump, espidf_missing_function_info
espidf_objdump = objdump
espidf_missing_function_info = missing_function_info
sdkconfig = sdkconfig_c(sdkconfig_file)
lib_paths = paths_c()
for p in csv.DictReader(open(library_file, 'r')):
lib_paths.append(p['library'], '*', p['path'])
obj_paths = paths_c()
for p in csv.DictReader(open(object_file, 'r')):
obj_paths.append(p['library'], p['object'], p['path'])
libraries = libraries_c()
for d in csv.DictReader(open(function_file, 'r')):
if d['option'] and sdkconfig.check(d['option']) == False:
print('skip %s(%s)'%(d['function'], d['option']))
continue
lib_path = lib_paths.index(d['library'], '*')
obj_path = obj_paths.index(d['library'], d['object'])
if not obj_path:
obj_path = lib_path
libraries.append(d['library'], lib_path[0], d['object'], obj_path, d['function'])
return libraries
def main():
argparser = argparse.ArgumentParser(description='Libraries management')
argparser.add_argument(
'--library', '-l',
help='Library description file',
type=str)
argparser.add_argument(
'--object', '-b',
help='Object description file',
type=str)
argparser.add_argument(
'--function', '-f',
help='Function description file',
type=str)
argparser.add_argument(
'--sdkconfig', '-s',
help='sdkconfig file',
type=str)
args = argparser.parse_args()
libraries = generator(args.library, args.object, args.function, args.sdkconfig)
# libraries.dump()
if __name__ == '__main__':
main()

