Air_58Printer/main/main.c

90 lines
2.7 KiB
C

#include <stdio.h>
#include <inttypes.h>
#include "sdkconfig.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_chip_info.h"
#include "esp_flash.h"
#include "esp_system.h"
#include "driver/gpio.h"
#include "esp_system.h"
#include "esp_log.h"
#include "module/include/Sys_Printer.h"
#include "module/Printer_Config.h"
static const char *TAG = "example";
#define BLINK_GPIO 4
static uint8_t s_led_state = 0;
static void blink_led(void)
{
/* Set the GPIO level according to the state (LOW or HIGH)*/
gpio_set_level(BLINK_GPIO, s_led_state);
}
static void configure_led(void)
{
ESP_LOGI(TAG, "Example configured to blink GPIO LED!");
gpio_reset_pin(BLINK_GPIO);
/* Set the GPIO as a push/pull output */
gpio_set_direction(BLINK_GPIO, GPIO_MODE_OUTPUT);
}
void app_main(void)
{
/* Print chip information */
esp_chip_info_t chip_info;
uint32_t flash_size;
esp_chip_info(&chip_info);
printf("This is %s chip with %d CPU core(s), %s%s%s%s, ",
CONFIG_IDF_TARGET,
chip_info.cores,
(chip_info.features & CHIP_FEATURE_WIFI_BGN) ? "WiFi/" : "",
(chip_info.features & CHIP_FEATURE_BT) ? "BT" : "",
(chip_info.features & CHIP_FEATURE_BLE) ? "BLE" : "",
(chip_info.features & CHIP_FEATURE_IEEE802154) ? ", 802.15.4 (Zigbee/Thread)" : "");
unsigned major_rev = chip_info.revision / 100;
unsigned minor_rev = chip_info.revision % 100;
printf("silicon revision v%d.%d, ", major_rev, minor_rev);
if(esp_flash_get_size(NULL, &flash_size) != ESP_OK) {
printf("Get flash size failed");
return;
}
// ESP_ERROR_CHECK(gpio_config());
printf("%" PRIu32 "MB %s flash