View File

@ -0,0 +1,365 @@
library,object,function,option
libble_app.a,ble_hw.c.o,r_ble_hw_resolv_list_get_cur_entry,
libble_app.a,ble_ll_adv.c.o,r_ble_ll_adv_set_sched,
libble_app.a,ble_ll_adv.c.o,r_ble_ll_adv_sync_pdu_make,
libble_app.a,ble_ll_adv.c.o,r_ble_ll_adv_sync_calculate,
libble_app.a,ble_ll_conn.c.o,r_ble_ll_conn_is_dev_connected,
libble_app.a,ble_ll_ctrl.c.o,r_ble_ll_ctrl_tx_done,
libble_app.a,ble_lll_adv.c.o,r_ble_lll_adv_aux_scannable_pdu_payload_len,
libble_app.a,ble_lll_adv.c.o,r_ble_lll_adv_halt,
libble_app.a,ble_lll_adv.c.o,r_ble_lll_adv_periodic_schedule_next,
libble_app.a,ble_lll_conn.c.o,r_ble_lll_conn_cth_flow_free_credit,
libble_app.a,ble_lll_conn.c.o,r_ble_lll_conn_update_encryption,
libble_app.a,ble_lll_conn.c.o,r_ble_lll_conn_set_slave_flow_control,
libble_app.a,ble_lll_conn.c.o,r_ble_lll_init_rx_pkt_isr,
libble_app.a,ble_lll_conn.c.o,r_ble_lll_conn_get_rx_mbuf,
libble_app.a,ble_lll_rfmgmt.c.o,r_ble_lll_rfmgmt_enable,
libble_app.a,ble_lll_rfmgmt.c.o,r_ble_lll_rfmgmt_timer_reschedule,
libble_app.a,ble_lll_rfmgmt.c.o,r_ble_lll_rfmgmt_timer_exp,
libble_app.a,ble_lll_scan.c.o,r_ble_lll_scan_targeta_is_matched,
libble_app.a,ble_lll_scan.c.o,r_ble_lll_scan_rx_isr_on_legacy,
libble_app.a,ble_lll_scan.c.o,r_ble_lll_scan_rx_isr_on_aux,
libble_app.a,ble_lll_scan.c.o,r_ble_lll_scan_process_rsp_in_isr,
libble_app.a,ble_lll_scan.c.o,r_ble_lll_scan_rx_pkt_isr,
libble_app.a,ble_lll_sched.c.o,r_ble_lll_sched_execute_check,
libble_app.a,ble_lll_sync.c.o,r_ble_lll_sync_event_start_cb,
libble_app.a,ble_phy.c.o,r_ble_phy_set_rxhdr,
libble_app.a,ble_phy.c.o,r_ble_phy_update_conn_sequence,
libble_app.a,ble_phy.c.o,r_ble_phy_set_sequence_mode,
libble_app.a,ble_phy.c.o,r_ble_phy_txpower_round,
libble_app.a,os_mempool.c.obj,r_os_memblock_put,
libbootloader_support.a,bootloader_flash.c.obj,bootloader_read_flash_id,
libbootloader_support.a,flash_encrypt.c.obj,esp_flash_encryption_enabled,
libbt.a,bt_osi_mem.c.obj,bt_osi_mem_calloc,CONFIG_BT_ENABLED
libbt.a,bt_osi_mem.c.obj,bt_osi_mem_malloc,CONFIG_BT_ENABLED
libbt.a,bt_osi_mem.c.obj,bt_osi_mem_malloc_internal,CONFIG_BT_ENABLED
libbt.a,bt_osi_mem.c.obj,bt_osi_mem_free,CONFIG_BT_ENABLED
libbt.a,bt.c.obj,esp_reset_rpa_moudle,CONFIG_BT_ENABLED
libbt.a,bt.c.obj,osi_assert_wrapper,CONFIG_BT_ENABLED
libbt.a,bt.c.obj,osi_random_wrapper,CONFIG_BT_ENABLED
libbt.a,nimble_port.c.obj,nimble_port_run,CONFIG_BT_NIMBLE_ENABLED
libbt.a,nimble_port.c.obj,nimble_port_get_dflt_eventq,CONFIG_BT_NIMBLE_ENABLED
libbt.a,npl_os_freertos.c.obj,os_callout_timer_cb,CONFIG_BT_ENABLED && !CONFIG_BT_NIMBLE_USE_ESP_TIMER
libbt.a,npl_os_freertos.c.obj,npl_freertos_event_run,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_callout_stop,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_time_get,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_callout_reset,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_callout_is_active,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_callout_get_ticks,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_callout_remaining_ticks,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_time_delay,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_eventq_is_empty,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_mutex_pend,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_mutex_release,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_sem_init,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_sem_pend,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_sem_release,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_callout_init,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_callout_deinit,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_event_is_queued,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_event_get_arg,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_time_ms_to_ticks32,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_time_ticks_to_ms32,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_hw_is_in_critical,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_get_time_forever,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_os_started,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_get_current_task_id,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_event_reset,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_callout_mem_reset,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_event_init,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_sem_get_count,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_eventq_remove,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_hw_exit_critical,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_mutex_init,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_hw_enter_critical,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_eventq_put,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_eventq_get,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_sem_deinit,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_mutex_deinit,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_eventq_deinit,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_eventq_init,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_event_deinit,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_time_ticks_to_ms,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_time_ms_to_ticks,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_callout_set_arg,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_event_set_arg,CONFIG_BT_ENABLED
libbt.a,npl_os_freertos.c.obj,npl_freertos_eventq_put,CONFIG_BT_ENABLED
libdriver.a,gpio.c.obj,gpio_intr_service,
libesp_app_format.a,esp_app_desc.c.obj,esp_app_get_elf_sha256,
libesp_hw_support.a,cpu.c.obj,esp_cpu_wait_for_intr,
libesp_hw_support.a,cpu.c.obj,esp_cpu_reset,
libesp_hw_support.a,esp_clk.c.obj,esp_clk_cpu_freq,
libesp_hw_support.a,esp_clk.c.obj,esp_clk_apb_freq,
libesp_hw_support.a,esp_clk.c.obj,esp_clk_xtal_freq,
libesp_hw_support.a,esp_memory_utils.c.obj,esp_ptr_byte_accessible,
libesp_hw_support.a,hw_random.c.obj,esp_random,
libesp_hw_support.a,intr_alloc.c.obj,shared_intr_isr,
libesp_hw_support.a,intr_alloc.c.obj,esp_intr_noniram_disable,
libesp_hw_support.a,intr_alloc.c.obj,esp_intr_noniram_enable,
libesp_hw_support.a,intr_alloc.c.obj,esp_intr_enable,
libesp_hw_support.a,intr_alloc.c.obj,esp_intr_disable,
libesp_hw_support.a,periph_ctrl.c.obj,wifi_bt_common_module_enable,
libesp_hw_support.a,periph_ctrl.c.obj,wifi_bt_common_module_disable,
libesp_hw_support.a,regi2c_ctrl.c.obj,regi2c_ctrl_read_reg,
libesp_hw_support.a,regi2c_ctrl.c.obj,regi2c_ctrl_read_reg_mask,
libesp_hw_support.a,regi2c_ctrl.c.obj,regi2c_ctrl_write_reg,
libesp_hw_support.a,regi2c_ctrl.c.obj,regi2c_ctrl_write_reg_mask,
libesp_hw_support.a,regi2c_ctrl.c.obj,regi2c_enter_critical,
libesp_hw_support.a,regi2c_ctrl.c.obj,regi2c_exit_critical,
libesp_hw_support.a,regi2c_ctrl.c.obj,regi2c_analog_cali_reg_read,
libesp_hw_support.a,regi2c_ctrl.c.obj,regi2c_analog_cali_reg_write,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_32k_enable_external,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_fast_src_set,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_slow_freq_get_hz,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_slow_src_get,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_slow_src_set,
libesp_hw_support.a,rtc_clk.c.obj,rtc_dig_clk8m_disable,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_cpu_freq_set_config_fast,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_8m_enable,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_8md256_enabled,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_bbpll_configure,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_bbpll_enable,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_cpu_freq_get_config,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_cpu_freq_mhz_to_config,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_cpu_freq_set_config,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_cpu_freq_to_8m,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_cpu_freq_to_pll_mhz,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_cpu_freq_set_xtal,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_xtal_freq_get,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_cpu_freq_to_xtal,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_bbpll_disable,
libesp_hw_support.a,rtc_clk.c.obj,rtc_clk_apb_freq_update,
libesp_hw_support.a,rtc_clk.c.obj,clk_ll_rtc_slow_get_src,FALSE
libesp_hw_support.a,rtc_init.c.obj,rtc_vddsdio_set_config,
libesp_hw_support.a,rtc_module.c.obj,rtc_isr,
libesp_hw_support.a,rtc_module.c.obj,rtc_isr_noniram_disable,
libesp_hw_support.a,rtc_module.c.obj,rtc_isr_noniram_enable,
libesp_hw_support.a,rtc_sleep.c.obj,rtc_sleep_pu,
libesp_hw_support.a,rtc_sleep.c.obj,rtc_sleep_finish,
libesp_hw_support.a,rtc_sleep.c.obj,rtc_sleep_get_default_config,
libesp_hw_support.a,rtc_sleep.c.obj,rtc_sleep_init,
libesp_hw_support.a,rtc_sleep.c.obj,rtc_sleep_low_init,
libesp_hw_support.a,rtc_sleep.c.obj,rtc_sleep_start,
libesp_hw_support.a,rtc_time.c.obj,rtc_clk_cal,
libesp_hw_support.a,rtc_time.c.obj,rtc_clk_cal_internal,
libesp_hw_support.a,rtc_time.c.obj,rtc_time_get,
libesp_hw_support.a,rtc_time.c.obj,rtc_time_us_to_slowclk,
libesp_hw_support.a,rtc_time.c.obj,rtc_time_slowclk_to_us,
libesp_hw_support.a,sleep_modes.c.obj,periph_ll_periph_enabled,
libesp_hw_support.a,sleep_modes.c.obj,flush_uarts,
libesp_hw_support.a,sleep_modes.c.obj,suspend_uarts,
libesp_hw_support.a,sleep_modes.c.obj,resume_uarts,
libesp_hw_support.a,sleep_modes.c.obj,esp_sleep_start,
libesp_hw_support.a,sleep_modes.c.obj,esp_deep_sleep_start,
libesp_hw_support.a,sleep_modes.c.obj,esp_light_sleep_inner,
libesp_phy.a,phy_init.c.obj,esp_phy_common_clock_enable,
libesp_phy.a,phy_init.c.obj,esp_phy_common_clock_disable,
libesp_phy.a,phy_init.c.obj,esp_wifi_bt_power_domain_on,
libesp_phy.a,phy_override.c.obj,phy_i2c_enter_critical,
libesp_phy.a,phy_override.c.obj,phy_i2c_exit_critical,
libesp_pm.a,pm_locks.c.obj,esp_pm_lock_acquire,
libesp_pm.a,pm_locks.c.obj,esp_pm_lock_release,
libesp_pm.a,pm_impl.c.obj,get_lowest_allowed_mode,
libesp_pm.a,pm_impl.c.obj,esp_pm_impl_switch_mode,
libesp_pm.a,pm_impl.c.obj,on_freq_update,
libesp_pm.a,pm_impl.c.obj,vApplicationSleep,CONFIG_FREERTOS_USE_TICKLESS_IDLE
libesp_pm.a,pm_impl.c.obj,do_switch,
libesp_ringbuf.a,ringbuf.c.obj,prvCheckItemAvail,
libesp_ringbuf.a,ringbuf.c.obj,prvGetFreeSize,
libesp_ringbuf.a,ringbuf.c.obj,prvReceiveGenericFromISR,
libesp_ringbuf.a,ringbuf.c.obj,xRingbufferGetMaxItemSize,
libesp_rom.a,esp_rom_systimer.c.obj,systimer_hal_init,
libesp_rom.a,esp_rom_systimer.c.obj,systimer_hal_set_alarm_period,
libesp_rom.a,esp_rom_systimer.c.obj,systimer_hal_set_alarm_target,
libesp_rom.a,esp_rom_systimer.c.obj,systimer_hal_set_tick_rate_ops,
libesp_rom.a,esp_rom_uart.c.obj,esp_rom_uart_set_clock_baudrate,
libesp_system.a,brownout.c.obj,rtc_brownout_isr_handler,
libesp_system.a,cache_err_int.c.obj,esp_cache_err_get_cpuid,
libesp_system.a,cpu_start.c.obj,call_start_cpu0,
libesp_system.a,crosscore_int.c.obj,esp_crosscore_int_send,
libesp_system.a,crosscore_int.c.obj,esp_crosscore_int_send_yield,
libesp_system.a,esp_system.c.obj,esp_restart,
libesp_system.a,esp_system.c.obj,esp_system_abort,
libesp_system.a,reset_reason.c.obj,esp_reset_reason_set_hint,
libesp_system.a,reset_reason.c.obj,esp_reset_reason_get_hint,
libesp_system.a,ubsan.c.obj,__ubsan_include,
libesp_timer.a,esp_timer.c.obj,esp_timer_get_next_alarm_for_wake_up,
libesp_timer.a,esp_timer.c.obj,timer_list_unlock,!CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD
libesp_timer.a,esp_timer.c.obj,timer_list_lock,!CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD
libesp_timer.a,esp_timer.c.obj,timer_armed,
libesp_timer.a,esp_timer.c.obj,timer_remove,
libesp_timer.a,esp_timer.c.obj,timer_insert,!CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD
libesp_timer.a,esp_timer.c.obj,esp_timer_start_once,
libesp_timer.a,esp_timer.c.obj,esp_timer_start_periodic,
libesp_timer.a,esp_timer.c.obj,esp_timer_stop,
libesp_timer.a,esp_timer.c.obj,esp_timer_get_expiry_time,
libesp_timer.a,esp_timer_impl_systimer.c.obj,esp_timer_impl_get_time,!CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD
libesp_timer.a,esp_timer_impl_systimer.c.obj,esp_timer_impl_set_alarm_id,!CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD
libesp_timer.a,esp_timer_impl_systimer.c.obj,esp_timer_impl_update_apb_freq,
libesp_timer.a,esp_timer_impl_systimer.c.obj,esp_timer_impl_get_min_period_us,
libesp_timer.a,ets_timer_legacy.c.obj,timer_initialized,
libesp_timer.a,ets_timer_legacy.c.obj,ets_timer_arm_us,
libesp_timer.a,ets_timer_legacy.c.obj,ets_timer_arm,
libesp_timer.a,ets_timer_legacy.c.obj,ets_timer_disarm,
libesp_timer.a,system_time.c.obj,esp_system_get_time,
libesp_wifi.a,esp_adapter.c.obj,semphr_take_from_isr_wrapper,
libesp_wifi.a,esp_adapter.c.obj,wifi_realloc,
libesp_wifi.a,esp_adapter.c.obj,coex_event_duration_get_wrapper,
libesp_wifi.a,esp_adapter.c.obj,coex_schm_interval_set_wrapper,
libesp_wifi.a,esp_adapter.c.obj,esp_empty_wrapper,
libesp_wifi.a,esp_adapter.c.obj,wifi_calloc,
libesp_wifi.a,esp_adapter.c.obj,wifi_zalloc_wrapper,
libesp_wifi.a,esp_adapter.c.obj,env_is_chip_wrapper,
libesp_wifi.a,esp_adapter.c.obj,is_from_isr_wrapper,
libesp_wifi.a,esp_adapter.c.obj,semphr_give_from_isr_wrapper,
libesp_wifi.a,esp_adapter.c.obj,mutex_lock_wrapper,
libesp_wifi.a,esp_adapter.c.obj,mutex_unlock_wrapper,
libesp_wifi.a,esp_adapter.c.obj,task_ms_to_tick_wrapper,
libesp_wifi.a,esp_adapter.c.obj,wifi_apb80m_request_wrapper,
libesp_wifi.a,esp_adapter.c.obj,wifi_apb80m_release_wrapper,
libesp_wifi.a,esp_adapter.c.obj,timer_arm_wrapper,
libesp_wifi.a,esp_adapter.c.obj,wifi_malloc,
libesp_wifi.a,esp_adapter.c.obj,timer_disarm_wrapper,
libesp_wifi.a,esp_adapter.c.obj,timer_arm_us_wrapper,
libesp_wifi.a,esp_adapter.c.obj,wifi_rtc_enable_iso_wrapper,
libesp_wifi.a,esp_adapter.c.obj,wifi_rtc_disable_iso_wrapper,
libesp_wifi.a,esp_adapter.c.obj,malloc_internal_wrapper,
libesp_wifi.a,esp_adapter.c.obj,realloc_internal_wrapper,
libesp_wifi.a,esp_adapter.c.obj,calloc_internal_wrapper,
libesp_wifi.a,esp_adapter.c.obj,zalloc_internal_wrapper,
libesp_wifi.a,esp_adapter.c.obj,coex_status_get_wrapper,
libesp_wifi.a,esp_adapter.c.obj,coex_wifi_release_wrapper,
libfreertos.a,list.c.obj,uxListRemove,FALSE
libfreertos.a,list.c.obj,vListInitialise,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,list.c.obj,vListInitialiseItem,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,list.c.obj,vListInsert,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,list.c.obj,vListInsertEnd,FALSE
libfreertos.a,port.c.obj,vApplicationStackOverflowHook,FALSE
libfreertos.a,port.c.obj,vPortYieldOtherCore,FALSE
libfreertos.a,port.c.obj,vPortYield,
libfreertos.a,port_common.c.obj,xPortcheckValidStackMem,
libfreertos.a,port_common.c.obj,vApplicationGetTimerTaskMemory,
libfreertos.a,port_common.c.obj,esp_startup_start_app_common,
libfreertos.a,port_common.c.obj,xPortCheckValidTCBMem,
libfreertos.a,port_common.c.obj,vApplicationGetIdleTaskMemory,
libfreertos.a,port_systick.c.obj,vPortSetupTimer,
libfreertos.a,port_systick.c.obj,xPortSysTickHandler,FALSE
libfreertos.a,queue.c.obj,prvCopyDataFromQueue,
libfreertos.a,queue.c.obj,prvGetDisinheritPriorityAfterTimeout,
libfreertos.a,queue.c.obj,prvIsQueueEmpty,
libfreertos.a,queue.c.obj,prvNotifyQueueSetContainer,
libfreertos.a,queue.c.obj,xQueueReceive,
libfreertos.a,queue.c.obj,prvUnlockQueue,
libfreertos.a,queue.c.obj,xQueueSemaphoreTake,
libfreertos.a,queue.c.obj,xQueueReceiveFromISR,
libfreertos.a,queue.c.obj,uxQueueMessagesWaitingFromISR,
libfreertos.a,queue.c.obj,xQueueIsQueueEmptyFromISR,
libfreertos.a,queue.c.obj,xQueueGiveFromISR,
libfreertos.a,tasks.c.obj,__getreent,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,pcTaskGetName,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,prvAddCurrentTaskToDelayedList,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,prvDeleteTLS,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,pvTaskIncrementMutexHeldCount,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,taskSelectHighestPriorityTaskSMP,FALSE
libfreertos.a,tasks.c.obj,taskYIELD_OTHER_CORE,FALSE
libfreertos.a,tasks.c.obj,vTaskGetSnapshot,CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH
libfreertos.a,tasks.c.obj,vTaskInternalSetTimeOutState,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,vTaskPlaceOnEventList,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,vTaskPlaceOnEventListRestricted,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,vTaskPlaceOnUnorderedEventList,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,vTaskPriorityDisinheritAfterTimeout,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,vTaskReleaseEventListLock,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,vTaskTakeEventListLock,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,xTaskCheckForTimeOut,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,xTaskGetCurrentTaskHandle,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,xTaskGetSchedulerState,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,xTaskGetTickCount,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,xTaskPriorityDisinherit,FALSE
libfreertos.a,tasks.c.obj,xTaskPriorityInherit,CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
libfreertos.a,tasks.c.obj,prvGetExpectedIdleTime,FALSE
libfreertos.a,tasks.c.obj,vTaskStepTick,FALSE
libhal.a,brownout_hal.c.obj,brownout_hal_intr_clear,
libhal.a,efuse_hal.c.obj,efuse_hal_chip_revision,
libhal.a,efuse_hal.c.obj,efuse_hal_get_major_chip_version,
libhal.a,efuse_hal.c.obj,efuse_hal_get_minor_chip_version,
libheap.a,heap_caps.c.obj,dram_alloc_to_iram_addr,
libheap.a,heap_caps.c.obj,heap_caps_free,
libheap.a,heap_caps.c.obj,heap_caps_realloc_base,
libheap.a,heap_caps.c.obj,heap_caps_realloc,
libheap.a,heap_caps.c.obj,heap_caps_calloc_base,
libheap.a,heap_caps.c.obj,heap_caps_calloc,
libheap.a,heap_caps.c.obj,heap_caps_malloc_base,
libheap.a,heap_caps.c.obj,heap_caps_malloc,
libheap.a,heap_caps.c.obj,heap_caps_malloc_default,
libheap.a,heap_caps.c.obj,heap_caps_realloc_default,
libheap.a,heap_caps.c.obj,find_containing_heap,
libheap.a,multi_heap.c.obj,_multi_heap_lock,
libheap.a,multi_heap.c.obj,multi_heap_in_rom_init,
liblog.a,log_freertos.c.obj,esp_log_timestamp,
liblog.a,log_freertos.c.obj,esp_log_impl_lock,
liblog.a,log_freertos.c.obj,esp_log_impl_unlock,
liblog.a,log_freertos.c.obj,esp_log_impl_lock_timeout,
liblog.a,log_freertos.c.obj,esp_log_early_timestamp,
liblog.a,log.c.obj,esp_log_write,
libmbedcrypto.a,esp_mem.c.obj,esp_mbedtls_mem_calloc,!CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC
libmbedcrypto.a,esp_mem.c.obj,esp_mbedtls_mem_free,!CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC
libnewlib.a,assert.c.obj,__assert_func,
libnewlib.a,assert.c.obj,newlib_include_assert_impl,
libnewlib.a,heap.c.obj,_calloc_r,
libnewlib.a,heap.c.obj,_free_r,
libnewlib.a,heap.c.obj,_malloc_r,
libnewlib.a,heap.c.obj,_realloc_r,
libnewlib.a,heap.c.obj,calloc,
libnewlib.a,heap.c.obj,cfree,
libnewlib.a,heap.c.obj,free,
libnewlib.a,heap.c.obj,malloc,
libnewlib.a,heap.c.obj,newlib_include_heap_impl,
libnewlib.a,heap.c.obj,realloc,
libnewlib.a,locks.c.obj,_lock_try_acquire_recursive,
libnewlib.a,locks.c.obj,lock_release_generic,
libnewlib.a,locks.c.obj,_lock_release,
libnewlib.a,locks.c.obj,_lock_release_recursive,
libnewlib.a,locks.c.obj,__retarget_lock_init,
libnewlib.a,locks.c.obj,__retarget_lock_init_recursive,
libnewlib.a,locks.c.obj,__retarget_lock_close,
libnewlib.a,locks.c.obj,__retarget_lock_close_recursive,
libnewlib.a,locks.c.obj,check_lock_nonzero,
libnewlib.a,locks.c.obj,__retarget_lock_acquire,
libnewlib.a,locks.c.obj,lock_init_generic,
libnewlib.a,locks.c.obj,__retarget_lock_acquire_recursive,
libnewlib.a,locks.c.obj,__retarget_lock_try_acquire,
libnewlib.a,locks.c.obj,__retarget_lock_try_acquire_recursive,
libnewlib.a,locks.c.obj,__retarget_lock_release,
libnewlib.a,locks.c.obj,__retarget_lock_release_recursive,
libnewlib.a,locks.c.obj,_lock_close,
libnewlib.a,locks.c.obj,lock_acquire_generic,
libnewlib.a,locks.c.obj,_lock_acquire,
libnewlib.a,locks.c.obj,_lock_acquire_recursive,
libnewlib.a,locks.c.obj,_lock_try_acquire,
libnewlib.a,reent_init.c.obj,esp_reent_init,
libnewlib.a,time.c.obj,_times_r,
libnewlib.a,time.c.obj,_gettimeofday_r,
libpp.a,pp_debug.o,wifi_gpio_debug,
libpthread.a,pthread.c.obj,pthread_mutex_lock_internal,
libpthread.a,pthread.c.obj,pthread_mutex_lock,
libpthread.a,pthread.c.obj,pthread_mutex_unlock,
libriscv.a,interrupt.c.obj,intr_handler_get,
libriscv.a,interrupt.c.obj,intr_handler_set,
libriscv.a,interrupt.c.obj,intr_matrix_route,
libspi_flash.a,flash_brownout_hook.c.obj,spi_flash_needs_reset_check,FALSE
libspi_flash.a,flash_brownout_hook.c.obj,spi_flash_set_erasing_flag,FALSE
libspi_flash.a,flash_ops.c.obj,spi_flash_guard_set,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,flash_ops.c.obj,spi_flash_malloc_internal,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,flash_ops.c.obj,spi_flash_rom_impl_init,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,flash_ops.c.obj,esp_mspi_pin_init,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,flash_ops.c.obj,spi_flash_init_chip_state,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,spi_flash_os_func_app.c.obj,delay_us,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,spi_flash_os_func_app.c.obj,get_buffer_malloc,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,spi_flash_os_func_app.c.obj,release_buffer_malloc,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,spi_flash_os_func_app.c.obj,main_flash_region_protected,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,spi_flash_os_func_app.c.obj,main_flash_op_status,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,spi_flash_os_func_app.c.obj,spi1_flash_os_check_yield,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,spi_flash_os_func_app.c.obj,spi1_flash_os_yield,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,spi_flash_os_func_noos.c.obj,start,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,spi_flash_os_func_noos.c.obj,end,CONFIG_SPI_FLASH_ROM_IMPL
libspi_flash.a,spi_flash_os_func_noos.c.obj,delay_us,CONFIG_SPI_FLASH_ROM_IMPL
1 library object function option
2 libble_app.a ble_hw.c.o r_ble_hw_resolv_list_get_cur_entry
3 libble_app.a ble_ll_adv.c.o r_ble_ll_adv_set_sched
4 libble_app.a ble_ll_adv.c.o r_ble_ll_adv_sync_pdu_make
5 libble_app.a ble_ll_adv.c.o r_ble_ll_adv_sync_calculate
6 libble_app.a ble_ll_conn.c.o r_ble_ll_conn_is_dev_connected
7 libble_app.a ble_ll_ctrl.c.o r_ble_ll_ctrl_tx_done
8 libble_app.a ble_lll_adv.c.o r_ble_lll_adv_aux_scannable_pdu_payload_len
9 libble_app.a ble_lll_adv.c.o r_ble_lll_adv_halt
10 libble_app.a ble_lll_adv.c.o r_ble_lll_adv_periodic_schedule_next
11 libble_app.a ble_lll_conn.c.o r_ble_lll_conn_cth_flow_free_credit
12 libble_app.a ble_lll_conn.c.o r_ble_lll_conn_update_encryption
13 libble_app.a ble_lll_conn.c.o r_ble_lll_conn_set_slave_flow_control
14 libble_app.a ble_lll_conn.c.o r_ble_lll_init_rx_pkt_isr
15 libble_app.a ble_lll_conn.c.o r_ble_lll_conn_get_rx_mbuf
16 libble_app.a ble_lll_rfmgmt.c.o r_ble_lll_rfmgmt_enable
17 libble_app.a ble_lll_rfmgmt.c.o r_ble_lll_rfmgmt_timer_reschedule
18 libble_app.a ble_lll_rfmgmt.c.o r_ble_lll_rfmgmt_timer_exp
19 libble_app.a ble_lll_scan.c.o r_ble_lll_scan_targeta_is_matched
20 libble_app.a ble_lll_scan.c.o r_ble_lll_scan_rx_isr_on_legacy
21 libble_app.a ble_lll_scan.c.o r_ble_lll_scan_rx_isr_on_aux
22 libble_app.a ble_lll_scan.c.o r_ble_lll_scan_process_rsp_in_isr
23 libble_app.a ble_lll_scan.c.o r_ble_lll_scan_rx_pkt_isr
24 libble_app.a ble_lll_sched.c.o r_ble_lll_sched_execute_check
25 libble_app.a ble_lll_sync.c.o r_ble_lll_sync_event_start_cb
26 libble_app.a ble_phy.c.o r_ble_phy_set_rxhdr
27 libble_app.a ble_phy.c.o r_ble_phy_update_conn_sequence
28 libble_app.a ble_phy.c.o r_ble_phy_set_sequence_mode
29 libble_app.a ble_phy.c.o r_ble_phy_txpower_round
30 libble_app.a os_mempool.c.obj r_os_memblock_put
31 libbootloader_support.a bootloader_flash.c.obj bootloader_read_flash_id
32 libbootloader_support.a flash_encrypt.c.obj esp_flash_encryption_enabled
33 libbt.a bt_osi_mem.c.obj bt_osi_mem_calloc CONFIG_BT_ENABLED
34 libbt.a bt_osi_mem.c.obj bt_osi_mem_malloc CONFIG_BT_ENABLED
35 libbt.a bt_osi_mem.c.obj bt_osi_mem_malloc_internal CONFIG_BT_ENABLED
36 libbt.a bt_osi_mem.c.obj bt_osi_mem_free CONFIG_BT_ENABLED
37 libbt.a bt.c.obj esp_reset_rpa_moudle CONFIG_BT_ENABLED
38 libbt.a bt.c.obj osi_assert_wrapper CONFIG_BT_ENABLED
39 libbt.a bt.c.obj osi_random_wrapper CONFIG_BT_ENABLED
40 libbt.a nimble_port.c.obj nimble_port_run CONFIG_BT_NIMBLE_ENABLED
41 libbt.a nimble_port.c.obj nimble_port_get_dflt_eventq CONFIG_BT_NIMBLE_ENABLED
42 libbt.a npl_os_freertos.c.obj os_callout_timer_cb CONFIG_BT_ENABLED && !CONFIG_BT_NIMBLE_USE_ESP_TIMER
43 libbt.a npl_os_freertos.c.obj npl_freertos_event_run CONFIG_BT_ENABLED
44 libbt.a npl_os_freertos.c.obj npl_freertos_callout_stop CONFIG_BT_ENABLED
45 libbt.a npl_os_freertos.c.obj npl_freertos_time_get CONFIG_BT_ENABLED
46 libbt.a npl_os_freertos.c.obj npl_freertos_callout_reset CONFIG_BT_ENABLED
47 libbt.a npl_os_freertos.c.obj npl_freertos_callout_is_active CONFIG_BT_ENABLED
48 libbt.a npl_os_freertos.c.obj npl_freertos_callout_get_ticks CONFIG_BT_ENABLED
49 libbt.a npl_os_freertos.c.obj npl_freertos_callout_remaining_ticks CONFIG_BT_ENABLED
50 libbt.a npl_os_freertos.c.obj npl_freertos_time_delay CONFIG_BT_ENABLED
51 libbt.a npl_os_freertos.c.obj npl_freertos_eventq_is_empty CONFIG_BT_ENABLED
52 libbt.a npl_os_freertos.c.obj npl_freertos_mutex_pend CONFIG_BT_ENABLED
53 libbt.a npl_os_freertos.c.obj npl_freertos_mutex_release CONFIG_BT_ENABLED
54 libbt.a npl_os_freertos.c.obj npl_freertos_sem_init CONFIG_BT_ENABLED
55 libbt.a npl_os_freertos.c.obj npl_freertos_sem_pend CONFIG_BT_ENABLED
56 libbt.a npl_os_freertos.c.obj npl_freertos_sem_release CONFIG_BT_ENABLED
57 libbt.a npl_os_freertos.c.obj npl_freertos_callout_init CONFIG_BT_ENABLED
58 libbt.a npl_os_freertos.c.obj npl_freertos_callout_deinit CONFIG_BT_ENABLED
59 libbt.a npl_os_freertos.c.obj npl_freertos_event_is_queued CONFIG_BT_ENABLED
60 libbt.a npl_os_freertos.c.obj npl_freertos_event_get_arg CONFIG_BT_ENABLED
61 libbt.a npl_os_freertos.c.obj npl_freertos_time_ms_to_ticks32 CONFIG_BT_ENABLED
62 libbt.a npl_os_freertos.c.obj npl_freertos_time_ticks_to_ms32 CONFIG_BT_ENABLED
63 libbt.a npl_os_freertos.c.obj npl_freertos_hw_is_in_critical CONFIG_BT_ENABLED
64 libbt.a npl_os_freertos.c.obj npl_freertos_get_time_forever CONFIG_BT_ENABLED
65 libbt.a npl_os_freertos.c.obj npl_freertos_os_started CONFIG_BT_ENABLED
66 libbt.a npl_os_freertos.c.obj npl_freertos_get_current_task_id CONFIG_BT_ENABLED
67 libbt.a npl_os_freertos.c.obj npl_freertos_event_reset CONFIG_BT_ENABLED
68 libbt.a npl_os_freertos.c.obj npl_freertos_callout_mem_reset CONFIG_BT_ENABLED
69 libbt.a npl_os_freertos.c.obj npl_freertos_event_init CONFIG_BT_ENABLED
70 libbt.a npl_os_freertos.c.obj npl_freertos_sem_get_count CONFIG_BT_ENABLED
71 libbt.a npl_os_freertos.c.obj npl_freertos_eventq_remove CONFIG_BT_ENABLED
72 libbt.a npl_os_freertos.c.obj npl_freertos_hw_exit_critical CONFIG_BT_ENABLED
73 libbt.a npl_os_freertos.c.obj npl_freertos_mutex_init CONFIG_BT_ENABLED
74 libbt.a npl_os_freertos.c.obj npl_freertos_hw_enter_critical CONFIG_BT_ENABLED
75 libbt.a npl_os_freertos.c.obj npl_freertos_eventq_put CONFIG_BT_ENABLED
76 libbt.a npl_os_freertos.c.obj npl_freertos_eventq_get CONFIG_BT_ENABLED
77 libbt.a npl_os_freertos.c.obj npl_freertos_sem_deinit CONFIG_BT_ENABLED
78 libbt.a npl_os_freertos.c.obj npl_freertos_mutex_deinit CONFIG_BT_ENABLED
79 libbt.a npl_os_freertos.c.obj npl_freertos_eventq_deinit CONFIG_BT_ENABLED
80 libbt.a npl_os_freertos.c.obj npl_freertos_eventq_init CONFIG_BT_ENABLED
81 libbt.a npl_os_freertos.c.obj npl_freertos_event_deinit CONFIG_BT_ENABLED
82 libbt.a npl_os_freertos.c.obj npl_freertos_time_ticks_to_ms CONFIG_BT_ENABLED
83 libbt.a npl_os_freertos.c.obj npl_freertos_time_ms_to_ticks CONFIG_BT_ENABLED
84 libbt.a npl_os_freertos.c.obj npl_freertos_callout_set_arg CONFIG_BT_ENABLED
85 libbt.a npl_os_freertos.c.obj npl_freertos_event_set_arg CONFIG_BT_ENABLED
86 libbt.a npl_os_freertos.c.obj npl_freertos_eventq_put CONFIG_BT_ENABLED
87 libdriver.a gpio.c.obj gpio_intr_service
88 libesp_app_format.a esp_app_desc.c.obj esp_app_get_elf_sha256
89 libesp_hw_support.a cpu.c.obj esp_cpu_wait_for_intr
90 libesp_hw_support.a cpu.c.obj esp_cpu_reset
91 libesp_hw_support.a esp_clk.c.obj esp_clk_cpu_freq
92 libesp_hw_support.a esp_clk.c.obj esp_clk_apb_freq
93 libesp_hw_support.a esp_clk.c.obj esp_clk_xtal_freq
94 libesp_hw_support.a esp_memory_utils.c.obj esp_ptr_byte_accessible
95 libesp_hw_support.a hw_random.c.obj esp_random
96 libesp_hw_support.a intr_alloc.c.obj shared_intr_isr
97 libesp_hw_support.a intr_alloc.c.obj esp_intr_noniram_disable
98 libesp_hw_support.a intr_alloc.c.obj esp_intr_noniram_enable
99 libesp_hw_support.a intr_alloc.c.obj esp_intr_enable
100 libesp_hw_support.a intr_alloc.c.obj esp_intr_disable
101 libesp_hw_support.a periph_ctrl.c.obj wifi_bt_common_module_enable
102 libesp_hw_support.a periph_ctrl.c.obj wifi_bt_common_module_disable
103 libesp_hw_support.a regi2c_ctrl.c.obj regi2c_ctrl_read_reg
104 libesp_hw_support.a regi2c_ctrl.c.obj regi2c_ctrl_read_reg_mask
105 libesp_hw_support.a regi2c_ctrl.c.obj regi2c_ctrl_write_reg
106 libesp_hw_support.a regi2c_ctrl.c.obj regi2c_ctrl_write_reg_mask
107 libesp_hw_support.a regi2c_ctrl.c.obj regi2c_enter_critical
108 libesp_hw_support.a regi2c_ctrl.c.obj regi2c_exit_critical
109 libesp_hw_support.a regi2c_ctrl.c.obj regi2c_analog_cali_reg_read
110 libesp_hw_support.a regi2c_ctrl.c.obj regi2c_analog_cali_reg_write
111 libesp_hw_support.a rtc_clk.c.obj rtc_clk_32k_enable_external
112 libesp_hw_support.a rtc_clk.c.obj rtc_clk_fast_src_set
113 libesp_hw_support.a rtc_clk.c.obj rtc_clk_slow_freq_get_hz
114 libesp_hw_support.a rtc_clk.c.obj rtc_clk_slow_src_get
115 libesp_hw_support.a rtc_clk.c.obj rtc_clk_slow_src_set
116 libesp_hw_support.a rtc_clk.c.obj rtc_dig_clk8m_disable
117 libesp_hw_support.a rtc_clk.c.obj rtc_clk_cpu_freq_set_config_fast
118 libesp_hw_support.a rtc_clk.c.obj rtc_clk_8m_enable
119 libesp_hw_support.a rtc_clk.c.obj rtc_clk_8md256_enabled
120 libesp_hw_support.a rtc_clk.c.obj rtc_clk_bbpll_configure
121 libesp_hw_support.a rtc_clk.c.obj rtc_clk_bbpll_enable
122 libesp_hw_support.a rtc_clk.c.obj rtc_clk_cpu_freq_get_config
123 libesp_hw_support.a rtc_clk.c.obj rtc_clk_cpu_freq_mhz_to_config
124 libesp_hw_support.a rtc_clk.c.obj rtc_clk_cpu_freq_set_config
125 libesp_hw_support.a rtc_clk.c.obj rtc_clk_cpu_freq_to_8m
126 libesp_hw_support.a rtc_clk.c.obj rtc_clk_cpu_freq_to_pll_mhz
127 libesp_hw_support.a rtc_clk.c.obj rtc_clk_cpu_freq_set_xtal
128 libesp_hw_support.a rtc_clk.c.obj rtc_clk_xtal_freq_get
129 libesp_hw_support.a rtc_clk.c.obj rtc_clk_cpu_freq_to_xtal
130 libesp_hw_support.a rtc_clk.c.obj rtc_clk_bbpll_disable
131 libesp_hw_support.a rtc_clk.c.obj rtc_clk_apb_freq_update
132 libesp_hw_support.a rtc_clk.c.obj clk_ll_rtc_slow_get_src FALSE
133 libesp_hw_support.a rtc_init.c.obj rtc_vddsdio_set_config
134 libesp_hw_support.a rtc_module.c.obj rtc_isr
135 libesp_hw_support.a rtc_module.c.obj rtc_isr_noniram_disable
136 libesp_hw_support.a rtc_module.c.obj rtc_isr_noniram_enable
137 libesp_hw_support.a rtc_sleep.c.obj rtc_sleep_pu
138 libesp_hw_support.a rtc_sleep.c.obj rtc_sleep_finish
139 libesp_hw_support.a rtc_sleep.c.obj rtc_sleep_get_default_config
140 libesp_hw_support.a rtc_sleep.c.obj rtc_sleep_init
141 libesp_hw_support.a rtc_sleep.c.obj rtc_sleep_low_init
142 libesp_hw_support.a rtc_sleep.c.obj rtc_sleep_start
143 libesp_hw_support.a rtc_time.c.obj rtc_clk_cal
144 libesp_hw_support.a rtc_time.c.obj rtc_clk_cal_internal
145 libesp_hw_support.a rtc_time.c.obj rtc_time_get
146 libesp_hw_support.a rtc_time.c.obj rtc_time_us_to_slowclk
147 libesp_hw_support.a rtc_time.c.obj rtc_time_slowclk_to_us
148 libesp_hw_support.a sleep_modes.c.obj periph_ll_periph_enabled
149 libesp_hw_support.a sleep_modes.c.obj flush_uarts
150 libesp_hw_support.a sleep_modes.c.obj suspend_uarts
151 libesp_hw_support.a sleep_modes.c.obj resume_uarts
152 libesp_hw_support.a sleep_modes.c.obj esp_sleep_start
153 libesp_hw_support.a sleep_modes.c.obj esp_deep_sleep_start
154 libesp_hw_support.a sleep_modes.c.obj esp_light_sleep_inner
155 libesp_phy.a phy_init.c.obj esp_phy_common_clock_enable
156 libesp_phy.a phy_init.c.obj esp_phy_common_clock_disable
157 libesp_phy.a phy_init.c.obj esp_wifi_bt_power_domain_on
158 libesp_phy.a phy_override.c.obj phy_i2c_enter_critical
159 libesp_phy.a phy_override.c.obj phy_i2c_exit_critical
160 libesp_pm.a pm_locks.c.obj esp_pm_lock_acquire
161 libesp_pm.a pm_locks.c.obj esp_pm_lock_release
162 libesp_pm.a pm_impl.c.obj get_lowest_allowed_mode
163 libesp_pm.a pm_impl.c.obj esp_pm_impl_switch_mode
164 libesp_pm.a pm_impl.c.obj on_freq_update
165 libesp_pm.a pm_impl.c.obj vApplicationSleep CONFIG_FREERTOS_USE_TICKLESS_IDLE
166 libesp_pm.a pm_impl.c.obj do_switch
167 libesp_ringbuf.a ringbuf.c.obj prvCheckItemAvail
168 libesp_ringbuf.a ringbuf.c.obj prvGetFreeSize
169 libesp_ringbuf.a ringbuf.c.obj prvReceiveGenericFromISR
170 libesp_ringbuf.a ringbuf.c.obj xRingbufferGetMaxItemSize
171 libesp_rom.a esp_rom_systimer.c.obj systimer_hal_init
172 libesp_rom.a esp_rom_systimer.c.obj systimer_hal_set_alarm_period
173 libesp_rom.a esp_rom_systimer.c.obj systimer_hal_set_alarm_target
174 libesp_rom.a esp_rom_systimer.c.obj systimer_hal_set_tick_rate_ops
175 libesp_rom.a esp_rom_uart.c.obj esp_rom_uart_set_clock_baudrate
176 libesp_system.a brownout.c.obj rtc_brownout_isr_handler
177 libesp_system.a cache_err_int.c.obj esp_cache_err_get_cpuid
178 libesp_system.a cpu_start.c.obj call_start_cpu0
179 libesp_system.a crosscore_int.c.obj esp_crosscore_int_send
180 libesp_system.a crosscore_int.c.obj esp_crosscore_int_send_yield
181 libesp_system.a esp_system.c.obj esp_restart
182 libesp_system.a esp_system.c.obj esp_system_abort
183 libesp_system.a reset_reason.c.obj esp_reset_reason_set_hint
184 libesp_system.a reset_reason.c.obj esp_reset_reason_get_hint
185 libesp_system.a ubsan.c.obj __ubsan_include
186 libesp_timer.a esp_timer.c.obj esp_timer_get_next_alarm_for_wake_up
187 libesp_timer.a esp_timer.c.obj timer_list_unlock !CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD
188 libesp_timer.a esp_timer.c.obj timer_list_lock !CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD
189 libesp_timer.a esp_timer.c.obj timer_armed
190 libesp_timer.a esp_timer.c.obj timer_remove
191 libesp_timer.a esp_timer.c.obj timer_insert !CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD
192 libesp_timer.a esp_timer.c.obj esp_timer_start_once
193 libesp_timer.a esp_timer.c.obj esp_timer_start_periodic
194 libesp_timer.a esp_timer.c.obj esp_timer_stop
195 libesp_timer.a esp_timer.c.obj esp_timer_get_expiry_time
196 libesp_timer.a esp_timer_impl_systimer.c.obj esp_timer_impl_get_time !CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD
197 libesp_timer.a esp_timer_impl_systimer.c.obj esp_timer_impl_set_alarm_id !CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD
198 libesp_timer.a esp_timer_impl_systimer.c.obj esp_timer_impl_update_apb_freq
199 libesp_timer.a esp_timer_impl_systimer.c.obj esp_timer_impl_get_min_period_us
200 libesp_timer.a ets_timer_legacy.c.obj timer_initialized
201 libesp_timer.a ets_timer_legacy.c.obj ets_timer_arm_us
202 libesp_timer.a ets_timer_legacy.c.obj ets_timer_arm
203 libesp_timer.a ets_timer_legacy.c.obj ets_timer_disarm
204 libesp_timer.a system_time.c.obj esp_system_get_time
205 libesp_wifi.a esp_adapter.c.obj semphr_take_from_isr_wrapper
206 libesp_wifi.a esp_adapter.c.obj wifi_realloc
207 libesp_wifi.a esp_adapter.c.obj coex_event_duration_get_wrapper
208 libesp_wifi.a esp_adapter.c.obj coex_schm_interval_set_wrapper
209 libesp_wifi.a esp_adapter.c.obj esp_empty_wrapper
210 libesp_wifi.a esp_adapter.c.obj wifi_calloc
211 libesp_wifi.a esp_adapter.c.obj wifi_zalloc_wrapper
212 libesp_wifi.a esp_adapter.c.obj env_is_chip_wrapper
213 libesp_wifi.a esp_adapter.c.obj is_from_isr_wrapper
214 libesp_wifi.a esp_adapter.c.obj semphr_give_from_isr_wrapper
215 libesp_wifi.a esp_adapter.c.obj mutex_lock_wrapper
216 libesp_wifi.a esp_adapter.c.obj mutex_unlock_wrapper
217 libesp_wifi.a esp_adapter.c.obj task_ms_to_tick_wrapper
218 libesp_wifi.a esp_adapter.c.obj wifi_apb80m_request_wrapper
219 libesp_wifi.a esp_adapter.c.obj wifi_apb80m_release_wrapper
220 libesp_wifi.a esp_adapter.c.obj timer_arm_wrapper
221 libesp_wifi.a esp_adapter.c.obj wifi_malloc
222 libesp_wifi.a esp_adapter.c.obj timer_disarm_wrapper
223 libesp_wifi.a esp_adapter.c.obj timer_arm_us_wrapper
224 libesp_wifi.a esp_adapter.c.obj wifi_rtc_enable_iso_wrapper
225 libesp_wifi.a esp_adapter.c.obj wifi_rtc_disable_iso_wrapper
226 libesp_wifi.a esp_adapter.c.obj malloc_internal_wrapper
227 libesp_wifi.a esp_adapter.c.obj realloc_internal_wrapper
228 libesp_wifi.a esp_adapter.c.obj calloc_internal_wrapper
229 libesp_wifi.a esp_adapter.c.obj zalloc_internal_wrapper
230 libesp_wifi.a esp_adapter.c.obj coex_status_get_wrapper
231 libesp_wifi.a esp_adapter.c.obj coex_wifi_release_wrapper
232 libfreertos.a list.c.obj uxListRemove FALSE
233 libfreertos.a list.c.obj vListInitialise CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
234 libfreertos.a list.c.obj vListInitialiseItem CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
235 libfreertos.a list.c.obj vListInsert CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
236 libfreertos.a list.c.obj vListInsertEnd FALSE
237 libfreertos.a port.c.obj vApplicationStackOverflowHook FALSE
238 libfreertos.a port.c.obj vPortYieldOtherCore FALSE
239 libfreertos.a port.c.obj vPortYield
240 libfreertos.a port_common.c.obj xPortcheckValidStackMem
241 libfreertos.a port_common.c.obj vApplicationGetTimerTaskMemory
242 libfreertos.a port_common.c.obj esp_startup_start_app_common
243 libfreertos.a port_common.c.obj xPortCheckValidTCBMem
244 libfreertos.a port_common.c.obj vApplicationGetIdleTaskMemory
245 libfreertos.a port_systick.c.obj vPortSetupTimer
246 libfreertos.a port_systick.c.obj xPortSysTickHandler FALSE
247 libfreertos.a queue.c.obj prvCopyDataFromQueue
248 libfreertos.a queue.c.obj prvGetDisinheritPriorityAfterTimeout
249 libfreertos.a queue.c.obj prvIsQueueEmpty
250 libfreertos.a queue.c.obj prvNotifyQueueSetContainer
251 libfreertos.a queue.c.obj xQueueReceive
252 libfreertos.a queue.c.obj prvUnlockQueue
253 libfreertos.a queue.c.obj xQueueSemaphoreTake
254 libfreertos.a queue.c.obj xQueueReceiveFromISR
255 libfreertos.a queue.c.obj uxQueueMessagesWaitingFromISR
256 libfreertos.a queue.c.obj xQueueIsQueueEmptyFromISR
257 libfreertos.a queue.c.obj xQueueGiveFromISR
258 libfreertos.a tasks.c.obj __getreent CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
259 libfreertos.a tasks.c.obj pcTaskGetName CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
260 libfreertos.a tasks.c.obj prvAddCurrentTaskToDelayedList CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
261 libfreertos.a tasks.c.obj prvDeleteTLS CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
262 libfreertos.a tasks.c.obj pvTaskIncrementMutexHeldCount CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
263 libfreertos.a tasks.c.obj taskSelectHighestPriorityTaskSMP FALSE
264 libfreertos.a tasks.c.obj taskYIELD_OTHER_CORE FALSE
265 libfreertos.a tasks.c.obj vTaskGetSnapshot CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH
266 libfreertos.a tasks.c.obj vTaskInternalSetTimeOutState CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
267 libfreertos.a tasks.c.obj vTaskPlaceOnEventList CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
268 libfreertos.a tasks.c.obj vTaskPlaceOnEventListRestricted CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
269 libfreertos.a tasks.c.obj vTaskPlaceOnUnorderedEventList CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
270 libfreertos.a tasks.c.obj vTaskPriorityDisinheritAfterTimeout CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
271 libfreertos.a tasks.c.obj vTaskReleaseEventListLock CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
272 libfreertos.a tasks.c.obj vTaskTakeEventListLock CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
273 libfreertos.a tasks.c.obj xTaskCheckForTimeOut CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
274 libfreertos.a tasks.c.obj xTaskGetCurrentTaskHandle CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
275 libfreertos.a tasks.c.obj xTaskGetSchedulerState CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
276 libfreertos.a tasks.c.obj xTaskGetTickCount CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
277 libfreertos.a tasks.c.obj xTaskPriorityDisinherit FALSE
278 libfreertos.a tasks.c.obj xTaskPriorityInherit CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
279 libfreertos.a tasks.c.obj prvGetExpectedIdleTime FALSE
280 libfreertos.a tasks.c.obj vTaskStepTick FALSE
281 libhal.a brownout_hal.c.obj brownout_hal_intr_clear
282 libhal.a efuse_hal.c.obj efuse_hal_chip_revision
283 libhal.a efuse_hal.c.obj efuse_hal_get_major_chip_version
284 libhal.a efuse_hal.c.obj efuse_hal_get_minor_chip_version
285 libheap.a heap_caps.c.obj dram_alloc_to_iram_addr
286 libheap.a heap_caps.c.obj heap_caps_free
287 libheap.a heap_caps.c.obj heap_caps_realloc_base
288 libheap.a heap_caps.c.obj heap_caps_realloc
289 libheap.a heap_caps.c.obj heap_caps_calloc_base
290 libheap.a heap_caps.c.obj heap_caps_calloc
291 libheap.a heap_caps.c.obj heap_caps_malloc_base
292 libheap.a heap_caps.c.obj heap_caps_malloc
293 libheap.a heap_caps.c.obj heap_caps_malloc_default
294 libheap.a heap_caps.c.obj heap_caps_realloc_default
295 libheap.a heap_caps.c.obj find_containing_heap
296 libheap.a multi_heap.c.obj _multi_heap_lock
297 libheap.a multi_heap.c.obj multi_heap_in_rom_init
298 liblog.a log_freertos.c.obj esp_log_timestamp
299 liblog.a log_freertos.c.obj esp_log_impl_lock
300 liblog.a log_freertos.c.obj esp_log_impl_unlock
301 liblog.a log_freertos.c.obj esp_log_impl_lock_timeout
302 liblog.a log_freertos.c.obj esp_log_early_timestamp
303 liblog.a log.c.obj esp_log_write
304 libmbedcrypto.a esp_mem.c.obj esp_mbedtls_mem_calloc !CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC
305 libmbedcrypto.a esp_mem.c.obj esp_mbedtls_mem_free !CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC
306 libnewlib.a assert.c.obj __assert_func
307 libnewlib.a assert.c.obj newlib_include_assert_impl
308 libnewlib.a heap.c.obj _calloc_r
309 libnewlib.a heap.c.obj _free_r
310 libnewlib.a heap.c.obj _malloc_r
311 libnewlib.a heap.c.obj _realloc_r
312 libnewlib.a heap.c.obj calloc
313 libnewlib.a heap.c.obj cfree
314 libnewlib.a heap.c.obj free
315 libnewlib.a heap.c.obj malloc
316 libnewlib.a heap.c.obj newlib_include_heap_impl
317 libnewlib.a heap.c.obj realloc
318 libnewlib.a locks.c.obj _lock_try_acquire_recursive
319 libnewlib.a locks.c.obj lock_release_generic
320 libnewlib.a locks.c.obj _lock_release
321 libnewlib.a locks.c.obj _lock_release_recursive
322 libnewlib.a locks.c.obj __retarget_lock_init
323 libnewlib.a locks.c.obj __retarget_lock_init_recursive
324 libnewlib.a locks.c.obj __retarget_lock_close
325 libnewlib.a locks.c.obj __retarget_lock_close_recursive
326 libnewlib.a locks.c.obj check_lock_nonzero
327 libnewlib.a locks.c.obj __retarget_lock_acquire
328 libnewlib.a locks.c.obj lock_init_generic
329 libnewlib.a locks.c.obj __retarget_lock_acquire_recursive
330 libnewlib.a locks.c.obj __retarget_lock_try_acquire
331 libnewlib.a locks.c.obj __retarget_lock_try_acquire_recursive
332 libnewlib.a locks.c.obj __retarget_lock_release
333 libnewlib.a locks.c.obj __retarget_lock_release_recursive
334 libnewlib.a locks.c.obj _lock_close
335 libnewlib.a locks.c.obj lock_acquire_generic
336 libnewlib.a locks.c.obj _lock_acquire
337 libnewlib.a locks.c.obj _lock_acquire_recursive
338 libnewlib.a locks.c.obj _lock_try_acquire
339 libnewlib.a reent_init.c.obj esp_reent_init
340 libnewlib.a time.c.obj _times_r
341 libnewlib.a time.c.obj _gettimeofday_r
342 libpp.a pp_debug.o wifi_gpio_debug
343 libpthread.a pthread.c.obj pthread_mutex_lock_internal
344 libpthread.a pthread.c.obj pthread_mutex_lock
345 libpthread.a pthread.c.obj pthread_mutex_unlock
346 libriscv.a interrupt.c.obj intr_handler_get
347 libriscv.a interrupt.c.obj intr_handler_set
348 libriscv.a interrupt.c.obj intr_matrix_route
349 libspi_flash.a flash_brownout_hook.c.obj spi_flash_needs_reset_check FALSE
350 libspi_flash.a flash_brownout_hook.c.obj spi_flash_set_erasing_flag FALSE
351 libspi_flash.a flash_ops.c.obj spi_flash_guard_set CONFIG_SPI_FLASH_ROM_IMPL
352 libspi_flash.a flash_ops.c.obj spi_flash_malloc_internal CONFIG_SPI_FLASH_ROM_IMPL
353 libspi_flash.a flash_ops.c.obj spi_flash_rom_impl_init CONFIG_SPI_FLASH_ROM_IMPL
354 libspi_flash.a flash_ops.c.obj esp_mspi_pin_init CONFIG_SPI_FLASH_ROM_IMPL
355 libspi_flash.a flash_ops.c.obj spi_flash_init_chip_state CONFIG_SPI_FLASH_ROM_IMPL
356 libspi_flash.a spi_flash_os_func_app.c.obj delay_us CONFIG_SPI_FLASH_ROM_IMPL
357 libspi_flash.a spi_flash_os_func_app.c.obj get_buffer_malloc CONFIG_SPI_FLASH_ROM_IMPL
358 libspi_flash.a spi_flash_os_func_app.c.obj release_buffer_malloc CONFIG_SPI_FLASH_ROM_IMPL
359 libspi_flash.a spi_flash_os_func_app.c.obj main_flash_region_protected CONFIG_SPI_FLASH_ROM_IMPL
360 libspi_flash.a spi_flash_os_func_app.c.obj main_flash_op_status CONFIG_SPI_FLASH_ROM_IMPL
361 libspi_flash.a spi_flash_os_func_app.c.obj spi1_flash_os_check_yield CONFIG_SPI_FLASH_ROM_IMPL
362 libspi_flash.a spi_flash_os_func_app.c.obj spi1_flash_os_yield CONFIG_SPI_FLASH_ROM_IMPL
363 libspi_flash.a spi_flash_os_func_noos.c.obj start CONFIG_SPI_FLASH_ROM_IMPL
364 libspi_flash.a spi_flash_os_func_noos.c.obj end CONFIG_SPI_FLASH_ROM_IMPL
365 libspi_flash.a spi_flash_os_func_noos.c.obj delay_us CONFIG_SPI_FLASH_ROM_IMPL

View File

@ -0,0 +1,24 @@
library,path
libble_app.a,$IDF_PATH/components/bt/controller/lib_esp32c2/esp32c2-bt-lib/libble_app.a
libpp.a,$IDF_PATH/components/esp_wifi/lib/esp32c2/libpp.a
libbootloader_support.a,./esp-idf/bootloader_support/libbootloader_support.a
libbt.a,./esp-idf/bt/libbt.a
libdriver.a,./esp-idf/driver/libdriver.a
libesp_app_format.a,./esp-idf/esp_app_format/libesp_app_format.a
libesp_hw_support.a,./esp-idf/esp_hw_support/libesp_hw_support.a
libesp_phy.a,./esp-idf/esp_phy/libesp_phy.a
libesp_pm.a,./esp-idf/esp_pm/libesp_pm.a
libesp_ringbuf.a,./esp-idf/esp_ringbuf/libesp_ringbuf.a
libesp_rom.a,./esp-idf/esp_rom/libesp_rom.a
libesp_system.a,./esp-idf/esp_system/libesp_system.a
libesp_timer.a,./esp-idf/esp_timer/libesp_timer.a
libesp_wifi.a,./esp-idf/esp_wifi/libesp_wifi.a
libfreertos.a,./esp-idf/freertos/libfreertos.a
libhal.a,./esp-idf/hal/libhal.a
libheap.a,./esp-idf/heap/libheap.a
liblog.a,./esp-idf/log/liblog.a
libmbedcrypto.a,./esp-idf/mbedtls/mbedtls/library/libmbedcrypto.a
libnewlib.a,./esp-idf/newlib/libnewlib.a
libpthread.a,./esp-idf/pthread/libpthread.a
libriscv.a,./esp-idf/riscv/libriscv.a
libspi_flash.a,./esp-idf/spi_flash/libspi_flash.a
1 library path
2 libble_app.a $IDF_PATH/components/bt/controller/lib_esp32c2/esp32c2-bt-lib/libble_app.a
3 libpp.a $IDF_PATH/components/esp_wifi/lib/esp32c2/libpp.a
4 libbootloader_support.a ./esp-idf/bootloader_support/libbootloader_support.a
5 libbt.a ./esp-idf/bt/libbt.a
6 libdriver.a ./esp-idf/driver/libdriver.a
7 libesp_app_format.a ./esp-idf/esp_app_format/libesp_app_format.a
8 libesp_hw_support.a ./esp-idf/esp_hw_support/libesp_hw_support.a
9 libesp_phy.a ./esp-idf/esp_phy/libesp_phy.a
10 libesp_pm.a ./esp-idf/esp_pm/libesp_pm.a
11 libesp_ringbuf.a ./esp-idf/esp_ringbuf/libesp_ringbuf.a
12 libesp_rom.a ./esp-idf/esp_rom/libesp_rom.a
13 libesp_system.a ./esp-idf/esp_system/libesp_system.a
14 libesp_timer.a ./esp-idf/esp_timer/libesp_timer.a
15 libesp_wifi.a ./esp-idf/esp_wifi/libesp_wifi.a
16 libfreertos.a ./esp-idf/freertos/libfreertos.a
17 libhal.a ./esp-idf/hal/libhal.a
18 libheap.a ./esp-idf/heap/libheap.a
19 liblog.a ./esp-idf/log/liblog.a
20 libmbedcrypto.a ./esp-idf/mbedtls/mbedtls/library/libmbedcrypto.a
21 libnewlib.a ./esp-idf/newlib/libnewlib.a
22 libpthread.a ./esp-idf/pthread/libpthread.a
23 libriscv.a ./esp-idf/riscv/libriscv.a
24 libspi_flash.a ./esp-idf/spi_flash/libspi_flash.a

View File

@ -0,0 +1,66 @@
library,object,path
libbootloader_support.a,bootloader_flash.c.obj,esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/bootloader_flash/src/bootloader_flash.c.obj
libbootloader_support.a,flash_encrypt.c.obj,esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/flash_encrypt.c.obj
libbt.a,bt_osi_mem.c.obj,esp-idf/bt/CMakeFiles/__idf_bt.dir/porting/mem/bt_osi_mem.c.obj
libbt.a,bt.c.obj,esp-idf/bt/CMakeFiles/__idf_bt.dir/controller/esp32c2/bt.c.obj
libbt.a,npl_os_freertos.c.obj,esp-idf/bt/CMakeFiles/__idf_bt.dir/porting/npl/freertos/src/npl_os_freertos.c.obj
libbt.a,nimble_port.c.obj,esp-idf/bt/CMakeFiles/__idf_bt.dir/host/nimble/nimble/porting/nimble/src/nimble_port.c.obj
libdriver.a,gpio.c.obj,esp-idf/driver/CMakeFiles/__idf_driver.dir/gpio/gpio.c.obj
libesp_app_format.a,esp_app_desc.c.obj,esp-idf/esp_app_format/CMakeFiles/__idf_esp_app_format.dir/esp_app_desc.c.obj
libesp_hw_support.a,cpu.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/cpu.c.obj
libesp_hw_support.a,esp_clk.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/esp_clk.c.obj
libesp_hw_support.a,esp_memory_utils.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/esp_memory_utils.c.obj
libesp_hw_support.a,hw_random.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/hw_random.c.obj
libesp_hw_support.a,intr_alloc.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/intr_alloc.c.obj
libesp_hw_support.a,periph_ctrl.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/periph_ctrl.c.obj
libesp_hw_support.a,regi2c_ctrl.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/regi2c_ctrl.c.obj
libesp_hw_support.a,rtc_clk.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32c2/rtc_clk.c.obj
libesp_hw_support.a,rtc_init.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32c2/rtc_init.c.obj
libesp_hw_support.a,rtc_module.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/rtc_module.c.obj
libesp_hw_support.a,rtc_sleep.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32c2/rtc_sleep.c.obj
libesp_hw_support.a,rtc_time.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32c2/rtc_time.c.obj
libesp_hw_support.a,sleep_modes.c.obj,esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/sleep_modes.c.obj
libesp_phy.a,phy_init.c.obj,esp-idf/esp_phy/CMakeFiles/__idf_esp_phy.dir/src/phy_init.c.obj
libesp_phy.a,phy_override.c.obj,esp-idf/esp_phy/CMakeFiles/__idf_esp_phy.dir/src/phy_override.c.obj
libesp_pm.a,pm_locks.c.obj,esp-idf/esp_pm/CMakeFiles/__idf_esp_pm.dir/pm_locks.c.obj
libesp_pm.a,pm_impl.c.obj,esp-idf/esp_pm/CMakeFiles/__idf_esp_pm.dir/pm_impl.c.obj
libesp_ringbuf.a,ringbuf.c.obj,esp-idf/esp_ringbuf/CMakeFiles/__idf_esp_ringbuf.dir/ringbuf.c.obj
libesp_rom.a,esp_rom_systimer.c.obj,esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_systimer.c.obj
libesp_rom.a,esp_rom_uart.c.obj,esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_uart.c.obj
libesp_system.a,brownout.c.obj,esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/port/brownout.c.obj
libesp_system.a,cache_err_int.c.obj,esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/port/soc/esp32c2/cache_err_int.c.obj
libesp_system.a,cpu_start.c.obj,esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/port/cpu_start.c.obj
libesp_system.a,crosscore_int.c.obj,esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/crosscore_int.c.obj
libesp_system.a,esp_system.c.obj,esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/esp_system.c.obj
libesp_system.a,reset_reason.c.obj,esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/port/soc/esp32c2/reset_reason.c.obj
libesp_system.a,ubsan.c.obj,esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/ubsan.c.obj
libesp_timer.a,esp_timer.c.obj,esp-idf/esp_timer/CMakeFiles/__idf_esp_timer.dir/src/esp_timer.c.obj
libesp_timer.a,esp_timer_impl_systimer.c.obj,esp-idf/esp_timer/CMakeFiles/__idf_esp_timer.dir/src/esp_timer_impl_systimer.c.obj
libesp_timer.a,ets_timer_legacy.c.obj,esp-idf/esp_timer/CMakeFiles/__idf_esp_timer.dir/src/ets_timer_legacy.c.obj
libesp_timer.a,system_time.c.obj,esp-idf/esp_timer/CMakeFiles/__idf_esp_timer.dir/src/system_time.c.obj
libesp_wifi.a,esp_adapter.c.obj,esp-idf/esp_wifi/CMakeFiles/__idf_esp_wifi.dir/esp32c2/esp_adapter.c.obj
libfreertos.a,list.c.obj,esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/list.c.obj
libfreertos.a,port.c.obj,esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/portable/riscv/port.c.obj
libfreertos.a,port_common.c.obj,esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/portable/port_common.c.obj
libfreertos.a,port_systick.c.obj,esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/portable/port_systick.c.obj
libfreertos.a,queue.c.obj,esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/queue.c.obj
libfreertos.a,tasks.c.obj,esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/tasks.c.obj
libhal.a,brownout_hal.c.obj,esp-idf/hal/CMakeFiles/__idf_hal.dir/esp32c2/brownout_hal.c.obj
libhal.a,efuse_hal.c.obj,esp-idf/hal/CMakeFiles/__idf_hal.dir/efuse_hal.c.obj
libhal.a,efuse_hal.c.obj,esp-idf/hal/CMakeFiles/__idf_hal.dir/esp32c2/efuse_hal.c.obj
libheap.a,heap_caps.c.obj,esp-idf/heap/CMakeFiles/__idf_heap.dir/heap_caps.c.obj
libheap.a,multi_heap.c.obj,./esp-idf/heap/CMakeFiles/__idf_heap.dir/multi_heap.c.obj
liblog.a,log_freertos.c.obj,esp-idf/log/CMakeFiles/__idf_log.dir/log_freertos.c.obj
liblog.a,log.c.obj,esp-idf/log/CMakeFiles/__idf_log.dir/log.c.obj
libmbedcrypto.a,esp_mem.c.obj,esp-idf/mbedtls/mbedtls/library/CMakeFiles/mbedcrypto.dir/$IDF_PATH/components/mbedtls/port/esp_mem.c.obj
libnewlib.a,assert.c.obj,esp-idf/newlib/CMakeFiles/__idf_newlib.dir/assert.c.obj
libnewlib.a,heap.c.obj,esp-idf/newlib/CMakeFiles/__idf_newlib.dir/heap.c.obj
libnewlib.a,locks.c.obj,esp-idf/newlib/CMakeFiles/__idf_newlib.dir/locks.c.obj
libnewlib.a,reent_init.c.obj,esp-idf/newlib/CMakeFiles/__idf_newlib.dir/reent_init.c.obj
libnewlib.a,time.c.obj,esp-idf/newlib/CMakeFiles/__idf_newlib.dir/time.c.obj
libpthread.a,pthread.c.obj,esp-idf/pthread/CMakeFiles/__idf_pthread.dir/pthread.c.obj
libriscv.a,interrupt.c.obj,esp-idf/riscv/CMakeFiles/__idf_riscv.dir/interrupt.c.obj
libspi_flash.a,flash_brownout_hook.c.obj,esp-idf/spi_flash/CMakeFiles/__idf_spi_flash.dir/flash_brownout_hook.c.obj
libspi_flash.a,flash_ops.c.obj,esp-idf/spi_flash/CMakeFiles/__idf_spi_flash.dir/flash_ops.c.obj
libspi_flash.a,spi_flash_os_func_app.c.obj,esp-idf/spi_flash/CMakeFiles/__idf_spi_flash.dir/spi_flash_os_func_app.c.obj
libspi_flash.a,spi_flash_os_func_noos.c.obj,esp-idf/spi_flash/CMakeFiles/__idf_spi_flash.dir/spi_flash_os_func_noos.c.obj
1 library object path
2 libbootloader_support.a bootloader_flash.c.obj esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/bootloader_flash/src/bootloader_flash.c.obj
3 libbootloader_support.a flash_encrypt.c.obj esp-idf/bootloader_support/CMakeFiles/__idf_bootloader_support.dir/src/flash_encrypt.c.obj
4 libbt.a bt_osi_mem.c.obj esp-idf/bt/CMakeFiles/__idf_bt.dir/porting/mem/bt_osi_mem.c.obj
5 libbt.a bt.c.obj esp-idf/bt/CMakeFiles/__idf_bt.dir/controller/esp32c2/bt.c.obj
6 libbt.a npl_os_freertos.c.obj esp-idf/bt/CMakeFiles/__idf_bt.dir/porting/npl/freertos/src/npl_os_freertos.c.obj
7 libbt.a nimble_port.c.obj esp-idf/bt/CMakeFiles/__idf_bt.dir/host/nimble/nimble/porting/nimble/src/nimble_port.c.obj
8 libdriver.a gpio.c.obj esp-idf/driver/CMakeFiles/__idf_driver.dir/gpio/gpio.c.obj
9 libesp_app_format.a esp_app_desc.c.obj esp-idf/esp_app_format/CMakeFiles/__idf_esp_app_format.dir/esp_app_desc.c.obj
10 libesp_hw_support.a cpu.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/cpu.c.obj
11 libesp_hw_support.a esp_clk.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/esp_clk.c.obj
12 libesp_hw_support.a esp_memory_utils.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/esp_memory_utils.c.obj
13 libesp_hw_support.a hw_random.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/hw_random.c.obj
14 libesp_hw_support.a intr_alloc.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/intr_alloc.c.obj
15 libesp_hw_support.a periph_ctrl.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/periph_ctrl.c.obj
16 libesp_hw_support.a regi2c_ctrl.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/regi2c_ctrl.c.obj
17 libesp_hw_support.a rtc_clk.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32c2/rtc_clk.c.obj
18 libesp_hw_support.a rtc_init.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32c2/rtc_init.c.obj
19 libesp_hw_support.a rtc_module.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/rtc_module.c.obj
20 libesp_hw_support.a rtc_sleep.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32c2/rtc_sleep.c.obj
21 libesp_hw_support.a rtc_time.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/port/esp32c2/rtc_time.c.obj
22 libesp_hw_support.a sleep_modes.c.obj esp-idf/esp_hw_support/CMakeFiles/__idf_esp_hw_support.dir/sleep_modes.c.obj
23 libesp_phy.a phy_init.c.obj esp-idf/esp_phy/CMakeFiles/__idf_esp_phy.dir/src/phy_init.c.obj
24 libesp_phy.a phy_override.c.obj esp-idf/esp_phy/CMakeFiles/__idf_esp_phy.dir/src/phy_override.c.obj
25 libesp_pm.a pm_locks.c.obj esp-idf/esp_pm/CMakeFiles/__idf_esp_pm.dir/pm_locks.c.obj
26 libesp_pm.a pm_impl.c.obj esp-idf/esp_pm/CMakeFiles/__idf_esp_pm.dir/pm_impl.c.obj
27 libesp_ringbuf.a ringbuf.c.obj esp-idf/esp_ringbuf/CMakeFiles/__idf_esp_ringbuf.dir/ringbuf.c.obj
28 libesp_rom.a esp_rom_systimer.c.obj esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_systimer.c.obj
29 libesp_rom.a esp_rom_uart.c.obj esp-idf/esp_rom/CMakeFiles/__idf_esp_rom.dir/patches/esp_rom_uart.c.obj
30 libesp_system.a brownout.c.obj esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/port/brownout.c.obj
31 libesp_system.a cache_err_int.c.obj esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/port/soc/esp32c2/cache_err_int.c.obj
32 libesp_system.a cpu_start.c.obj esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/port/cpu_start.c.obj
33 libesp_system.a crosscore_int.c.obj esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/crosscore_int.c.obj
34 libesp_system.a esp_system.c.obj esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/esp_system.c.obj
35 libesp_system.a reset_reason.c.obj esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/port/soc/esp32c2/reset_reason.c.obj
36 libesp_system.a ubsan.c.obj esp-idf/esp_system/CMakeFiles/__idf_esp_system.dir/ubsan.c.obj
37 libesp_timer.a esp_timer.c.obj esp-idf/esp_timer/CMakeFiles/__idf_esp_timer.dir/src/esp_timer.c.obj
38 libesp_timer.a esp_timer_impl_systimer.c.obj esp-idf/esp_timer/CMakeFiles/__idf_esp_timer.dir/src/esp_timer_impl_systimer.c.obj
39 libesp_timer.a ets_timer_legacy.c.obj esp-idf/esp_timer/CMakeFiles/__idf_esp_timer.dir/src/ets_timer_legacy.c.obj
40 libesp_timer.a system_time.c.obj esp-idf/esp_timer/CMakeFiles/__idf_esp_timer.dir/src/system_time.c.obj
41 libesp_wifi.a esp_adapter.c.obj esp-idf/esp_wifi/CMakeFiles/__idf_esp_wifi.dir/esp32c2/esp_adapter.c.obj
42 libfreertos.a list.c.obj esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/list.c.obj
43 libfreertos.a port.c.obj esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/portable/riscv/port.c.obj
44 libfreertos.a port_common.c.obj esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/portable/port_common.c.obj
45 libfreertos.a port_systick.c.obj esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/portable/port_systick.c.obj
46 libfreertos.a queue.c.obj esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/queue.c.obj
47 libfreertos.a tasks.c.obj esp-idf/freertos/CMakeFiles/__idf_freertos.dir/FreeRTOS-Kernel/tasks.c.obj
48 libhal.a brownout_hal.c.obj esp-idf/hal/CMakeFiles/__idf_hal.dir/esp32c2/brownout_hal.c.obj
49 libhal.a efuse_hal.c.obj esp-idf/hal/CMakeFiles/__idf_hal.dir/efuse_hal.c.obj
50 libhal.a efuse_hal.c.obj esp-idf/hal/CMakeFiles/__idf_hal.dir/esp32c2/efuse_hal.c.obj
51 libheap.a heap_caps.c.obj esp-idf/heap/CMakeFiles/__idf_heap.dir/heap_caps.c.obj
52 libheap.a multi_heap.c.obj ./esp-idf/heap/CMakeFiles/__idf_heap.dir/multi_heap.c.obj
53 liblog.a log_freertos.c.obj esp-idf/log/CMakeFiles/__idf_log.dir/log_freertos.c.obj
54 liblog.a log.c.obj esp-idf/log/CMakeFiles/__idf_log.dir/log.c.obj
55 libmbedcrypto.a esp_mem.c.obj esp-idf/mbedtls/mbedtls/library/CMakeFiles/mbedcrypto.dir/$IDF_PATH/components/mbedtls/port/esp_mem.c.obj
56 libnewlib.a assert.c.obj esp-idf/newlib/CMakeFiles/__idf_newlib.dir/assert.c.obj
57 libnewlib.a heap.c.obj esp-idf/newlib/CMakeFiles/__idf_newlib.dir/heap.c.obj
58 libnewlib.a locks.c.obj esp-idf/newlib/CMakeFiles/__idf_newlib.dir/locks.c.obj
59 libnewlib.a reent_init.c.obj esp-idf/newlib/CMakeFiles/__idf_newlib.dir/reent_init.c.obj
60 libnewlib.a time.c.obj esp-idf/newlib/CMakeFiles/__idf_newlib.dir/time.c.obj
61 libpthread.a pthread.c.obj esp-idf/pthread/CMakeFiles/__idf_pthread.dir/pthread.c.obj
62 libriscv.a interrupt.c.obj esp-idf/riscv/CMakeFiles/__idf_riscv.dir/interrupt.c.obj
63 libspi_flash.a flash_brownout_hook.c.obj esp-idf/spi_flash/CMakeFiles/__idf_spi_flash.dir/flash_brownout_hook.c.obj
64 libspi_flash.a flash_ops.c.obj esp-idf/spi_flash/CMakeFiles/__idf_spi_flash.dir/flash_ops.c.obj
65 libspi_flash.a spi_flash_os_func_app.c.obj esp-idf/spi_flash/CMakeFiles/__idf_spi_flash.dir/spi_flash_os_func_app.c.obj
66 libspi_flash.a spi_flash_os_func_noos.c.obj esp-idf/spi_flash/CMakeFiles/__idf_spi_flash.dir/spi_flash_os_func_noos.c.obj

View File

@ -0,0 +1,311 @@
#!/usr/bin/env python3
#
# SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
# SPDX-License-Identifier: Apache-2.0
import logging
import argparse
import csv
import os
import subprocess
import sys
import re
from io import StringIO
import configuration
sys.path.append(os.environ['IDF_PATH'] + '/tools/ldgen')
sys.path.append(os.environ['IDF_PATH'] + '/tools/ldgen/ldgen')
from entity import EntityDB
espidf_objdump = None
def lib_secs(lib, file, lib_path):
new_env = os.environ.copy()
new_env['LC_ALL'] = 'C'
dump = StringIO(subprocess.check_output([espidf_objdump, '-h', lib_path], env=new_env).decode())
dump.name = lib
sections_infos = EntityDB()
sections_infos.add_sections_info(dump)
secs = sections_infos.get_sections(lib, file.split('.')[0] + '.c')
if len(secs) == 0:
secs = sections_infos.get_sections(lib, file.split('.')[0])
if len(secs) == 0:
raise ValueError('Failed to get sections from lib %s'%(lib_path))
return secs
def filter_secs(secs_a, secs_b):
new_secs = list()
for s_a in secs_a:
for s_b in secs_b:
if s_b in s_a:
new_secs.append(s_a)
return new_secs
def strip_secs(secs_a, secs_b):
secs = list(set(secs_a) - set(secs_b))
secs.sort()
return secs
def func2sect(func):
if ' ' in func:
func_l = func.split(' ')
else:
func_l = list()
func_l.append(func)
secs = list()
for l in func_l:
if '.iram1.' not in l:
secs.append('.literal.%s'%(l,))
secs.append('.text.%s'%(l, ))
else:
secs.append(l)
return secs
class filter_c:
def __init__(self, file):
lines = open(file).read().splitlines()
self.libs_desc = ''
self.libs = ''
for l in lines:
if ') .iram1 EXCLUDE_FILE(*' in l and ') .iram1.*)' in l:
desc = '\(EXCLUDE_FILE\((.*)\) .iram1 '
self.libs_desc = re.search(desc, l)[1]
self.libs = self.libs_desc.replace('*', '')
return
def match(self, lib):
if lib in self.libs:
print('Remove lib %s'%(lib))
return True
return False
def add(self):
return self.libs_desc
class target_c:
def __init__(self, lib, lib_path, file, fsecs):
self.lib = lib
self.file = file
self.lib_path = lib_path
self.fsecs = func2sect(fsecs)
self.desc = '*%s:%s.*'%(lib, file.split('.')[0])
secs = lib_secs(lib, file, lib_path)
if '.iram1.' in self.fsecs[0]:
self.secs = filter_secs(secs, ('.iram1.', ))
else:
self.secs = filter_secs(secs, ('.iram1.', '.text.', '.literal.'))
self.isecs = strip_secs(self.secs, self.fsecs)
def __str__(self):
s = 'lib=%s\nfile=%s\lib_path=%s\ndesc=%s\nsecs=%s\nfsecs=%s\nisecs=%s\n'%(\
self.lib, self.file, self.lib_path, self.desc, self.secs, self.fsecs,\
self.isecs)
return s
class relink_c:
def __init__(self, input, library_file, object_file, function_file, sdkconfig_file, missing_function_info):
self.filter = filter_c(input)
libraries = configuration.generator(library_file, object_file, function_file, sdkconfig_file, missing_function_info, espidf_objdump)
self.targets = list()
for i in libraries.libs:
lib = libraries.libs[i]
if self.filter.match(lib.name):
continue
for j in lib.objs:
obj = lib.objs[j]
self.targets.append(target_c(lib.name, lib.path, obj.name,
' '.join(obj.sections())))
# for i in self.targets:
# print(i)
self.__transform__()
def __transform__(self):
iram1_exclude = list()
iram1_include = list()
flash_include = list()
for t in self.targets:
secs = filter_secs(t.fsecs, ('.iram1.', ))
if len(secs) > 0:
iram1_exclude.append(t.desc)
secs = filter_secs(t.isecs, ('.iram1.', ))
if len(secs) > 0:
iram1_include.append(' %s(%s)'%(t.desc, ' '.join(secs)))
secs = t.fsecs
if len(secs) > 0:
flash_include.append(' %s(%s)'%(t.desc, ' '.join(secs)))
self.iram1_exclude = ' *(EXCLUDE_FILE(%s %s) .iram1.*) *(EXCLUDE_FILE(%s %s) .iram1)' % \
(self.filter.add(), ' '.join(iram1_exclude), \
self.filter.add(), ' '.join(iram1_exclude))
self.iram1_include = '\n'.join(iram1_include)
self.flash_include = '\n'.join(flash_include)
logging.debug('IRAM1 Exclude: %s'%(self.iram1_exclude))
logging.debug('IRAM1 Include: %s'%(self.iram1_include))
logging.debug('Flash Include: %s'%(self.flash_include))
def __replace__(self, lines):
def is_iram_desc(l):
if '*(.iram1 .iram1.*)' in l or (') .iram1 EXCLUDE_FILE(*' in l and ') .iram1.*)' in l):
return True
return False
iram_start = False
flash_done = False
for i in range(0, len(lines) - 1):
l = lines[i]
if '.iram0.text :' in l:
logging.debug('start to process .iram0.text')
iram_start = True
elif '.dram0.data :' in l:
logging.debug('end to process .iram0.text')
iram_start = False
elif is_iram_desc(l):
if iram_start:
lines[i] = '%s\n%s\n'%(self.iram1_exclude, self.iram1_include)
elif '(.stub .gnu.warning' in l:
if not flash_done:
lines[i] = '%s\n\n%s'%(self.flash_include, l)
elif self.flash_include in l:
flash_done = True
else:
if iram_start:
new_l = self._replace_func(l)
if new_l:
lines[i] = new_l
return lines
def _replace_func(self, l):
for t in self.targets:
if t.desc in l:
S = '.literal .literal.* .text .text.*'
if S in l:
if len(t.isecs) > 0:
return l.replace(S, ' '.join(t.isecs))
else:
return ' '
S = '%s(%s)'%(t.desc, ' '.join(t.fsecs))
if S in l:
return ' '
replaced = False
for s in t.fsecs:
s2 = s + ' '
if s2 in l:
l = l.replace(s2, '')
replaced = True
s2 = s + ')'
if s2 in l:
l = l.replace(s2, ')')
replaced = True
if '( )' in l or '()' in l:
return ' '
if replaced:
return l
else:
index = '*%s:(EXCLUDE_FILE'%(t.lib)
if index in l and t.file.split('.')[0] not in l:
for m in self.targets:
index = '*%s:(EXCLUDE_FILE'%(m.lib)
if index in l and m.file.split('.')[0] not in l:
l = l.replace('EXCLUDE_FILE(', 'EXCLUDE_FILE(%s '%(m.desc))
if len(m.isecs) > 0:
l += '\n %s(%s)'%(m.desc, ' '.join(m.isecs))
return l
return False
def save(self, input, output):
lines = open(input).read().splitlines()
lines = self.__replace__(lines)
open(output, 'w+').write('\n'.join(lines))
def main():
argparser = argparse.ArgumentParser(description='Relinker script generator')
argparser.add_argument(
'--input', '-i',
help='Linker template file',
type=str)
argparser.add_argument(
'--output', '-o',
help='Output linker script',
type=str)
argparser.add_argument(
'--library', '-l',
help='Library description directory',
type=str)
argparser.add_argument(
'--object', '-b',
help='Object description file',
type=str)
argparser.add_argument(
'--function', '-f',
help='Function description file',
type=str)
argparser.add_argument(
'--sdkconfig', '-s',
help='sdkconfig file',
type=str)
argparser.add_argument(
'--objdump', '-g',
help='GCC objdump command',
type=str)
argparser.add_argument(
'--debug', '-d',
help='Debug level(option is \'debug\')',
default='no',
type=str)
argparser.add_argument(
'--missing_function_info',
help='Print error information instead of throwing exception when missing function',
default=False,
type=bool)
args = argparser.parse_args()
if args.debug == 'debug':
logging.basicConfig(level=logging.DEBUG)
logging.debug('input: %s'%(args.input))
logging.debug('output: %s'%(args.output))
logging.debug('library: %s'%(args.library))
logging.debug('object: %s'%(args.object))
logging.debug('function: %s'%(args.function))
logging.debug('sdkconfig:%s'%(args.sdkconfig))
logging.debug('objdump: %s'%(args.objdump))
logging.debug('debug: %s'%(args.debug))
logging.debug('missing_function_info: %s'%(args.missing_function_info))
global espidf_objdump
espidf_objdump = args.objdump
relink = relink_c(args.input, args.library, args.object, args.function, args.sdkconfig, args.missing_function_info)
relink.save(args.input, args.output)
if __name__ == '__main__':
main()

View File

@ -0,0 +1,8 @@
# The following lines of boilerplate have to be in your project's CMakeLists
# in this exact order for cmake to work correctly
cmake_minimum_required(VERSION 3.5)
set(EXTRA_COMPONENT_DIRS "$ENV{IDF_PATH}/tools/unit-test-app/components"
"../../cmake_utilities")
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
project(cmake_utilities_test_apps)

View File

@ -0,0 +1,10 @@
idf_component_register( SRC_DIRS "."
INCLUDE_DIRS "."
REQUIRES cmake_utilities)
include(gcc)
include(gen_compressed_ota)
include(gen_single_bin)
include(package_manager)
include(relinker)
cu_pkg_define_version(${CMAKE_CURRENT_LIST_DIR})

View File

@ -0,0 +1,6 @@
version: "3.2.1"
description: Test2 for cmake utilities
url: https://github.com/espressif/esp-iot-solution/tree/master/tools/cmake_utilities
issues: https://github.com/espressif/esp-iot-solution/issues
dependencies:
idf: ">=4.1"

View File

@ -0,0 +1,16 @@
#include <stdio.h>
int test_component2_version_major()
{
return TEST_COMPONENT2_VER_MAJOR;
}
int test_component2_version_minor()
{
return TEST_COMPONENT2_VER_MINOR;
}
int test_component2_version_patch()
{
return TEST_COMPONENT2_VER_PATCH;
}

View File

@ -0,0 +1,14 @@
#include <stdio.h>
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
int test_component2_version_major();
int test_component2_version_minor();
int test_component2_version_patch();
#ifdef __cplusplus
}
#endif

View File

@ -0,0 +1,10 @@
idf_component_register( SRC_DIRS "."
INCLUDE_DIRS "."
REQUIRES cmake_utilities)
include(gcc)
include(gen_compressed_ota)
include(gen_single_bin)
include(package_manager)
include(relinker)
cu_pkg_define_version(${CMAKE_CURRENT_LIST_DIR})

View File

@ -0,0 +1,6 @@
version: "1.2.3"
description: Test1 for cmake utilities
url: https://github.com/espressif/esp-iot-solution/tree/master/tools/cmake_utilities
issues: https://github.com/espressif/esp-iot-solution/issues
dependencies:
idf: ">=4.1"

View File

@ -0,0 +1,16 @@
#include <stdio.h>
int test_component1_version_major()
{
return TEST_COMPONENT1_VER_MAJOR;
}
int test_component1_version_minor()
{
return TEST_COMPONENT1_VER_MINOR;
}
int test_component1_version_patch()
{
return TEST_COMPONENT1_VER_PATCH;
}

View File

@ -0,0 +1,14 @@
#include <stdio.h>
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
int test_component1_version_major();
int test_component1_version_minor();
int test_component1_version_patch();
#ifdef __cplusplus
}
#endif

View File

@ -0,0 +1,3 @@
idf_component_register(SRC_DIRS "."
INCLUDE_DIRS "."
REQUIRES unity test_utils test_component1 TEST-component2)

View File

@ -0,0 +1,59 @@
/*
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdio.h>
#include <inttypes.h>
#include "freertos/FreeRTOS.h"
#include "esp_system.h"
#include "esp_log.h"
#include "unity.h"
#include "test_component1.h"
#include "test_component2.h"
/* USB PIN fixed in esp32-s2, can not use io matrix */
#define TEST_MEMORY_LEAK_THRESHOLD (-400)
TEST_CASE("Test package manager version", "[cmake_utilities][package_manager]")
{
esp_log_level_set("*", ESP_LOG_INFO);
TEST_ASSERT_EQUAL_INT(test_component1_version_major(), 1);
TEST_ASSERT_EQUAL_INT(test_component1_version_minor(), 2);
TEST_ASSERT_EQUAL_INT(test_component1_version_patch(), 3);
TEST_ASSERT_EQUAL_INT(test_component2_version_major(), 3);
TEST_ASSERT_EQUAL_INT(test_component2_version_minor(), 2);
TEST_ASSERT_EQUAL_INT(test_component2_version_patch(), 1);
}
static size_t before_free_8bit;
static size_t before_free_32bit;
static void check_leak(size_t before_free, size_t after_free, const char *type)
{
ssize_t delta = after_free - before_free;
printf("MALLOC_CAP_%s: Before %u bytes free, After %u bytes free (delta %d)\n", type, before_free, after_free, delta);
TEST_ASSERT_MESSAGE(delta >= TEST_MEMORY_LEAK_THRESHOLD, "memory leak");
}
void setUp(void)
{
before_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
before_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
}
void tearDown(void)
{
size_t after_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
size_t after_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
check_leak(before_free_8bit, after_free_8bit, "8BIT");
check_leak(before_free_32bit, after_free_32bit, "32BIT");
}
void app_main(void)
{
printf("Cmake Utilities TEST \n");
unity_run_menu();
}

View File

@ -0,0 +1,20 @@
'''
Steps to run these cases:
- Build
- . ${IDF_PATH}/export.sh
- pip install idf_build_apps
- python tools/build_apps.py tools/cmake_utilities/test_apps -t esp32s2
- Test
- pip install -r tools/requirements/requirement.pytest.txt
- pytest tools/cmake_utilities/test_apps --target esp32s2
'''
import pytest
from pytest_embedded import Dut
@pytest.mark.target('esp32s3')
@pytest.mark.env('generic')
def test_cmake_utilities(dut: Dut)-> None:
dut.expect_exact('Press ENTER to see the list of tests.')
dut.write('*')
dut.expect_unity_test_output(timeout = 1000)

View File

@ -1,9 +1,9 @@
dependencies:
espressif/button:
component_hash: c3ee3ba339a3848977496d0157008ae574a24fc59f54d27c93ab51b14446a2fb
component_hash: null
source:
service_url: https://api.components.espressif.com/
type: service
path: /home/yu/Source_Space/ESP32_Project_Space/Air_58Printer/components/espressif__button
type: local
version: 3.3.1
espressif/cmake_utilities:
component_hash: 351350613ceafba240b761b4ea991e0f231ac7a9f59a9ee901f751bddc0bb18f
@ -11,23 +11,11 @@ dependencies:
service_url: https://api.components.espressif.com/
type: service
version: 0.5.3
espressif/esp_tinyusb:
component_hash: f151d680d6847bfcfd5d8eb6d1c3ff926c208e6b963b2e83643a141bc70baa15
source:
service_url: https://api.components.espressif.com/
type: service
version: 1.4.4
espressif/tinyusb:
component_hash: 214989d502fc168241a4a4f83b097d8ac44a93cd6f1787b4ac10069a8b3bebd3
source:
service_url: https://api.components.espressif.com/
type: service
version: 0.15.0~10
idf:
component_hash: null
source:
type: idf
version: 5.3.0
manifest_hash: ad049ea0610606405810b748f12dbd7234230135e0c85ab105d02f6ae523ccdf
target: esp32s3
manifest_hash: 9a1ad333c087c0f6ba914b30dad014f27f8198c5ae062a2cb9a1a61b1a4126b0
target: esp32c3
version: 1.0.0

View File

@ -1,7 +1,6 @@
## IDF Component Manager Manifest File
dependencies:
espressif/button: "*"
espressif/esp_tinyusb: "^1"
## Required IDF version
idf:
version: ">=4.1.0"

View File

@ -9,9 +9,6 @@
#include "driver/gpio.h"
#include "esp_system.h"
#include "esp_log.h"
#include "tinyusb.h"
#include "tusb_cdc_acm.h"
#include "module/include/Sys_Printer.h"
#include "module/Printer_Config.h"
#include "esp_adc/adc_continuous.h"
@ -57,14 +54,14 @@ void app_main(void)
(chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "embedded" : "external");
printf("Minimum free heap size: %" PRIu32 " bytes\n", esp_get_minimum_free_heap_size());
Usb_Virtual_serial_port_init();
Printer_group = xEventGroupCreate();
button_init();
register_gpio_wakeup();
Printer_Bsp_Init();
Printer_run_init();
// button_init();
// register_gpio_wakeup();
// Printer_Bsp_Init();
// Printer_run_init();
// xTaskCreate(light_sleep_task, "light_sleep_task", 4096, NULL, 6, NULL);
while (1) {
if(xQueueReceive(User_data_queue, &Receive_All_data, portMAX_DELAY))

View File

@ -2,17 +2,22 @@
#include "esp_log.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "tinyusb.h"
#include "tusb_cdc_acm.h"
#include "sdkconfig.h"
#include "include/Sys_Printer.h"
#include "driver/usb_serial_jtag.h"
static const char *TAG = "usb_cdc";
#define BUF_SIZE (1024)
#define ECHO_TASK_STACK_SIZE (4096)
extern QueueHandle_t User_data_queue;
user_data_t Receive_usb_data;
#if CONFIG_IDF_TARGET_ESP32S3
#include "tinyusb.h"
#include "tusb_cdc_acm.h"
// static uint8_t buf[CONFIG_TINYUSB_CDC_RX_BUFSIZE + 1];
void tinyusb_cdc_rx_callback(int itf, cdcacm_event_t *event)
@ -44,11 +49,40 @@ void tinyusb_cdc_line_state_changed_callback(int itf, cdcacm_event_t *event)
int rts = event->line_state_changed_data.rts;
ESP_LOGI(TAG, "Line state changed on channel %d: DTR:%d, RTS:%d", itf, dtr, rts);
}
#endif
#if CONFIG_IDF_TARGET_ESP32C3
static void USB_Serial_rx_task(void *arg)
{
// Configure a temporary buffer for the incoming data
uint8_t *data = (uint8_t *) malloc(BUF_SIZE);
if (data == NULL) {
ESP_LOGE("usb_serial_jtag echo", "no memory for data");
return;
}
while (1) {
int len = usb_serial_jtag_read_bytes(data, (BUF_SIZE - 1), 20 / portTICK_PERIOD_MS);
// Write data back to the USB SERIAL JTAG
if (len) {
usb_serial_jtag_write_bytes((const char *) data, len, 20 / portTICK_PERIOD_MS);
data[len] = '\0';
ESP_LOG_BUFFER_HEXDUMP("Recv str: ", data, len, ESP_LOG_INFO);
}
}
}
#endif
void Usb_Virtual_serial_port_init(void)
{
ESP_LOGI(TAG, "USB initialization");
#if CONFIG_IDF_TARGET_ESP32S3
const tinyusb_config_t tusb_cfg = {
.device_descriptor = NULL,
.string_descriptor = NULL,
@ -74,5 +108,19 @@ void Usb_Virtual_serial_port_init(void)
TINYUSB_CDC_ACM_0,
CDC_EVENT_LINE_STATE_CHANGED,
&tinyusb_cdc_line_state_changed_callback));
#else
// Configure USB SERIAL JTAG
usb_serial_jtag_driver_config_t usb_serial_jtag_config = {
.rx_buffer_size = BUF_SIZE,
.tx_buffer_size = BUF_SIZE,
};
ESP_ERROR_CHECK(usb_serial_jtag_driver_install(&usb_serial_jtag_config));
ESP_LOGI("usb_serial_jtag echo", "USB_SERIAL_JTAG init done");
xTaskCreate(USB_Serial_rx_task, "USB SERIAL JTAG_echo_task", ECHO_TASK_STACK_SIZE, NULL, 10, NULL);
#endif
ESP_LOGI(TAG, "USB initialization DONE");
}
}

View File

@ -1 +0,0 @@
f151d680d6847bfcfd5d8eb6d1c3ff926c208e6b963b2e83643a141bc70baa15

View File

@ -1,53 +0,0 @@
## 1.4.4
- esp_tinyusb: Added HighSpeed and Qualifier device descriptors in tinyusb configuration
- CDC-ACM: Removed MIN() definition if already defined
- MSC: Fixed EP size selecting in default configuration descriptor
## 1.4.3
- esp_tinyusb: Added ESP32P4 support (HS only)
## 1.4.2
- MSC: Fixed maximum files open
- Added uninstall function
## 1.4.0
- MSC: Fixed integer overflows
- CDC-ACM: Removed intermediate RX ringbuffer
- CDC-ACM: Increased default FIFO size to 512 bytes
- CDC-ACM: Fixed Virtual File System binding
## 1.3.0
- Added NCM extension
## 1.2.1 - 1.2.2
- Minor bugfixes
## 1.2.0
- Added MSC extension for accessing SPI Flash on memory card https://github.com/espressif/idf-extra-components/commit/a8c00d7707ba4ceeb0970c023d702c7768dba3dc
## 1.1.0
- Added support for NCM, ECM/RNDIS, DFU and Bluetooth TinyUSB drivers https://github.com/espressif/idf-extra-components/commit/79f35c9b047b583080f93a63310e2ee7d82ef17b
## 1.0.4
- Cleaned up string descriptors handling https://github.com/espressif/idf-extra-components/commit/046cc4b02f524d5c7e3e56480a473cfe844dc3d6
## 1.0.2 - 1.0.3
- Minor bugfixes
## 1.0.1
- CDC-ACM: Return ESP_OK if there is nothing to flush https://github.com/espressif/idf-extra-components/commit/388ff32eb09aa572d98c54cb355f1912ce42707c
## 1.0.0
- Initial version based on [esp-idf v4.4.3](https://github.com/espressif/esp-idf/tree/v4.4.3/components/tinyusb)

View File

@ -1,53 +0,0 @@
set(srcs
"descriptors_control.c"
"tinyusb.c"
"usb_descriptors.c"
)
if(NOT CONFIG_TINYUSB_NO_DEFAULT_TASK)
list(APPEND srcs "tusb_tasks.c")
endif() # CONFIG_TINYUSB_NO_DEFAULT_TASK
if(CONFIG_TINYUSB_CDC_ENABLED)
list(APPEND srcs
"cdc.c"
"tusb_cdc_acm.c"
)
if(CONFIG_VFS_SUPPORT_IO)
list(APPEND srcs
"tusb_console.c"
"vfs_tinyusb.c"
)
endif() # CONFIG_VFS_SUPPORT_IO
endif() # CONFIG_TINYUSB_CDC_ENABLED
if(CONFIG_TINYUSB_MSC_ENABLED)
list(APPEND srcs
tusb_msc_storage.c
)
endif() # CONFIG_TINYUSB_MSC_ENABLED
if(CONFIG_TINYUSB_NET_MODE_NCM)
list(APPEND srcs
tinyusb_net.c
)
endif() # CONFIG_TINYUSB_NET_MODE_NCM
idf_component_register(SRCS ${srcs}
INCLUDE_DIRS "include"
PRIV_INCLUDE_DIRS "include_private"
PRIV_REQUIRES usb
REQUIRES fatfs vfs
)
# Determine whether tinyusb is fetched from component registry or from local path
idf_build_get_property(build_components BUILD_COMPONENTS)
if(tinyusb IN_LIST build_components)
set(tinyusb_name tinyusb) # Local component
else()
set(tinyusb_name espressif__tinyusb) # Managed component
endif()
# Pass tusb_config.h from this component to TinyUSB
idf_component_get_property(tusb_lib ${tinyusb_name} COMPONENT_LIB)
target_include_directories(${tusb_lib} PRIVATE "include")

View File

@ -1,272 +0,0 @@
menu "TinyUSB Stack"
config TINYUSB_DEBUG_LEVEL
int "TinyUSB log level (0-3)"
default 1
range 0 3
help
Specify verbosity of TinyUSB log output.
choice TINYUSB_RHPORT
depends on IDF_TARGET_ESP32P4
prompt "TinyUSB PHY"
default TINYUSB_RHPORT_HS
help
Allows set the USB PHY Controller for TinyUSB: HS (USB OTG2.0 PHY for HighSpeed)
config TINYUSB_RHPORT_HS
bool "HS"
endchoice
menu "TinyUSB task configuration"
config TINYUSB_NO_DEFAULT_TASK
bool "Do not create a TinyUSB task"
default n
help
This option allows to not create the FreeRTOS task during the driver initialization.
User will have to handle TinyUSB events manually.
config TINYUSB_TASK_PRIORITY
int "TinyUSB task priority"
default 5
depends on !TINYUSB_NO_DEFAULT_TASK
help
Set the priority of the default TinyUSB main task.
config TINYUSB_TASK_STACK_SIZE
int "TinyUSB task stack size (bytes)"
default 4096
depends on !TINYUSB_NO_DEFAULT_TASK
help
Set the stack size of the default TinyUSB main task.
choice TINYUSB_TASK_AFFINITY
prompt "TinyUSB task affinity"
default TINYUSB_TASK_AFFINITY_NO_AFFINITY
depends on !TINYUSB_NO_DEFAULT_TASK
help
Allows setting TinyUSB tasks affinity, i.e. whether the task is pinned to
CPU0, pinned to CPU1, or allowed to run on any CPU.
config TINYUSB_TASK_AFFINITY_NO_AFFINITY
bool "No affinity"
config TINYUSB_TASK_AFFINITY_CPU0
bool "CPU0"
config TINYUSB_TASK_AFFINITY_CPU1
bool "CPU1"
depends on !FREERTOS_UNICORE
endchoice
config TINYUSB_TASK_AFFINITY
hex
default FREERTOS_NO_AFFINITY if TINYUSB_TASK_AFFINITY_NO_AFFINITY
default 0x0 if TINYUSB_TASK_AFFINITY_CPU0
default 0x1 if TINYUSB_TASK_AFFINITY_CPU1
config TINYUSB_INIT_IN_DEFAULT_TASK
bool "Initialize TinyUSB stack within the default TinyUSB task"
default n
depends on !TINYUSB_NO_DEFAULT_TASK
help
Run TinyUSB stack initialization just after starting the default TinyUSB task.
This is especially useful in multicore scenarios, when we need to pin the task
to a specific core and, at the same time initialize TinyUSB stack
(i.e. install interrupts) on the same core.
endmenu
menu "Descriptor configuration"
comment "You can provide your custom descriptors via tinyusb_driver_install()"
config TINYUSB_DESC_USE_ESPRESSIF_VID
bool "VID: Use Espressif's vendor ID"
default y
help
Enable this option, USB device will use Espressif's vendor ID as its VID.
This is helpful at product develop stage.
config TINYUSB_DESC_CUSTOM_VID
hex "VID: Custom vendor ID"
default 0x1234
depends on !TINYUSB_DESC_USE_ESPRESSIF_VID
help
Custom Vendor ID.
config TINYUSB_DESC_USE_DEFAULT_PID
bool "PID: Use a default PID assigned to TinyUSB"
default y
help
Default TinyUSB PID assigning uses values 0x4000...0x4007.
config TINYUSB_DESC_CUSTOM_PID
hex "PID: Custom product ID"
default 0x5678
depends on !TINYUSB_DESC_USE_DEFAULT_PID
help
Custom Product ID.
config TINYUSB_DESC_BCD_DEVICE
hex "bcdDevice"
default 0x0100
help
Version of the firmware of the USB device.
config TINYUSB_DESC_MANUFACTURER_STRING
string "Manufacturer name"
default "Espressif Systems"
help
Name of the manufacturer of the USB device.
config TINYUSB_DESC_PRODUCT_STRING
string "Product name"
default "Espressif Device"
help
Name of the USB device.
config TINYUSB_DESC_SERIAL_STRING
string "Serial string"
default "123456"
help
Serial number of the USB device.
config TINYUSB_DESC_CDC_STRING
depends on TINYUSB_CDC_ENABLED
string "CDC Device String"
default "Espressif CDC Device"
help
Name of the CDC device.
config TINYUSB_DESC_MSC_STRING
depends on TINYUSB_MSC_ENABLED
string "MSC Device String"
default "Espressif MSC Device"
help
Name of the MSC device.
endmenu # "Descriptor configuration"
menu "Massive Storage Class (MSC)"
config TINYUSB_MSC_ENABLED
bool "Enable TinyUSB MSC feature"
default n
help
Enable TinyUSB MSC feature.
config TINYUSB_MSC_BUFSIZE
depends on TINYUSB_MSC_ENABLED
int "MSC FIFO size"
default 512
range 64 10000
help
MSC FIFO size, in bytes.
config TINYUSB_MSC_MOUNT_PATH
depends on TINYUSB_MSC_ENABLED
string "Mount Path"
default "/data"
help
MSC Mount Path of storage.
endmenu # "Massive Storage Class"
menu "Communication Device Class (CDC)"
config TINYUSB_CDC_ENABLED
bool "Enable TinyUSB CDC feature"
default n
help
Enable TinyUSB CDC feature.
config TINYUSB_CDC_COUNT
int "CDC Channel Count"
default 1
range 1 2
depends on TINYUSB_CDC_ENABLED
help
Number of independent serial ports.
config TINYUSB_CDC_RX_BUFSIZE
depends on TINYUSB_CDC_ENABLED
int "CDC FIFO size of RX channel"
default 512
range 64 10000
help
CDC FIFO size of RX channel.
config TINYUSB_CDC_TX_BUFSIZE
depends on TINYUSB_CDC_ENABLED
int "CDC FIFO size of TX channel"
default 512
help
CDC FIFO size of TX channel.
endmenu # "Communication Device Class"
menu "Musical Instrument Digital Interface (MIDI)"
config TINYUSB_MIDI_COUNT
int "TinyUSB MIDI interfaces count"
default 0
range 0 2
help
Setting value greater than 0 will enable TinyUSB MIDI feature.
endmenu # "Musical Instrument Digital Interface (MIDI)"
menu "Human Interface Device Class (HID)"
config TINYUSB_HID_COUNT
int "TinyUSB HID interfaces count"
default 0
range 0 4
help
Setting value greater than 0 will enable TinyUSB HID feature.
endmenu # "HID Device Class (HID)"
menu "Device Firmware Upgrade (DFU)"
choice TINYUSB_DFU_MODE
prompt "DFU mode"
default TINYUSB_DFU_MODE_NONE
help
Select which DFU driver you want to use.
config TINYUSB_DFU_MODE_DFU
bool "DFU"
config TINYUSB_DFU_MODE_DFU_RUNTIME
bool "DFU Runtime"
config TINYUSB_DFU_MODE_NONE
bool "None"
endchoice
config TINYUSB_DFU_BUFSIZE
depends on TINYUSB_DFU_MODE_DFU
int "DFU XFER BUFFSIZE"
default 512
help
DFU XFER BUFFSIZE.
endmenu # Device Firmware Upgrade (DFU)
menu "Bluetooth Host Class (BTH)"
config TINYUSB_BTH_ENABLED
bool "Enable TinyUSB BTH feature"
default n
help
Enable TinyUSB BTH feature.
config TINYUSB_BTH_ISO_ALT_COUNT
depends on TINYUSB_BTH_ENABLED
int "BTH ISO ALT COUNT"
default 0
help
BTH ISO ALT COUNT.
endmenu # "Bluetooth Host Device Class"
menu "Network driver (ECM/NCM/RNDIS)"
choice TINYUSB_NET_MODE
prompt "Network mode"
default TINYUSB_NET_MODE_NONE
help
Select network driver you want to use.
config TINYUSB_NET_MODE_ECM_RNDIS
bool "ECM/RNDIS"
config TINYUSB_NET_MODE_NCM
bool "NCM"
config TINYUSB_NET_MODE_NONE
bool "None"
endchoice
endmenu # "Network driver (ECM/NCM/RNDIS)"
endmenu # "TinyUSB Stack"

View File

@ -1,32 +0,0 @@
# Espressif's additions to TinyUSB
[![Component Registry](https://components.espressif.com/components/espressif/esp_tinyusb/badge.svg)](https://components.espressif.com/components/espressif/esp_tinyusb)
This component adds features to TinyUSB that help users with integrating TinyUSB with their ESP-IDF application.
It contains:
* Configuration of USB device and string descriptors
* USB Serial Device (CDC-ACM) with optional Virtual File System support
* Input and output streams through USB Serial Device. This feature is available only when Virtual File System support is enabled.
* Other USB classes (MIDI, MSC, HID…) support directly via TinyUSB
* VBUS monitoring for self-powered devices
* SPI Flash or sd-card access via MSC USB device Class.
## Documentation and examples
You can find documentation in [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/api-reference/peripherals/usb_device.html).
You can find examples in [ESP-IDF on GitHub](https://github.com/espressif/esp-idf/tree/master/examples/peripherals/usb/device).
## How to use?
This component is distributed via [IDF component manager](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/tools/idf-component-manager.html). Just add `idf_component.yml` file to your main component with the following content:
``` yaml
## IDF Component Manager Manifest File
dependencies:
esp_tinyusb: "~1.0.0"
```
Or simply run:
```
idf.py add-dependency esp_tinyusb~1.0.0
```

View File

@ -1,109 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdint.h>
#include "esp_check.h"
#include "esp_err.h"
#include "esp_log.h"
#include "tusb.h"
#include "cdc.h"
#define CDC_INTF_NUM CFG_TUD_CDC // number of cdc blocks
static esp_tusb_cdc_t *cdc_obj[CDC_INTF_NUM] = {};
static const char *TAG = "tusb_cdc";
esp_tusb_cdc_t *tinyusb_cdc_get_intf(int itf_num)
{
if (itf_num >= CDC_INTF_NUM || itf_num < 0) {
return NULL;
}
return cdc_obj[itf_num];
}
static esp_err_t cdc_obj_check(int itf, bool expected_inited, tusb_class_code_t expected_type)
{
esp_tusb_cdc_t *this_itf = tinyusb_cdc_get_intf(itf);
bool inited = (this_itf != NULL);
ESP_RETURN_ON_FALSE(expected_inited == inited, ESP_ERR_INVALID_STATE, TAG, "Wrong state of the interface. Expected state: %s", expected_inited ? "initialized" : "not initialized");
ESP_RETURN_ON_FALSE(!(inited && (expected_type != -1) && !(this_itf->type == expected_type)), ESP_ERR_INVALID_STATE, TAG, "Wrong type of the interface. Should be : 0x%x (tusb_class_code_t)", expected_type);
return ESP_OK;
}
static esp_err_t tusb_cdc_comm_init(int itf)
{
ESP_RETURN_ON_ERROR(cdc_obj_check(itf, false, -1), TAG, "cdc_obj_check failed");
cdc_obj[itf] = calloc(1, sizeof(esp_tusb_cdc_t));
if (cdc_obj[itf] != NULL) {
cdc_obj[itf]->type = TUSB_CLASS_CDC;
ESP_LOGD(TAG, "CDC Comm class initialized");
return ESP_OK;
} else {
ESP_LOGE(TAG, "CDC Comm initialization error");
return ESP_FAIL;
}
}
static esp_err_t tusb_cdc_deinit_comm(int itf)
{
ESP_RETURN_ON_ERROR(cdc_obj_check(itf, true, TUSB_CLASS_CDC), TAG, "cdc_obj_check failed");
free(cdc_obj[itf]);
cdc_obj[itf] = NULL;
return ESP_OK;
}
static esp_err_t tusb_cdc_data_init(int itf)
{
ESP_RETURN_ON_ERROR(cdc_obj_check(itf, false, TUSB_CLASS_CDC_DATA), TAG, "cdc_obj_check failed");
cdc_obj[itf] = calloc(1, sizeof(esp_tusb_cdc_t));
if (cdc_obj[itf] != NULL) {
cdc_obj[itf]->type = TUSB_CLASS_CDC_DATA;
ESP_LOGD(TAG, "CDC Data class initialized");
return ESP_OK;
} else {
ESP_LOGE(TAG, "CDC Data initialization error");
return ESP_FAIL;
}
}
static esp_err_t tusb_cdc_deinit_data(int itf)
{
ESP_RETURN_ON_ERROR(cdc_obj_check(itf, true, TUSB_CLASS_CDC_DATA), TAG, "cdc_obj_check failed");
free(cdc_obj[itf]);
cdc_obj[itf] = NULL;
return ESP_OK;
}
esp_err_t tinyusb_cdc_init(int itf, const tinyusb_config_cdc_t *cfg)
{
ESP_RETURN_ON_ERROR(cdc_obj_check(itf, false, -1), TAG, "cdc_obj_check failed");
ESP_LOGD(TAG, "Init CDC %d", itf);
if (cfg->cdc_class == TUSB_CLASS_CDC) {
ESP_RETURN_ON_ERROR(tusb_cdc_comm_init(itf), TAG, "tusb_cdc_comm_init failed");
cdc_obj[itf]->cdc_subclass.comm_subclass = cfg->cdc_subclass.comm_subclass;
} else {
ESP_RETURN_ON_ERROR(tusb_cdc_data_init(itf), TAG, "tusb_cdc_data_init failed");
cdc_obj[itf]->cdc_subclass.data_subclass = cfg->cdc_subclass.data_subclass;
}
cdc_obj[itf]->usb_dev = cfg->usb_dev;
return ESP_OK;
}
esp_err_t tinyusb_cdc_deinit(int itf)
{
ESP_RETURN_ON_ERROR(cdc_obj_check(itf, true, -1), TAG, "cdc_obj_check failed");
ESP_LOGD(TAG, "Deinit CDC %d", itf);
if (cdc_obj[itf]->type == TUSB_CLASS_CDC) {
ESP_RETURN_ON_ERROR(tusb_cdc_deinit_comm(itf), TAG, "tusb_cdc_deinit_comm failed");
} else if (cdc_obj[itf]->type == TUSB_CLASS_CDC_DATA) {
ESP_RETURN_ON_ERROR(tusb_cdc_deinit_data(itf), TAG, "tusb_cdc_deinit_data failed");
} else {
return ESP_ERR_INVALID_ARG;
}
return ESP_OK;
}

View File

@ -1,294 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <string.h>
#include "esp_log.h"
#include "esp_check.h"
#include "esp_err.h"
#include "descriptors_control.h"
#include "usb_descriptors.h"
#define MAX_DESC_BUF_SIZE 32 // Max length of string descriptor (can be extended, USB supports lengths up to 255 bytes)
static const char *TAG = "tusb_desc";
// =============================================================================
// STRUCTS
// =============================================================================
/**
* @brief Descriptor pointers for tinyusb descriptor requests callbacks
*
*/
typedef struct {
const tusb_desc_device_t *dev; /*!< Pointer to device descriptor */
union {
const uint8_t *cfg; /*!< Pointer to FullSpeed configuration descriptor when device one-speed only */
const uint8_t *fs_cfg; /*!< Pointer to FullSpeed configuration descriptor when device support HighSpeed */
};
#if (TUD_OPT_HIGH_SPEED)
const uint8_t *hs_cfg; /*!< Pointer to HighSpeed configuration descriptor */
const tusb_desc_device_qualifier_t *qualifier; /*!< Pointer to Qualifier descriptor */
uint8_t *other_speed; /*!< Pointer for other speed configuration descriptor */
#endif // TUD_OPT_HIGH_SPEED
const char *str[USB_STRING_DESCRIPTOR_ARRAY_SIZE]; /*!< Pointer to array of UTF-8 strings */
int str_count; /*!< Number of descriptors in str */
} tinyusb_descriptor_config_t;
static tinyusb_descriptor_config_t s_desc_cfg;
// =============================================================================
// CALLBACKS
// =============================================================================
/**
* @brief Invoked when received GET DEVICE DESCRIPTOR.
* Descriptor contents must exist long enough for transfer to complete
*
* @return Pointer to device descriptor
*/
uint8_t const *tud_descriptor_device_cb(void)
{
assert(s_desc_cfg.dev);
return (uint8_t const *)s_desc_cfg.dev;
}
/**
* @brief Invoked when received GET CONFIGURATION DESCRIPTOR.
* Descriptor contents must exist long enough for transfer to complete
*
* @param[in] index Index of required configuration
* @return Pointer to configuration descriptor
*/
uint8_t const *tud_descriptor_configuration_cb(uint8_t index)
{
(void)index; // Unused, this driver supports only 1 configuration
assert(s_desc_cfg.cfg);
#if (TUD_OPT_HIGH_SPEED)
// HINT: cfg and fs_cfg are union, no need to assert(fs_cfg)
assert(s_desc_cfg.hs_cfg);
// Return configuration descriptor based on Host speed
return (TUSB_SPEED_HIGH == tud_speed_get())
? s_desc_cfg.hs_cfg
: s_desc_cfg.fs_cfg;
#else
return s_desc_cfg.cfg;
#endif // TUD_OPT_HIGH_SPEED
}
#if (TUD_OPT_HIGH_SPEED)
/**
* @brief Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request
* Descriptor contents must exist long enough for transfer to complete
* If not highspeed capable stall this request
*/
uint8_t const *tud_descriptor_device_qualifier_cb(void)
{
assert(s_desc_cfg.qualifier);
return (uint8_t const *)s_desc_cfg.qualifier;
}
/**
* @brief Invoked when received GET OTHER SPEED CONFIGURATION DESCRIPTOR request
* Descriptor contents must exist long enough for transfer to complete
* Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa
*/
uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index)
{
assert(s_desc_cfg.other_speed);
const uint8_t *other_speed = (TUSB_SPEED_HIGH == tud_speed_get())
? s_desc_cfg.fs_cfg
: s_desc_cfg.hs_cfg;
memcpy(s_desc_cfg.other_speed,
other_speed,
((tusb_desc_configuration_t *)other_speed)->wTotalLength);
((tusb_desc_configuration_t *)s_desc_cfg.other_speed)->bDescriptorType = TUSB_DESC_OTHER_SPEED_CONFIG;
return s_desc_cfg.other_speed;
}
#endif // TUD_OPT_HIGH_SPEED
/**
* @brief Invoked when received GET STRING DESCRIPTOR request
*
* @param[in] index Index of required descriptor
* @param[in] langid Language of the descriptor
* @return Pointer to UTF-16 string descriptor
*/
uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid)
{
(void) langid; // Unused, this driver supports only one language in string descriptors
assert(s_desc_cfg.str);
uint8_t chr_count;
static uint16_t _desc_str[MAX_DESC_BUF_SIZE];
if (index == 0) {
memcpy(&_desc_str[1], s_desc_cfg.str[0], 2);
chr_count = 1;
} else {
if (index >= USB_STRING_DESCRIPTOR_ARRAY_SIZE) {
ESP_LOGW(TAG, "String index (%u) is out of bounds, check your string descriptor", index);
return NULL;
}
if (s_desc_cfg.str[index] == NULL) {
ESP_LOGW(TAG, "String index (%u) points to NULL, check your string descriptor", index);
return NULL;
}
const char *str = s_desc_cfg.str[index];
chr_count = strnlen(str, MAX_DESC_BUF_SIZE - 1); // Buffer len - header
// Convert ASCII string into UTF-16
for (uint8_t i = 0; i < chr_count; i++) {
_desc_str[1 + i] = str[i];
}
}
// First byte is length in bytes (including header), second byte is descriptor type (TUSB_DESC_STRING)
_desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2 * chr_count + 2);
return _desc_str;
}
// =============================================================================
// Driver functions
// =============================================================================
esp_err_t tinyusb_set_descriptors(const tinyusb_config_t *config)
{
esp_err_t ret = ESP_FAIL;
assert(config);
const char **pstr_desc;
// Flush descriptors control struct
memset(&s_desc_cfg, 0x00, sizeof(tinyusb_descriptor_config_t));
// Parse configuration and save descriptors's pointer
// Select Device Descriptor
if (config->device_descriptor == NULL) {
ESP_LOGW(TAG, "No Device descriptor provided, using default.");
s_desc_cfg.dev = &descriptor_dev_default;
} else {
s_desc_cfg.dev = config->device_descriptor;
}
// Select FullSpeed configuration descriptor
if (config->configuration_descriptor == NULL) {
// Default configuration descriptor is provided only for CDC, MSC and NCM classes
#if (CFG_TUD_HID > 0 || CFG_TUD_MIDI > 0 || CFG_TUD_CUSTOM_CLASS > 0 || CFG_TUD_ECM_RNDIS > 0 || CFG_TUD_DFU > 0 || CFG_TUD_DFU_RUNTIME > 0 || CFG_TUD_BTH > 0)
ESP_GOTO_ON_FALSE(config->configuration_descriptor, ESP_ERR_INVALID_ARG, fail, TAG, "Configuration descriptor must be provided for this device");
#else
ESP_LOGW(TAG, "No FullSpeed configuration descriptor provided, using default.");
s_desc_cfg.cfg = descriptor_fs_cfg_default;
#endif
} else {
s_desc_cfg.cfg = config->configuration_descriptor;
}
#if (TUD_OPT_HIGH_SPEED)
// High Speed
if (config->hs_configuration_descriptor == NULL) {
// Default configuration descriptor is provided only for CDC, MSC and NCM classes
#if (CFG_TUD_HID > 0 || CFG_TUD_MIDI > 0 || CFG_TUD_CUSTOM_CLASS > 0 || CFG_TUD_ECM_RNDIS > 0 || CFG_TUD_DFU > 0 || CFG_TUD_DFU_RUNTIME > 0 || CFG_TUD_BTH > 0)
ESP_GOTO_ON_FALSE(config->hs_configuration_descriptor, ESP_ERR_INVALID_ARG, fail, TAG, "HighSpeed configuration descriptor must be provided for this device");
#else
ESP_LOGW(TAG, "No HighSpeed configuration descriptor provided, using default.");
s_desc_cfg.hs_cfg = descriptor_hs_cfg_default;
#endif
} else {
s_desc_cfg.hs_cfg = config->hs_configuration_descriptor;
}
// HS and FS cfg desc should be equal length
ESP_GOTO_ON_FALSE(((tusb_desc_configuration_t *)s_desc_cfg.hs_cfg)->wTotalLength ==
((tusb_desc_configuration_t *)s_desc_cfg.fs_cfg)->wTotalLength,
ESP_ERR_INVALID_ARG, fail, TAG, "HighSpeed and FullSpeed configuration descriptors must be same length");
// Qualifier Descriptor
if (config->qualifier_descriptor == NULL) {
ESP_GOTO_ON_FALSE((s_desc_cfg.dev == &descriptor_dev_default), ESP_ERR_INVALID_ARG, fail, TAG, "Qualifier descriptor must be present (Device Descriptor not default).");
// Get default qualifier if device descriptor is default
ESP_LOGW(TAG, "No Qulifier descriptor provided, using default.");
s_desc_cfg.qualifier = &descriptor_qualifier_default;
} else {
s_desc_cfg.qualifier = config->qualifier_descriptor;
}
// Other Speed buffer allocate
s_desc_cfg.other_speed = calloc(1, ((tusb_desc_configuration_t *)s_desc_cfg.hs_cfg)->wTotalLength);
ESP_GOTO_ON_FALSE(s_desc_cfg.other_speed, ESP_ERR_NO_MEM, fail, TAG, "Other speed memory allocation error");
#endif // TUD_OPT_HIGH_SPEED
// Select String Descriptors and count them
if (config->string_descriptor == NULL) {
ESP_LOGW(TAG, "No String descriptors provided, using default.");
pstr_desc = descriptor_str_default;
while (descriptor_str_default[++s_desc_cfg.str_count] != NULL);
} else {
pstr_desc = config->string_descriptor;
s_desc_cfg.str_count = (config->string_descriptor_count != 0)
? config->string_descriptor_count
: 8; // '8' is for backward compatibility with esp_tinyusb v1.0.0. Do NOT remove!
}
ESP_GOTO_ON_FALSE(s_desc_cfg.str_count <= USB_STRING_DESCRIPTOR_ARRAY_SIZE, ESP_ERR_NOT_SUPPORTED, fail, TAG, "String descriptors exceed limit");
memcpy(s_desc_cfg.str, pstr_desc, s_desc_cfg.str_count * sizeof(pstr_desc[0]));
ESP_LOGI(TAG, "\n"
"┌─────────────────────────────────┐\n"
"│ USB Device Descriptor Summary │\n"
"├───────────────────┬─────────────┤\n"
"│bDeviceClass │ %-4u │\n"
"├───────────────────┼─────────────┤\n"
"│bDeviceSubClass │ %-4u │\n"
"├───────────────────┼─────────────┤\n"
"│bDeviceProtocol │ %-4u │\n"
"├───────────────────┼─────────────┤\n"
"│bMaxPacketSize0 │ %-4u │\n"
"├───────────────────┼─────────────┤\n"
"│idVendor │ %-#10x │\n"
"├───────────────────┼─────────────┤\n"
"│idProduct │ %-#10x │\n"
"├───────────────────┼─────────────┤\n"
"│bcdDevice │ %-#10x │\n"
"├───────────────────┼─────────────┤\n"
"│iManufacturer │ %-#10x │\n"
"├───────────────────┼─────────────┤\n"
"│iProduct │ %-#10x │\n"
"├───────────────────┼─────────────┤\n"
"│iSerialNumber │ %-#10x │\n"
"├───────────────────┼─────────────┤\n"
"│bNumConfigurations │ %-#10x │\n"
"└───────────────────┴─────────────┘",
s_desc_cfg.dev->bDeviceClass, s_desc_cfg.dev->bDeviceSubClass,
s_desc_cfg.dev->bDeviceProtocol, s_desc_cfg.dev->bMaxPacketSize0,
s_desc_cfg.dev->idVendor, s_desc_cfg.dev->idProduct, s_desc_cfg.dev->bcdDevice,
s_desc_cfg.dev->iManufacturer, s_desc_cfg.dev->iProduct, s_desc_cfg.dev->iSerialNumber,
s_desc_cfg.dev->bNumConfigurations);
return ESP_OK;
fail:
#if (TUD_OPT_HIGH_SPEED)
free(s_desc_cfg.other_speed);
#endif // TUD_OPT_HIGH_SPEED
return ret;
}
void tinyusb_set_str_descriptor(const char *str, int str_idx)
{
assert(str_idx < USB_STRING_DESCRIPTOR_ARRAY_SIZE);
s_desc_cfg.str[str_idx] = str;
}
void tinyusb_free_descriptors(void)
{
#if (TUD_OPT_HIGH_SPEED)
assert(s_desc_cfg.other_speed);
free(s_desc_cfg.other_speed);
#endif // TUD_OPT_HIGH_SPEED
}

View File

@ -1,14 +0,0 @@
dependencies:
idf:
version: '>=5.0'
tinyusb:
public: true
version: '>=0.14.2'
description: Espressif's additions to TinyUSB
documentation: https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/api-reference/peripherals/usb_device.html
repository: git://github.com/espressif/esp-usb.git
repository_info:
commit_sha: 4b6a798d0bed444fff48147c8dcdbbd038e92892
path: device/esp_tinyusb
url: https://github.com/espressif/esp-usb/tree/master/device/esp_tinyusb
version: 1.4.4

View File

@ -1,75 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdbool.h>
#include "esp_err.h"
#include "tusb.h"
#include "tinyusb_types.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Configuration structure of the TinyUSB core
*
* USB specification mandates self-powered devices to monitor USB VBUS to detect connection/disconnection events.
* If you want to use this feature, connected VBUS to any free GPIO through a voltage divider or voltage comparator.
* The voltage divider output should be (0.75 * Vdd) if VBUS is 4.4V (lowest valid voltage at device port).
* The comparator thresholds should be set with hysteresis: 4.35V (falling edge) and 4.75V (raising edge).
*/
typedef struct {
union {
const tusb_desc_device_t *device_descriptor; /*!< Pointer to a device descriptor. If set to NULL, the TinyUSB device will use a default device descriptor whose values are set in Kconfig */
const tusb_desc_device_t *descriptor __attribute__((deprecated)); /*!< Alias to `device_descriptor` for backward compatibility */
};
const char **string_descriptor; /*!< Pointer to array of string descriptors. If set to NULL, TinyUSB device will use a default string descriptors whose values are set in Kconfig */
int string_descriptor_count; /*!< Number of descriptors in above array */
bool external_phy; /*!< Should USB use an external PHY */
union {
struct {
const uint8_t *configuration_descriptor; /*!< Pointer to a configuration descriptor. If set to NULL, TinyUSB device will use a default configuration descriptor whose values are set in Kconfig */
};
#if (TUD_OPT_HIGH_SPEED)
struct {
const uint8_t *fs_configuration_descriptor; /*!< Pointer to a FullSpeed configuration descriptor. If set to NULL, TinyUSB device will use a default configuration descriptor whose values are set in Kconfig */
};
};
const uint8_t *hs_configuration_descriptor; /*!< Pointer to a HighSpeed configuration descriptor. If set to NULL, TinyUSB device will use a default configuration descriptor whose values are set in Kconfig */
const tusb_desc_device_qualifier_t *qualifier_descriptor; /*!< Pointer to a qualifier descriptor */
#else
};
#endif // TUD_OPT_HIGH_SPEED
bool self_powered; /*!< This is a self-powered USB device. USB VBUS must be monitored. */
int vbus_monitor_io; /*!< GPIO for VBUS monitoring. Ignored if not self_powered. */
} tinyusb_config_t;
/**
* @brief This is an all-in-one helper function, including:
* 1. USB device driver initialization
* 2. Descriptors preparation
* 3. TinyUSB stack initialization
* 4. Creates and start a task to handle usb events
*
* @note Don't change Custom descriptor, but if it has to be done,
* Suggest to define as follows in order to match the Interface Association Descriptor (IAD):
* bDeviceClass = TUSB_CLASS_MISC,
* bDeviceSubClass = MISC_SUBCLASS_COMMON,
*
* @param config tinyusb stack specific configuration
* @retval ESP_ERR_INVALID_ARG Install driver and tinyusb stack failed because of invalid argument
* @retval ESP_FAIL Install driver and tinyusb stack failed because of internal error
* @retval ESP_OK Install driver and tinyusb stack successfully
*/
esp_err_t tinyusb_driver_install(const tinyusb_config_t *config);
esp_err_t tinyusb_driver_uninstall(void);
#ifdef __cplusplus
}
#endif

View File

@ -1,99 +0,0 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#include "tinyusb_types.h"
#include "esp_err.h"
#include "sdkconfig.h"
#if (CONFIG_TINYUSB_NET_MODE_NONE != 1)
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief On receive callback type
*/
typedef esp_err_t (*tusb_net_rx_cb_t)(void *buffer, uint16_t len, void *ctx);
/**
* @brief Free Tx buffer callback type
*/
typedef void (*tusb_net_free_tx_cb_t)(void *buffer, void *ctx);
/**
* @brief On init callback type
*/
typedef void (*tusb_net_init_cb_t)(void *ctx);
/**
* @brief ESP TinyUSB NCM driver configuration structure
*/
typedef struct {
uint8_t mac_addr[6]; /*!< MAC address. Must be 6 bytes long. */
tusb_net_rx_cb_t on_recv_callback; /*!< TinyUSB receive data callbeck */
tusb_net_free_tx_cb_t free_tx_buffer; /*!< User function for freeing the Tx buffer.
* - could be NULL, if user app is responsible for freeing the buffer
* - must be used in asynchronous send mode
* - is only called if the used tinyusb_net_send...() function returns ESP_OK
* - in sync mode means that the packet was accepted by TinyUSB
* - in async mode means that the packet was queued to be processed in TinyUSB task
*/
tusb_net_init_cb_t on_init_callback; /*!< TinyUSB init network callback */
void *user_context; /*!< User context to be passed to any of the callback */
} tinyusb_net_config_t;
/**
* @brief Initialize TinyUSB NET driver
*
* @param[in] usb_dev USB device to use
* @param[in] cfg Configuration of the driver
* @return esp_err_t
*/
esp_err_t tinyusb_net_init(tinyusb_usbdev_t usb_dev, const tinyusb_net_config_t *cfg);
/**
* @brief TinyUSB NET driver send data synchronously
*
* @note It is possible to use sync and async send interchangeably.
* This function needs some synchronization primitives, so using sync mode (even once) uses more heap
*
* @param[in] buffer USB send data
* @param[in] len Send data len
* @param[in] buff_free_arg Pointer to be passed to the free_tx_buffer() callback
* @param[in] timeout Send data len
* @return ESP_OK on success == packet has been consumed by tusb and would be eventually freed
* by free_tx_buffer() callback (if non null)
* ESP_ERR_TIMEOUT on timeout
* ESP_ERR_INVALID_STATE if tusb not initialized, ESP_ERR_NO_MEM on alloc failure
*/
esp_err_t tinyusb_net_send_sync(void *buffer, uint16_t len, void *buff_free_arg, TickType_t timeout);
/**
* @brief TinyUSB NET driver send data asynchronously
*
* @note If using asynchronous sends, you must free the buffer using free_tx_buffer() callback.
* @note It is possible to use sync and async send interchangeably.
* @note Async flavor of the send is useful when the USB stack runs faster than the caller,
* since we have no control over the transmitted packets, if they get accepted or discarded.
*
* @param[in] buffer USB send data
* @param[in] len Send data len
* @param[in] buff_free_arg Pointer to be passed to the free_tx_buffer() callback
* @return ESP_OK on success == packet has been consumed by tusb and will be freed
* by free_tx_buffer() callback (if non null)
* ESP_ERR_INVALID_STATE if tusb not initialized
*/
esp_err_t tinyusb_net_send_async(void *buffer, uint16_t len, void *buff_free_arg);
#endif // (CONFIG_TINYUSB_NET_MODE_NONE != 1)
#ifdef __cplusplus
}
#endif

View File

@ -1,21 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#define USB_ESPRESSIF_VID 0x303A
typedef enum {
TINYUSB_USBDEV_0,
} tinyusb_usbdev_t;
#ifdef __cplusplus
}
#endif

View File

@ -1,206 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include "sdkconfig.h"
#include "esp_err.h"
#include "tinyusb_types.h"
#include "class/cdc/cdc.h"
#if (CONFIG_TINYUSB_CDC_ENABLED != 1)
#error "TinyUSB CDC driver must be enabled in menuconfig"
#endif
/**
* @brief CDC ports available to setup
*/
typedef enum {
TINYUSB_CDC_ACM_0 = 0x0,
TINYUSB_CDC_ACM_1,
TINYUSB_CDC_ACM_MAX
} tinyusb_cdcacm_itf_t;
/* Callbacks and events
********************************************************************* */
/**
* @brief Data provided to the input of the `callback_rx_wanted_char` callback
*/
typedef struct {
char wanted_char; /*!< Wanted character */
} cdcacm_event_rx_wanted_char_data_t;
/**
* @brief Data provided to the input of the `callback_line_state_changed` callback
*/
typedef struct {
bool dtr; /*!< Data Terminal Ready (DTR) line state */
bool rts; /*!< Request To Send (RTS) line state */
} cdcacm_event_line_state_changed_data_t;
/**
* @brief Data provided to the input of the `line_coding_changed` callback
*/
typedef struct {
cdc_line_coding_t const *p_line_coding; /*!< New line coding value */
} cdcacm_event_line_coding_changed_data_t;
/**
* @brief Types of CDC ACM events
*/
typedef enum {
CDC_EVENT_RX,
CDC_EVENT_RX_WANTED_CHAR,
CDC_EVENT_LINE_STATE_CHANGED,
CDC_EVENT_LINE_CODING_CHANGED
} cdcacm_event_type_t;
/**
* @brief Describes an event passing to the input of a callbacks
*/
typedef struct {
cdcacm_event_type_t type; /*!< Event type */
union {
cdcacm_event_rx_wanted_char_data_t rx_wanted_char_data; /*!< Data input of the `callback_rx_wanted_char` callback */
cdcacm_event_line_state_changed_data_t line_state_changed_data; /*!< Data input of the `callback_line_state_changed` callback */
cdcacm_event_line_coding_changed_data_t line_coding_changed_data; /*!< Data input of the `line_coding_changed` callback */
};
} cdcacm_event_t;
/**
* @brief CDC-ACM callback type
*/
typedef void(*tusb_cdcacm_callback_t)(int itf, cdcacm_event_t *event);
/*********************************************************************** Callbacks and events*/
/* Other structs
********************************************************************* */
/**
* @brief Configuration structure for CDC-ACM
*/
typedef struct {
tinyusb_usbdev_t usb_dev; /*!< Usb device to set up */
tinyusb_cdcacm_itf_t cdc_port; /*!< CDC port */
size_t rx_unread_buf_sz __attribute__((deprecated("This parameter is not used any more. Configure RX buffer in menuconfig.")));
tusb_cdcacm_callback_t callback_rx; /*!< Pointer to the function with the `tusb_cdcacm_callback_t` type that will be handled as a callback */
tusb_cdcacm_callback_t callback_rx_wanted_char; /*!< Pointer to the function with the `tusb_cdcacm_callback_t` type that will be handled as a callback */
tusb_cdcacm_callback_t callback_line_state_changed; /*!< Pointer to the function with the `tusb_cdcacm_callback_t` type that will be handled as a callback */
tusb_cdcacm_callback_t callback_line_coding_changed; /*!< Pointer to the function with the `tusb_cdcacm_callback_t` type that will be handled as a callback */
} tinyusb_config_cdcacm_t;
/*********************************************************************** Other structs*/
/* Public functions
********************************************************************* */
/**
* @brief Initialize CDC ACM. Initialization will be finished with
* the `tud_cdc_line_state_cb` callback
*
* @param[in] cfg Configuration structure
* @return esp_err_t
*/
esp_err_t tusb_cdc_acm_init(const tinyusb_config_cdcacm_t *cfg);
/**
* @brief De-initialize CDC ACM.
*
* @param[in] itf Index of CDC interface
* @return esp_err_t
*/
esp_err_t tusb_cdc_acm_deinit(int itf);
/**
* @brief Register a callback invoking on CDC event. If the callback had been
* already registered, it will be overwritten
*
* @param[in] itf Index of CDC interface
* @param[in] event_type Type of registered event for a callback
* @param[in] callback Callback function
* @return esp_err_t - ESP_OK or ESP_ERR_INVALID_ARG
*/
esp_err_t tinyusb_cdcacm_register_callback(tinyusb_cdcacm_itf_t itf,
cdcacm_event_type_t event_type,
tusb_cdcacm_callback_t callback);
/**
* @brief Unregister a callback invoking on CDC event
*
* @param[in] itf Index of CDC interface
* @param[in] event_type Type of registered event for a callback
* @return esp_err_t - ESP_OK or ESP_ERR_INVALID_ARG
*/
esp_err_t tinyusb_cdcacm_unregister_callback(tinyusb_cdcacm_itf_t itf, cdcacm_event_type_t event_type);
/**
* @brief Sent one character to a write buffer
*
* @param[in] itf Index of CDC interface
* @param[in] ch Character to send
* @return size_t - amount of queued bytes
*/
size_t tinyusb_cdcacm_write_queue_char(tinyusb_cdcacm_itf_t itf, char ch);
/**
* @brief Write data to write buffer
*
* @param[in] itf Index of CDC interface
* @param[in] in_buf Data
* @param[in] in_size Data size in bytes
* @return size_t - amount of queued bytes
*/
size_t tinyusb_cdcacm_write_queue(tinyusb_cdcacm_itf_t itf, const uint8_t *in_buf, size_t in_size);
/**
* @brief Flush data in write buffer of CDC interface
*
* Use `tinyusb_cdcacm_write_queue` to add data to the buffer
*
* WARNING! TinyUSB can block output Endpoint for several RX callbacks, after will do additional flush
* after the each transfer. That can leads to the situation when you requested a flush, but it will fail until
* one of the next callbacks ends.
* SO USING OF THE FLUSH WITH TIMEOUTS IN CALLBACKS IS NOT RECOMMENDED - YOU CAN GET A LOCK FOR THE TIMEOUT
*
* @param[in] itf Index of CDC interface
* @param[in] timeout_ticks Transfer timeout. Set to zero for non-blocking mode
* @return - ESP_OK All data flushed
* - ESP_ERR_TIMEOUT Time out occurred in blocking mode
* - ESP_NOT_FINISHED The transfer is still in progress in non-blocking mode
*/
esp_err_t tinyusb_cdcacm_write_flush(tinyusb_cdcacm_itf_t itf, uint32_t timeout_ticks);
/**
* @brief Receive data from CDC interface
*
* @param[in] itf Index of CDC interface
* @param[out] out_buf Data buffer
* @param[in] out_buf_sz Data buffer size in bytes
* @param[out] rx_data_size Number of bytes written to out_buf
* @return esp_err_t ESP_OK, ESP_FAIL or ESP_ERR_INVALID_STATE
*/
esp_err_t tinyusb_cdcacm_read(tinyusb_cdcacm_itf_t itf, uint8_t *out_buf, size_t out_buf_sz, size_t *rx_data_size);
/**
* @brief Check if the CDC interface is initialized
*
* @param[in] itf Index of CDC interface
* @return - true Initialized
* - false Not Initialized
*/
bool tusb_cdc_acm_initialized(tinyusb_cdcacm_itf_t itf);
/*********************************************************************** Public functions*/
#ifdef __cplusplus
}
#endif

View File

@ -1,155 +0,0 @@
/*
* SPDX-FileCopyrightText: 2019 Ha Thach (tinyusb.org),
* SPDX-FileContributor: 2020 Espressif Systems (Shanghai) CO LTD
* SPDX-License-Identifier: MIT
*
* Copyright (c) 2019 Ha Thach (tinyusb.org),
* Additions Copyright (c) 2020, Espressif Systems (Shanghai) PTE LTD
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
*/
#pragma once
#include "tusb_option.h"
#include "sdkconfig.h"
#ifdef __cplusplus
extern "C" {
#endif
#ifndef CONFIG_TINYUSB_CDC_ENABLED
# define CONFIG_TINYUSB_CDC_ENABLED 0
#endif
#ifndef CONFIG_TINYUSB_CDC_COUNT
# define CONFIG_TINYUSB_CDC_COUNT 0
#endif
#ifndef CONFIG_TINYUSB_MSC_ENABLED
# define CONFIG_TINYUSB_MSC_ENABLED 0
#endif
#ifndef CONFIG_TINYUSB_HID_COUNT
# define CONFIG_TINYUSB_HID_COUNT 0
#endif
#ifndef CONFIG_TINYUSB_MIDI_COUNT
# define CONFIG_TINYUSB_MIDI_COUNT 0
#endif
#ifndef CONFIG_TINYUSB_CUSTOM_CLASS_ENABLED
# define CONFIG_TINYUSB_CUSTOM_CLASS_ENABLED 0
#endif
#ifndef CONFIG_TINYUSB_NET_MODE_ECM_RNDIS
# define CONFIG_TINYUSB_NET_MODE_ECM_RNDIS 0
#endif
#ifndef CONFIG_TINYUSB_NET_MODE_NCM
# define CONFIG_TINYUSB_NET_MODE_NCM 0
#endif
#ifndef CONFIG_TINYUSB_DFU_MODE_DFU
# define CONFIG_TINYUSB_DFU_MODE_DFU 0
#endif
#ifndef CONFIG_TINYUSB_DFU_MODE_DFU_RUNTIME
# define CONFIG_TINYUSB_DFU_MODE_DFU_RUNTIME 0
#endif
#ifndef CONFIG_TINYUSB_BTH_ENABLED
# define CONFIG_TINYUSB_BTH_ENABLED 0
# define CONFIG_TINYUSB_BTH_ISO_ALT_COUNT 0
#endif
#ifndef CONFIG_TINYUSB_DEBUG_LEVEL
# define CONFIG_TINYUSB_DEBUG_LEVEL 0
#endif
#ifdef CONFIG_TINYUSB_RHPORT_HS
# define CFG_TUSB_RHPORT1_MODE OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED
#else
# define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE | OPT_MODE_FULL_SPEED
#endif
#define CFG_TUSB_OS OPT_OS_FREERTOS
/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
* Tinyusb use follows macros to declare transferring memory so that they can be put
* into those specific section.
* e.g
* - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
* - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4)))
*/
#ifndef CFG_TUSB_MEM_SECTION
# define CFG_TUSB_MEM_SECTION
#endif
#ifndef CFG_TUSB_MEM_ALIGN
# define CFG_TUSB_MEM_ALIGN TU_ATTR_ALIGNED(4)
#endif
#ifndef CFG_TUD_ENDPOINT0_SIZE
#define CFG_TUD_ENDPOINT0_SIZE 64
#endif
// Debug Level
#define CFG_TUSB_DEBUG CONFIG_TINYUSB_DEBUG_LEVEL
// CDC FIFO size of TX and RX
#define CFG_TUD_CDC_RX_BUFSIZE CONFIG_TINYUSB_CDC_RX_BUFSIZE
#define CFG_TUD_CDC_TX_BUFSIZE CONFIG_TINYUSB_CDC_TX_BUFSIZE
// MSC Buffer size of Device Mass storage
#define CFG_TUD_MSC_BUFSIZE CONFIG_TINYUSB_MSC_BUFSIZE
// MIDI macros
#define CFG_TUD_MIDI_EP_BUFSIZE 64
#define CFG_TUD_MIDI_EPSIZE CFG_TUD_MIDI_EP_BUFSIZE
#define CFG_TUD_MIDI_RX_BUFSIZE 64
#define CFG_TUD_MIDI_TX_BUFSIZE 64
// Vendor FIFO size of TX and RX
// If not configured vendor endpoints will not be buffered
#define CFG_TUD_VENDOR_RX_BUFSIZE 64
#define CFG_TUD_VENDOR_TX_BUFSIZE 64
// DFU macros
#define CFG_TUD_DFU_XFER_BUFSIZE CONFIG_TINYUSB_DFU_BUFSIZE
// Number of BTH ISO alternatives
#define CFG_TUD_BTH_ISO_ALT_COUNT CONFIG_TINYUSB_BTH_ISO_ALT_COUNT
// Enabled device class driver
#define CFG_TUD_CDC CONFIG_TINYUSB_CDC_COUNT
#define CFG_TUD_MSC CONFIG_TINYUSB_MSC_ENABLED
#define CFG_TUD_HID CONFIG_TINYUSB_HID_COUNT
#define CFG_TUD_MIDI CONFIG_TINYUSB_MIDI_COUNT
#define CFG_TUD_CUSTOM_CLASS CONFIG_TINYUSB_CUSTOM_CLASS_ENABLED
#define CFG_TUD_ECM_RNDIS CONFIG_TINYUSB_NET_MODE_ECM_RNDIS
#define CFG_TUD_NCM CONFIG_TINYUSB_NET_MODE_NCM
#define CFG_TUD_DFU CONFIG_TINYUSB_DFU_MODE_DFU
#define CFG_TUD_DFU_RUNTIME CONFIG_TINYUSB_DFU_MODE_DFU_RUNTIME
#define CFG_TUD_BTH CONFIG_TINYUSB_BTH_ENABLED
#ifdef __cplusplus
}
#endif

View File

@ -1,33 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include "esp_err.h"
/**
* @brief Redirect output to the USB serial
* @param cdc_intf - interface number of TinyUSB's CDC
*
* @return esp_err_t - ESP_OK, ESP_FAIL or an error code
*/
esp_err_t esp_tusb_init_console(int cdc_intf);
/**
* @brief Switch log to the default output
* @param cdc_intf - interface number of TinyUSB's CDC
*
* @return esp_err_t
*/
esp_err_t esp_tusb_deinit_console(int cdc_intf);
#ifdef __cplusplus
}
#endif

View File

@ -1,188 +0,0 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stddef.h>
#include "esp_err.h"
#include "wear_levelling.h"
#include "esp_vfs_fat.h"
#if SOC_SDMMC_HOST_SUPPORTED
#include "driver/sdmmc_host.h"
#endif
/**
* @brief Data provided to the input of the `callback_mount_changed` and `callback_premount_changed` callback
*/
typedef struct {
bool is_mounted; /*!< Flag if storage is mounted or not */
} tinyusb_msc_event_mount_changed_data_t;
/**
* @brief Types of MSC events
*/
typedef enum {
TINYUSB_MSC_EVENT_MOUNT_CHANGED, /*!< Event type AFTER mount/unmount operation is successfully finished */
TINYUSB_MSC_EVENT_PREMOUNT_CHANGED /*!< Event type BEFORE mount/unmount operation is started */
} tinyusb_msc_event_type_t;
/**
* @brief Describes an event passing to the input of a callbacks
*/
typedef struct {
tinyusb_msc_event_type_t type; /*!< Event type */
union {
tinyusb_msc_event_mount_changed_data_t mount_changed_data; /*!< Data input of the callback */
};
} tinyusb_msc_event_t;
/**
* @brief MSC callback that is delivered whenever a specific event occurs.
*/
typedef void(*tusb_msc_callback_t)(tinyusb_msc_event_t *event);
#if SOC_SDMMC_HOST_SUPPORTED
/**
* @brief Configuration structure for sdmmc initialization
*
* User configurable parameters that are used while
* initializing the sdmmc media.
*/
typedef struct {
sdmmc_card_t *card; /*!< Pointer to sdmmc card configuration structure */
tusb_msc_callback_t callback_mount_changed; /*!< Pointer to the function callback that will be delivered AFTER mount/unmount operation is successfully finished */
tusb_msc_callback_t callback_premount_changed; /*!< Pointer to the function callback that will be delivered BEFORE mount/unmount operation is started */
const esp_vfs_fat_mount_config_t mount_config; /*!< FATFS mount config */
} tinyusb_msc_sdmmc_config_t;
#endif
/**
* @brief Configuration structure for spiflash initialization
*
* User configurable parameters that are used while
* initializing the SPI Flash media.
*/
typedef struct {
wl_handle_t wl_handle; /*!< Pointer to spiflash wera-levelling handle */
tusb_msc_callback_t callback_mount_changed; /*!< Pointer to the function callback that will be delivered AFTER mount/unmount operation is successfully finished */
tusb_msc_callback_t callback_premount_changed; /*!< Pointer to the function callback that will be delivered BEFORE mount/unmount operation is started */
const esp_vfs_fat_mount_config_t mount_config; /*!< FATFS mount config */
} tinyusb_msc_spiflash_config_t;
/**
* @brief Register storage type spiflash with tinyusb driver
*
* @param config pointer to the spiflash configuration
* @return esp_err_t
* - ESP_OK, if success;
* - ESP_ERR_NO_MEM, if there was no memory to allocate storage components;
*/
esp_err_t tinyusb_msc_storage_init_spiflash(const tinyusb_msc_spiflash_config_t *config);
#if SOC_SDMMC_HOST_SUPPORTED
/**
* @brief Register storage type sd-card with tinyusb driver
*
* @param config pointer to the sd card configuration
* @return esp_err_t
* - ESP_OK, if success;
* - ESP_ERR_NO_MEM, if there was no memory to allocate storage components;
*/
esp_err_t tinyusb_msc_storage_init_sdmmc(const tinyusb_msc_sdmmc_config_t *config);
#endif
/**
* @brief Deregister storage with tinyusb driver and frees the memory
*
*/
void tinyusb_msc_storage_deinit(void);
/**
* @brief Register a callback invoking on MSC event. If the callback had been
* already registered, it will be overwritten
*
* @param event_type - type of registered event for a callback
* @param callback - callback function
* @return esp_err_t - ESP_OK or ESP_ERR_INVALID_ARG
*/
esp_err_t tinyusb_msc_register_callback(tinyusb_msc_event_type_t event_type,
tusb_msc_callback_t callback);
/**
* @brief Unregister a callback invoking on MSC event.
*
* @param event_type - type of registered event for a callback
* @return esp_err_t - ESP_OK or ESP_ERR_INVALID_ARG
*/
esp_err_t tinyusb_msc_unregister_callback(tinyusb_msc_event_type_t event_type);
/**
* @brief Mount the storage partition locally on the firmware application.
*
* Get the available drive number. Register spi flash partition.
* Connect POSIX and C standard library IO function with FATFS.
* Mounts the partition.
* This API is used by the firmware application. If the storage partition is
* mounted by this API, host (PC) can't access the storage via MSC.
* When this function is called from the tinyusb callback functions, care must be taken
* so as to make sure that user callbacks must be completed within a
* specific time. Otherwise, MSC device may re-appear again on Host.
*
* @param base_path path prefix where FATFS should be registered
* @return esp_err_t
* - ESP_OK, if success;
* - ESP_ERR_NOT_FOUND if the maximum count of volumes is already mounted
* - ESP_ERR_NO_MEM if not enough memory or too many VFSes already registered;
*/
esp_err_t tinyusb_msc_storage_mount(const char *base_path);
/**
* @brief Unmount the storage partition from the firmware application.
*
* Unmount the partition. Unregister diskio driver.
* Unregister the SPI flash partition.
* Finally, Un-register FATFS from VFS.
* After this function is called, storage device can be seen (recognized) by host (PC).
* When this function is called from the tinyusb callback functions, care must be taken
* so as to make sure that user callbacks must be completed within a specific time.
* Otherwise, MSC device may not appear on Host.
*
* @return esp_err_t
* - ESP_OK on success
* - ESP_ERR_INVALID_STATE if FATFS is not registered in VFS
*/
esp_err_t tinyusb_msc_storage_unmount(void);
/**
* @brief Get number of sectors in storage media
*
* @return usable size, in bytes
*/
uint32_t tinyusb_msc_storage_get_sector_count(void);
/**
* @brief Get sector size of storage media
*
* @return sector count
*/
uint32_t tinyusb_msc_storage_get_sector_size(void);
/**
* @brief Get status if storage media is exposed over USB to Host
*
* @return bool
* - true, if the storage media is exposed to Host
* - false, if the stoarge media is mounted on application (not exposed to Host)
*/
bool tinyusb_msc_storage_in_use_by_usb_host(void);
#ifdef __cplusplus
}
#endif

View File

@ -1,39 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "esp_err.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief This helper function creates and starts a task which wraps `tud_task()`.
*
* The wrapper function basically wraps tud_task and some log.
* Default parameters: stack size and priority as configured, argument = NULL, not pinned to any core.
* If you have more requirements for this task, you can create your own task which calls tud_task as the last step.
*
* @retval ESP_OK run tinyusb main task successfully
* @retval ESP_FAIL run tinyusb main task failed of internal error or initialization within the task failed when TINYUSB_INIT_IN_DEFAULT_TASK=y
* @retval ESP_FAIL initialization within the task failed if CONFIG_TINYUSB_INIT_IN_DEFAULT_TASK is enabled
* @retval ESP_ERR_INVALID_STATE tinyusb main task has been created before
*/
esp_err_t tusb_run_task(void);
/**
* @brief This helper function stops and destroys the task created by `tusb_run_task()`
*
* @retval ESP_OK stop and destroy tinyusb main task successfully
* @retval ESP_ERR_INVALID_STATE tinyusb main task hasn't been created yet
*/
esp_err_t tusb_stop_task(void);
#ifdef __cplusplus
}
#endif

View File

@ -1,69 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "esp_err.h"
#include "esp_vfs_common.h" // For esp_line_endings_t definitions
#ifdef __cplusplus
extern "C" {
#endif
#define VFS_TUSB_MAX_PATH 16
#define VFS_TUSB_PATH_DEFAULT "/dev/tusb_cdc"
/**
* @brief Register TinyUSB CDC at VFS with path
*
* Know limitation:
* In case there are multiple CDC interfaces in the system, only one of them can be registered to VFS.
*
* @param[in] cdc_intf Interface number of TinyUSB's CDC
* @param[in] path Path where the CDC will be registered, `/dev/tusb_cdc` will be used if left NULL.
* @return esp_err_t ESP_OK or ESP_FAIL
*/
esp_err_t esp_vfs_tusb_cdc_register(int cdc_intf, char const *path);
/**
* @brief Unregister TinyUSB CDC from VFS
*
* @param[in] path Path where the CDC will be unregistered if NULL will be used `/dev/tusb_cdc`
* @return esp_err_t ESP_OK or ESP_FAIL
*/
esp_err_t esp_vfs_tusb_cdc_unregister(char const *path);
/**
* @brief Set the line endings to sent
*
* This specifies the conversion between newlines ('\n', LF) on stdout and line
* endings sent:
*
* - ESP_LINE_ENDINGS_CRLF: convert LF to CRLF
* - ESP_LINE_ENDINGS_CR: convert LF to CR
* - ESP_LINE_ENDINGS_LF: no modification
*
* @param[in] mode line endings to send
*/
void esp_vfs_tusb_cdc_set_tx_line_endings(esp_line_endings_t mode);
/**
* @brief Set the line endings expected to be received
*
* This specifies the conversion between line endings received and
* newlines ('\n', LF) passed into stdin:
*
* - ESP_LINE_ENDINGS_CRLF: convert CRLF to LF
* - ESP_LINE_ENDINGS_CR: convert CR to LF
* - ESP_LINE_ENDINGS_LF: no modification
*
* @param[in] mode line endings expected
*/
void esp_vfs_tusb_cdc_set_rx_line_endings(esp_line_endings_t mode);
#ifdef __cplusplus
}
#endif

View File

@ -1,82 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include "freertos/FreeRTOS.h"
#include "freertos/semphr.h"
#include "freertos/timers.h"
#include "tusb.h"
#include "tinyusb_types.h"
/* CDC classification
********************************************************************* */
typedef enum {
TINYUSB_CDC_DATA = 0x00,
} cdc_data_sublcass_type_t; // CDC120 specification
/* Note:other classification is represented in the file components\tinyusb\tinyusb\src\class\cdc\cdc.h */
/*********************************************************************** CDC classification*/
/* Structs
********************************************************************* */
typedef struct {
tinyusb_usbdev_t usb_dev; /*!< USB device to set up */
tusb_class_code_t cdc_class; /*!< CDC device class : Communications or Data device */
union {
cdc_comm_sublcass_type_t comm_subclass; /*!< Communications device subclasses: ACM, ECM, etc. */
cdc_data_sublcass_type_t data_subclass; /*!< Data device has only one subclass.*/
} cdc_subclass; /*!< CDC device subclass according to Class Definitions for Communications Devices the CDC v.1.20 */
} tinyusb_config_cdc_t; /*!< Main configuration structure of a CDC device */
typedef struct {
tinyusb_usbdev_t usb_dev; /*!< USB device used for the instance */
tusb_class_code_t type;
union {
cdc_comm_sublcass_type_t comm_subclass; /*!< Communications device subclasses: ACM, ECM, etc. */
cdc_data_sublcass_type_t data_subclass; /*!< Data device has only one subclass.*/
} cdc_subclass; /*!< CDC device subclass according to Class Definitions for Communications Devices the CDC v.1.20 */
void *subclass_obj; /*!< Dynamically allocated subclass specific object */
} esp_tusb_cdc_t;
/*********************************************************************** Structs*/
/* Functions
********************************************************************* */
/**
* @brief Initializing CDC basic object
* @param itf - number of a CDC object
* @param cfg - CDC configuration structure
*
* @return esp_err_t ESP_OK or ESP_FAIL
*/
esp_err_t tinyusb_cdc_init(int itf, const tinyusb_config_cdc_t *cfg);
/**
* @brief De-initializing CDC. Clean its objects
* @param itf - number of a CDC object
* @return esp_err_t ESP_OK, ESP_ERR_INVALID_ARG, ESP_ERR_INVALID_STATE
*
*/
esp_err_t tinyusb_cdc_deinit(int itf);
/**
* @brief Return interface of a CDC device
*
* @param itf_num
* @return esp_tusb_cdc_t* pointer to the interface or (NULL) on error
*/
esp_tusb_cdc_t *tinyusb_cdc_get_intf(int itf_num);
/*********************************************************************** Functions*/
#ifdef __cplusplus
}
#endif

View File

@ -1,47 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "tinyusb.h"
#ifdef __cplusplus
extern "C" {
#endif
#define USB_STRING_DESCRIPTOR_ARRAY_SIZE 8 // Max 8 string descriptors for a device. LANGID, Manufacturer, Product, Serial number + 4 user defined
/**
* @brief Parse tinyusb configuration and prepare the device configuration pointer list to configure tinyusb driver
*
* @attention All descriptors passed to this function must exist for the duration of USB device lifetime
*
* @param[in] config tinyusb stack specific configuration
* @retval ESP_ERR_INVALID_ARG Default configuration descriptor is provided only for CDC, MSC and NCM classes
* @retval ESP_ERR_NO_MEM Memory allocation error
* @retval ESP_OK Descriptors configured without error
*/
esp_err_t tinyusb_set_descriptors(const tinyusb_config_t *config);
/**
* @brief Set specific string descriptor
*
* @attention The descriptor passed to this function must exist for the duration of USB device lifetime
*
* @param[in] str UTF-8 string
* @param[in] str_idx String descriptor index
*/
void tinyusb_set_str_descriptor(const char *str, int str_idx);
/**
* @brief Free memory allocated during tinyusb_set_descriptors
*
*/
void tinyusb_free_descriptors(void);
#ifdef __cplusplus
}
#endif

View File

@ -1,62 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "tusb.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Device descriptor generated from Kconfig
*
* This descriptor is used by default.
* The user can provide their own device descriptor via tinyusb_driver_install() call
*/
extern const tusb_desc_device_t descriptor_dev_default;
#if (TUD_OPT_HIGH_SPEED)
/**
* @brief Qualifier Device descriptor generated from Kconfig
*
* This descriptor is used by default.
* The user can provide their own descriptor via tinyusb_driver_install() call
*/
extern const tusb_desc_device_qualifier_t descriptor_qualifier_default;
#endif // TUD_OPT_HIGH_SPEED
/**
* @brief Array of string descriptors generated from Kconfig
*
* This descriptor is used by default.
* The user can provide their own descriptor via tinyusb_driver_install() call
*/
extern const char *descriptor_str_default[];
/**
* @brief FullSpeed configuration descriptor generated from Kconfig
* This descriptor is used by default.
* The user can provide their own FullSpeed configuration descriptor via tinyusb_driver_install() call
*/
extern const uint8_t descriptor_fs_cfg_default[];
#if (TUD_OPT_HIGH_SPEED)
/**
* @brief HighSpeed Configuration descriptor generated from Kconfig
*
* This descriptor is used by default.
* The user can provide their own HighSpeed configuration descriptor via tinyusb_driver_install() call
*/
extern const uint8_t descriptor_hs_cfg_default[];
#endif // TUD_OPT_HIGH_SPEED
uint8_t tusb_get_mac_string_id(void);
#ifdef __cplusplus
}
#endif

View File

@ -1,2 +0,0 @@
supplier: 'Organization: Espressif Systems (Shanghai) CO LTD'
originator: 'Organization: Espressif Systems (Shanghai) CO LTD'

View File

@ -1,8 +0,0 @@
cmake_minimum_required(VERSION 3.22)
project(libusb_test
LANGUAGES C
)
add_executable(libusb_test libusb_test.c)
target_link_libraries(libusb_test -lusb-1.0)

View File

@ -1,121 +0,0 @@
/*
* SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <assert.h>
#include <stdio.h>
#include <libusb-1.0/libusb.h>
#define TINYUSB_VENDOR 0x303A
#define TINYUSB_PRODUCT 0x4002
#define DESC_TYPE_DEVICE_QUALIFIER 0x06
#define DESC_TYOE_OTHER_SPEED_CONFIG 0x07
// Buffer for descriptor data
unsigned char buffer[512] = { 0 };
// USB Other Speed Configuration Descriptor
typedef struct __attribute__ ((packed))
{
uint8_t bLength ; ///< Size of descriptor
uint8_t bDescriptorType ; ///< Other_speed_Configuration Type
uint16_t wTotalLength ; ///< Total length of data returned
uint8_t bNumInterfaces ; ///< Number of interfaces supported by this speed configuration
uint8_t bConfigurationValue ; ///< Value to use to select configuration
uint8_t iConfiguration ; ///< Index of string descriptor
uint8_t bmAttributes ; ///< Same as Configuration descriptor
uint8_t bMaxPower ; ///< Same as Configuration descriptor
} desc_other_speed_t;
// USB Device Qualifier Descriptor
typedef struct __attribute__ ((packed))
{
uint8_t bLength ; ///< Size of descriptor
uint8_t bDescriptorType ; ///< Device Qualifier Type
uint16_t bcdUSB ; ///< USB specification version number (e.g., 0200H for V2.00)
uint8_t bDeviceClass ; ///< Class Code
uint8_t bDeviceSubClass ; ///< SubClass Code
uint8_t bDeviceProtocol ; ///< Protocol Code
uint8_t bMaxPacketSize0 ; ///< Maximum packet size for other speed
uint8_t bNumConfigurations ; ///< Number of Other-speed Configurations
uint8_t bReserved ; ///< Reserved for future use, must be zero
} desc_device_qualifier_t;
// printf helpers
static void _print_device_qulifier_desc(unsigned char *buffer, int length);
static void _print_other_speed_desc(unsigned char *buffer, int length);
//
// MAIN
//
int main()
{
libusb_context *context = NULL;
int rc = 0;
rc = libusb_init(&context);
assert(rc == 0);
libusb_device_handle *dev_handle = libusb_open_device_with_vid_pid(context,
TINYUSB_VENDOR,
TINYUSB_PRODUCT);
if (dev_handle != NULL) {
printf("TinyUSB Device has been found\n");
// Test Qualifier Descriprtor
// 1. Get Qualifier Descriptor
// 2. print descriptor data
rc = libusb_get_descriptor(dev_handle, DESC_TYPE_DEVICE_QUALIFIER, 0, buffer, 512);
_print_device_qulifier_desc(buffer, rc);
// Test Other Speed Descriptor
// 1. Get Other Speed Descriptor
// 2. print descriptor data
rc = libusb_get_descriptor(dev_handle, DESC_TYOE_OTHER_SPEED_CONFIG, 0, buffer, 512);
_print_other_speed_desc(buffer, rc);
libusb_close(dev_handle);
} else {
printf("TinyUSB Device has NOT been found\n");
}
libusb_exit(context);
}
// =============================================================================
static void _print_device_qulifier_desc(unsigned char *buffer, int length)
{
assert(buffer);
desc_device_qualifier_t *qualifier_desc = (desc_device_qualifier_t *) buffer;
printf("========= Device Qualifier ========== \n");
printf("\t bLength: %d \n", qualifier_desc->bLength);
printf("\t bDescriptorType: %d (%#x)\n", qualifier_desc->bDescriptorType, qualifier_desc->bDescriptorType);
printf("\t bcdUSB: %d (%#x) \n", qualifier_desc->bcdUSB, qualifier_desc->bcdUSB);
printf("\t bDeviceClass: %d (%#x) \n", qualifier_desc->bDeviceClass, qualifier_desc->bDeviceClass);
printf("\t bDeviceSubClass: %d \n", qualifier_desc->bDeviceSubClass);
printf("\t bDeviceProtocol: %d \n", qualifier_desc->bDeviceProtocol);
printf("\t bMaxPacketSize0: %d \n", qualifier_desc->bMaxPacketSize0);
printf("\t bNumConfigurations: %d \n", qualifier_desc->bNumConfigurations);
}
static void _print_other_speed_desc(unsigned char *buffer, int length)
{
assert(buffer);
desc_other_speed_t *other_speed = (desc_other_speed_t *) buffer;
printf("============ Other Speed ============ \n");
printf("\t bLength: %d \n", other_speed->bLength);
printf("\t bDescriptorType: %d (%#x) \n", other_speed->bDescriptorType, other_speed->bDescriptorType);
printf("\t wTotalLength: %d \n", other_speed->wTotalLength);
printf("\t bNumInterfaces: %d \n", other_speed->bNumInterfaces);
printf("\t bConfigurationValue: %d \n", other_speed->bConfigurationValue);
printf("\t iConfiguration: %d \n", other_speed->iConfiguration);
printf("\t bmAttributes: %d (%#x) \n", other_speed->bmAttributes, other_speed->bmAttributes);
printf("\t bMaxPower: %d (%#x) \n", other_speed->bMaxPower, other_speed->bMaxPower);
}

View File

@ -1,11 +0,0 @@
# The following lines of boilerplate have to be in your project's
# CMakeLists in this exact order for cmake to work correctly
cmake_minimum_required(VERSION 3.16)
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
# Set the components to include the tests for.
set(EXTRA_COMPONENT_DIRS
../
)
project(test_app_usb_device_esp_tinyusb)

View File

@ -1,4 +0,0 @@
| Supported Targets | ESP32-S2 | ESP32-S3 |
| ----------------- | -------- | -------- |
# USB: esp_tinyusb test application

View File

@ -1,6 +0,0 @@
include($ENV{IDF_PATH}/tools/cmake/version.cmake)
idf_component_register(SRC_DIRS .
INCLUDE_DIRS .
REQUIRES unity esp_tinyusb
WHOLE_ARCHIVE)

View File

@ -1,7 +0,0 @@
## IDF Component Manager Manifest File
dependencies:
espressif/esp_tinyusb:
version: "*"
override_path: "../../"
rules:
- if: "idf_version >= 5.0"

View File

@ -1,57 +0,0 @@
/*
* SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdio.h>
#include <string.h>
#include "unity.h"
#include "esp_heap_caps.h"
static size_t before_free_8bit;
static size_t before_free_32bit;
#define TEST_MEMORY_LEAK_THRESHOLD (-530)
static void check_leak(size_t before_free, size_t after_free, const char *type)
{
ssize_t delta = after_free - before_free;
printf("MALLOC_CAP_%s: Before %u bytes free, After %u bytes free (delta %d)\n", type, before_free, after_free, delta);
TEST_ASSERT_MESSAGE(delta >= TEST_MEMORY_LEAK_THRESHOLD, "memory leak");
}
void app_main(void)
{
// ____ ___ ___________________ __ __
// | | \/ _____/\______ \ _/ |_ ____ _______/ |_
// | | /\_____ \ | | _/ \ __\/ __ \ / ___/\ __\.
// | | / / \ | | \ | | \ ___/ \___ \ | |
// |______/ /_______ / |______ / |__| \___ >____ > |__|
// \/ \/ \/ \/
printf(" ____ ___ ___________________ __ __ \r\n");
printf("| | \\/ _____/\\______ \\ _/ |_ ____ _______/ |_ \r\n");
printf("| | /\\_____ \\ | | _/ \\ __\\/ __ \\ / ___/\\ __\\\r\n");
printf("| | / / \\ | | \\ | | \\ ___/ \\___ \\ | | \r\n");
printf("|______/ /_______ / |______ / |__| \\___ >____ > |__| \r\n");
printf(" \\/ \\/ \\/ \\/ \r\n");
UNITY_BEGIN();
unity_run_menu();
UNITY_END();
}
/* setUp runs before every test */
void setUp(void)
{
before_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
before_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
}
/* tearDown runs after every test */
void tearDown(void)
{
size_t after_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
size_t after_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
check_leak(before_free_8bit, after_free_8bit, "8BIT");
check_leak(before_free_32bit, after_free_32bit, "32BIT");
}

View File

@ -1,103 +0,0 @@
/*
* SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "soc/soc_caps.h"
#if SOC_USB_OTG_SUPPORTED
#include <stdio.h>
#include <string.h>
#include "esp_system.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_log.h"
#include "esp_err.h"
#include "driver/gpio.h"
#include "esp_rom_gpio.h"
#include "soc/gpio_sig_map.h"
#include "unity.h"
#include "tinyusb.h"
#include "tusb_tasks.h"
#define DEVICE_DETACH_TEST_ROUNDS 10
#define DEVICE_DETACH_ROUND_DELAY_MS 1000
#if (CONFIG_IDF_TARGET_ESP32P4)
#define USB_SRP_BVALID_IN_IDX USB_SRP_BVALID_PAD_IN_IDX
#endif // CONFIG_IDF_TARGET_ESP32P4
/* TinyUSB descriptors
********************************************************************* */
#define TUSB_DESC_TOTAL_LEN (TUD_CONFIG_DESC_LEN)
static unsigned int dev_mounted = 0;
static unsigned int dev_umounted = 0;
static uint8_t const test_configuration_descriptor[] = {
// Config number, interface count, string index, total length, attribute, power in mA
TUD_CONFIG_DESCRIPTOR(1, 0, 0, TUSB_DESC_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_SELF_POWERED | TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
};
static const tusb_desc_device_t test_device_descriptor = {
.bLength = sizeof(test_device_descriptor),
.bDescriptorType = TUSB_DESC_DEVICE,
.bcdUSB = 0x0200,
.bDeviceClass = TUSB_CLASS_MISC,
.bDeviceSubClass = MISC_SUBCLASS_COMMON,
.bDeviceProtocol = MISC_PROTOCOL_IAD,
.bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE,
.idVendor = 0x303A, // This is Espressif VID. This needs to be changed according to Users / Customers
.idProduct = 0x4002,
.bcdDevice = 0x100,
.iManufacturer = 0x01,
.iProduct = 0x02,
.iSerialNumber = 0x03,
.bNumConfigurations = 0x01
};
void test_bvalid_sig_mount_cb(void)
{
dev_mounted++;
}
void test_bvalid_sig_umount_cb(void)
{
dev_umounted++;
}
TEST_CASE("bvalid_signal", "[esp_tinyusb][usb_device]")
{
unsigned int rounds = DEVICE_DETACH_TEST_ROUNDS;
// Install TinyUSB driver
const tinyusb_config_t tusb_cfg = {
.external_phy = false,
.device_descriptor = &test_device_descriptor,
.configuration_descriptor = test_configuration_descriptor,
};
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_install(&tusb_cfg));
dev_mounted = 0;
dev_umounted = 0;
while (rounds--) {
// LOW to emulate disconnect USB device
esp_rom_gpio_connect_in_signal(GPIO_MATRIX_CONST_ZERO_INPUT, USB_SRP_BVALID_IN_IDX, false);
vTaskDelay(pdMS_TO_TICKS(DEVICE_DETACH_ROUND_DELAY_MS));
// HIGH to emulate connect USB device
esp_rom_gpio_connect_in_signal(GPIO_MATRIX_CONST_ONE_INPUT, USB_SRP_BVALID_IN_IDX, false);
vTaskDelay(pdMS_TO_TICKS(DEVICE_DETACH_ROUND_DELAY_MS));
}
// Verify
TEST_ASSERT_EQUAL(dev_umounted, dev_mounted);
TEST_ASSERT_EQUAL(DEVICE_DETACH_TEST_ROUNDS, dev_mounted);
// Cleanup
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_uninstall());
TEST_ASSERT_EQUAL(ESP_OK, tusb_stop_task());
}
#endif // SOC_USB_OTG_SUPPORTED

View File

@ -1,18 +0,0 @@
/*
* SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
void test_bvalid_sig_mount_cb(void);
void test_bvalid_sig_umount_cb(void);
#ifdef __cplusplus
}
#endif //__cplusplus

View File

@ -1,235 +0,0 @@
/*
* SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "soc/soc_caps.h"
#if SOC_USB_OTG_SUPPORTED
#include <stdio.h>
#include <string.h>
#include "esp_system.h"
#include "esp_err.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/semphr.h"
#include "esp_log.h"
#include "esp_err.h"
#include "driver/gpio.h"
#include "esp_rom_gpio.h"
#include "soc/gpio_sig_map.h"
#include "unity.h"
#include "tinyusb.h"
#include "tusb_tasks.h"
#define DEVICE_MOUNT_TIMEOUT_MS 5000
// ========================= TinyUSB descriptors ===============================
#define TUSB_DESC_TOTAL_LEN (TUD_CONFIG_DESC_LEN)
static uint8_t const test_fs_configuration_descriptor[] = {
// Config number, interface count, string index, total length, attribute, power in mA
TUD_CONFIG_DESCRIPTOR(1, 0, 0, TUSB_DESC_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_SELF_POWERED | TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
};
#if (TUD_OPT_HIGH_SPEED)
static uint8_t const test_hs_configuration_descriptor[] = {
// Config number, interface count, string index, total length, attribute, power in mA
TUD_CONFIG_DESCRIPTOR(1, 0, 0, TUSB_DESC_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_SELF_POWERED | TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
};
#endif // TUD_OPT_HIGH_SPEED
static const tusb_desc_device_t test_device_descriptor = {
.bLength = sizeof(test_device_descriptor),
.bDescriptorType = TUSB_DESC_DEVICE,
.bcdUSB = 0x0200,
.bDeviceClass = TUSB_CLASS_MISC,
.bDeviceSubClass = MISC_SUBCLASS_COMMON,
.bDeviceProtocol = MISC_PROTOCOL_IAD,
.bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE,
.idVendor = 0x303A, // This is Espressif VID. This needs to be changed according to Users / Customers
.idProduct = 0x4002,
.bcdDevice = 0x100,
.iManufacturer = 0x01,
.iProduct = 0x02,
.iSerialNumber = 0x03,
.bNumConfigurations = 0x01
};
// ========================== Private logic ====================================
SemaphoreHandle_t desc_config_device_mounted = NULL;
static bool __test_prep(void)
{
desc_config_device_mounted = xSemaphoreCreateBinary();
return (desc_config_device_mounted != NULL);
}
static esp_err_t __test_wait_conn(void)
{
if (!desc_config_device_mounted) {
return ESP_ERR_INVALID_STATE;
}
return ( xSemaphoreTake(desc_config_device_mounted, pdMS_TO_TICKS(DEVICE_MOUNT_TIMEOUT_MS))
? ESP_OK
: ESP_ERR_TIMEOUT );
}
static void __test_conn(void)
{
if (desc_config_device_mounted) {
xSemaphoreGive(desc_config_device_mounted);
}
}
static void __test_free(void)
{
if (desc_config_device_mounted) {
vSemaphoreDelete(desc_config_device_mounted);
}
}
// ========================== Callbacks ========================================
// Invoked when device is mounted
void test_descriptors_config_mount_cb(void)
{
__test_conn();
}
void test_descriptors_config_umount_cb(void)
{
}
TEST_CASE("descriptors_config_all_default", "[esp_tinyusb][usb_device]")
{
TEST_ASSERT_EQUAL(true, __test_prep());
// Install TinyUSB driver
const tinyusb_config_t tusb_cfg = {
.external_phy = false,
.device_descriptor = NULL,
.configuration_descriptor = NULL,
#if (TUD_OPT_HIGH_SPEED)
.hs_configuration_descriptor = NULL,
#endif // TUD_OPT_HIGH_SPEED
};
// Install
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_install(&tusb_cfg));
// Wait for mounted callback
TEST_ASSERT_EQUAL(ESP_OK, __test_wait_conn());
// Cleanup
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_uninstall());
TEST_ASSERT_EQUAL(ESP_OK, tusb_stop_task());
__test_free();
}
TEST_CASE("descriptors_config_device", "[esp_tinyusb][usb_device]")
{
TEST_ASSERT_EQUAL(true, __test_prep());
// Install TinyUSB driver
const tinyusb_config_t tusb_cfg = {
.external_phy = false,
.device_descriptor = &test_device_descriptor,
.configuration_descriptor = NULL,
#if (TUD_OPT_HIGH_SPEED)
.hs_configuration_descriptor = NULL,
#endif // TUD_OPT_HIGH_SPEED
};
// Install
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_install(&tusb_cfg));
// Wait for mounted callback
TEST_ASSERT_EQUAL(ESP_OK, __test_wait_conn());
// Cleanup
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_uninstall());
TEST_ASSERT_EQUAL(ESP_OK, tusb_stop_task());
__test_free();
}
TEST_CASE("descriptors_config_device_and_config", "[esp_tinyusb][usb_device]")
{
TEST_ASSERT_EQUAL(true, __test_prep());
// Install TinyUSB driver
const tinyusb_config_t tusb_cfg = {
.external_phy = false,
.device_descriptor = &test_device_descriptor,
.configuration_descriptor = test_fs_configuration_descriptor,
#if (TUD_OPT_HIGH_SPEED)
.hs_configuration_descriptor = NULL,
#endif // TUD_OPT_HIGH_SPEED
};
// Install
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_install(&tusb_cfg));
// Wait for mounted callback
TEST_ASSERT_EQUAL(ESP_OK, __test_wait_conn());
// Cleanup
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_uninstall());
TEST_ASSERT_EQUAL(ESP_OK, tusb_stop_task());
__test_free();
}
#if (TUD_OPT_HIGH_SPEED)
TEST_CASE("descriptors_config_device_and_fs_config_only", "[esp_tinyusb][usb_device]")
{
TEST_ASSERT_EQUAL(true, __test_prep());
// Install TinyUSB driver
const tinyusb_config_t tusb_cfg = {
.external_phy = false,
.device_descriptor = &test_device_descriptor,
.configuration_descriptor = test_fs_configuration_descriptor,
.hs_configuration_descriptor = NULL,
};
// Install
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_install(&tusb_cfg));
// Wait for mounted callback
TEST_ASSERT_EQUAL(ESP_OK, __test_wait_conn());
// Cleanup
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_uninstall());
TEST_ASSERT_EQUAL(ESP_OK, tusb_stop_task());
__test_free();
}
TEST_CASE("descriptors_config_device_and_hs_config_only", "[esp_tinyusb][usb_device]")
{
TEST_ASSERT_EQUAL(true, __test_prep());
// Install TinyUSB driver
const tinyusb_config_t tusb_cfg = {
.external_phy = false,
.device_descriptor = &test_device_descriptor,
.configuration_descriptor = NULL,
.hs_configuration_descriptor = test_hs_configuration_descriptor,
};
// Install
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_install(&tusb_cfg));
// Wait for mounted callback
TEST_ASSERT_EQUAL(ESP_OK, __test_wait_conn());
// Cleanup
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_uninstall());
TEST_ASSERT_EQUAL(ESP_OK, tusb_stop_task());
__test_free();
}
TEST_CASE("descriptors_config_all_configured", "[esp_tinyusb][usb_device]")
{
TEST_ASSERT_EQUAL(true, __test_prep());
// Install TinyUSB driver
const tinyusb_config_t tusb_cfg = {
.external_phy = false,
.device_descriptor = &test_device_descriptor,
.fs_configuration_descriptor = test_fs_configuration_descriptor,
.hs_configuration_descriptor = test_hs_configuration_descriptor,
};
// Install
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_install(&tusb_cfg));
// Wait for mounted callback
TEST_ASSERT_EQUAL(ESP_OK, __test_wait_conn());
// Cleanup
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_uninstall());
TEST_ASSERT_EQUAL(ESP_OK, tusb_stop_task());
__test_free();
}
#endif // TUD_OPT_HIGH_SPEED
#endif // SOC_USB_OTG_SUPPORTED

View File

@ -1,18 +0,0 @@
/*
* SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
void test_descriptors_config_mount_cb(void);
void test_descriptors_config_umount_cb(void);
#ifdef __cplusplus
}
#endif //__cplusplus

View File

@ -1,132 +0,0 @@
/*
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "soc/soc_caps.h"
#if SOC_USB_OTG_SUPPORTED
#include <stdio.h>
#include <string.h>
#include "esp_system.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_log.h"
#include "esp_err.h"
#include "unity.h"
#include "tinyusb.h"
#include "tusb_cdc_acm.h"
#include "vfs_tinyusb.h"
#define VFS_PATH "/dev/usb-cdc1"
// idf_component_register(WHOLE_ARCHIVE) backward compatibility to IDF_v4.4
void linker_hook(void) {};
static const tusb_desc_device_t cdc_device_descriptor = {
.bLength = sizeof(cdc_device_descriptor),
.bDescriptorType = TUSB_DESC_DEVICE,
.bcdUSB = 0x0200,
.bDeviceClass = TUSB_CLASS_MISC,
.bDeviceSubClass = MISC_SUBCLASS_COMMON,
.bDeviceProtocol = MISC_PROTOCOL_IAD,
.bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE,
.idVendor = USB_ESPRESSIF_VID,
.idProduct = 0x4002,
.bcdDevice = 0x0100,
.iManufacturer = 0x01,
.iProduct = 0x02,
.iSerialNumber = 0x03,
.bNumConfigurations = 0x01
};
static const uint16_t cdc_desc_config_len = TUD_CONFIG_DESC_LEN + CFG_TUD_CDC * TUD_CDC_DESC_LEN;
static const uint8_t cdc_desc_configuration[] = {
TUD_CONFIG_DESCRIPTOR(1, 4, 0, cdc_desc_config_len, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
TUD_CDC_DESCRIPTOR(0, 4, 0x81, 8, 0x02, 0x82, 64),
TUD_CDC_DESCRIPTOR(2, 4, 0x83, 8, 0x04, 0x84, 64),
};
static void tinyusb_cdc_rx_callback(int itf, cdcacm_event_t *event)
{
}
/**
* @brief TinyUSB CDC testcase
*
* This is not a 'standard' testcase, as it never exits. The testcase runs in a loop where it echoes back all the data received.
*
* - Init TinyUSB with standard CDC device and configuration descriptors
* - Init 2 CDC-ACM interfaces
* - Map CDC1 to Virtual File System
* - In a loop: Read data from CDC0 and CDC1. Echo received data back
*
* Note: CDC0 appends 'novfs' to echoed data, so the host (test runner) can easily determine which port is which.
*/
TEST_CASE("tinyusb_cdc", "[esp_tinyusb]")
{
// Install TinyUSB driver
const tinyusb_config_t tusb_cfg = {
.external_phy = false,
.device_descriptor = &cdc_device_descriptor,
.configuration_descriptor = cdc_desc_configuration
};
TEST_ASSERT_EQUAL(ESP_OK, tinyusb_driver_install(&tusb_cfg));
tinyusb_config_cdcacm_t acm_cfg = {
.usb_dev = TINYUSB_USBDEV_0,
.cdc_port = TINYUSB_CDC_ACM_0,
.rx_unread_buf_sz = 64,
.callback_rx = &tinyusb_cdc_rx_callback,
.callback_rx_wanted_char = NULL,
.callback_line_state_changed = NULL,
.callback_line_coding_changed = NULL
};
// Init CDC 0
TEST_ASSERT_FALSE(tusb_cdc_acm_initialized(TINYUSB_CDC_ACM_0));
TEST_ASSERT_EQUAL(ESP_OK, tusb_cdc_acm_init(&acm_cfg));
TEST_ASSERT_TRUE(tusb_cdc_acm_initialized(TINYUSB_CDC_ACM_0));
// Init CDC 1
acm_cfg.cdc_port = TINYUSB_CDC_ACM_1;
acm_cfg.callback_rx = NULL;
TEST_ASSERT_FALSE(tusb_cdc_acm_initialized(TINYUSB_CDC_ACM_1));
TEST_ASSERT_EQUAL(ESP_OK, tusb_cdc_acm_init(&acm_cfg));
TEST_ASSERT_TRUE(tusb_cdc_acm_initialized(TINYUSB_CDC_ACM_1));
// Install VFS to CDC 1
TEST_ASSERT_EQUAL(ESP_OK, esp_vfs_tusb_cdc_register(TINYUSB_CDC_ACM_1, VFS_PATH));
esp_vfs_tusb_cdc_set_rx_line_endings(ESP_LINE_ENDINGS_CRLF);
esp_vfs_tusb_cdc_set_tx_line_endings(ESP_LINE_ENDINGS_LF);
FILE *cdc = fopen(VFS_PATH, "r+");
TEST_ASSERT_NOT_NULL(cdc);
uint8_t buf[CONFIG_TINYUSB_CDC_RX_BUFSIZE + 1];
while (true) {
size_t b = fread(buf, 1, sizeof(buf), cdc);
if (b > 0) {
printf("Intf VFS, RX %d bytes\n", b);
//ESP_LOG_BUFFER_HEXDUMP("test", buf, b, ESP_LOG_INFO);
fwrite(buf, 1, b, cdc);
}
vTaskDelay(1);
size_t rx_size = 0;
int itf = 0;
ESP_ERROR_CHECK(tinyusb_cdcacm_read(itf, buf, CONFIG_TINYUSB_CDC_RX_BUFSIZE, &rx_size));
if (rx_size > 0) {
printf("Intf %d, RX %d bytes\n", itf, rx_size);
// Add 'novfs' to reply so the host can identify the port
strcpy((char *)&buf[rx_size - 2], "novfs\r\n");
tinyusb_cdcacm_write_queue(itf, buf, rx_size + sizeof("novfs") - 1);
tinyusb_cdcacm_write_flush(itf, 0);
}
}
}
#endif

View File

@ -1,28 +0,0 @@
/*
* SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdio.h>
#include <string.h>
#include "tinyusb.h"
#include "tusb_tasks.h"
#include "test_bvalid_sig.h"
#include "test_descriptors_config.h"
// Invoked when device is mounted
void tud_mount_cb(void)
{
printf("%s\n", __FUNCTION__);
test_bvalid_sig_mount_cb();
test_descriptors_config_mount_cb();
}
// Invoked when device is unmounted
void tud_umount_cb(void)
{
printf("%s\n", __FUNCTION__);
test_bvalid_sig_umount_cb();
test_descriptors_config_umount_cb();
}

View File

@ -1,73 +0,0 @@
# SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
# SPDX-License-Identifier: Apache-2.0
import pytest
from pytest_embedded_idf.dut import IdfDut
from time import sleep
from serial import Serial
from serial.tools.list_ports import comports
@pytest.mark.esp32s2
@pytest.mark.esp32s3
@pytest.mark.usb_device
def test_usb_device_cdc(dut) -> None:
'''
Running the test locally:
1. Build the testa app for your DUT (ESP32-S2 or S3)
2. Connect you DUT to your test runner (local machine) with USB port and flashing port
3. Run `pytest --target esp32s3`
Test procedure:
1. Run the test on the DUT
2. Expect 2 Virtual COM Ports in the system
3. Open both comports and send some data. Expect echoed data
'''
dut.expect_exact('Press ENTER to see the list of tests.')
dut.write('[esp_tinyusb]')
dut.expect_exact('TinyUSB: TinyUSB Driver installed')
sleep(2) # Some time for the OS to enumerate our USB device
# Find devices with Espressif TinyUSB VID/PID
s = []
ports = comports()
for port, _, hwid in ports:
if '303A:4002' in hwid:
s.append(port)
if len(s) != 2:
raise Exception('TinyUSB COM port not found')
with Serial(s[0]) as cdc0:
with Serial(s[1]) as cdc1:
# Write dummy string and check for echo
cdc0.write('text\r\n'.encode())
res = cdc0.readline()
assert b'text' in res
if b'novfs' in res:
novfs_cdc = cdc0
vfs_cdc = cdc1
cdc1.write('text\r\n'.encode())
res = cdc1.readline()
assert b'text' in res
if b'novfs' in res:
novfs_cdc = cdc1
vfs_cdc = cdc0
# Write more than MPS, check that the transfer is not divided
novfs_cdc.write(bytes(100))
dut.expect_exact("Intf 0, RX 100 bytes")
# Write more than RX buffer, check correct reception
novfs_cdc.write(bytes(600))
transfer_len1 = int(dut.expect(r'Intf 0, RX (\d+) bytes')[1].decode())
transfer_len2 = int(dut.expect(r'Intf 0, RX (\d+) bytes')[1].decode())
assert transfer_len1 + transfer_len2 == 600
# The VFS is setup for CRLF RX and LF TX
vfs_cdc.write('text\r\n'.encode())
res = vfs_cdc.readline()
assert b'text\n' in res
return

View File

@ -1,12 +0,0 @@
# SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
# SPDX-License-Identifier: Apache-2.0
import pytest
from pytest_embedded_idf.dut import IdfDut
@pytest.mark.esp32s2
@pytest.mark.esp32s3
@pytest.mark.usb_device
def test_usb_device_esp_tinyusb(dut: IdfDut) -> None:
dut.run_all_single_board_cases(group='usb_device')

Some files were not shown because too many files have changed in this diff Show More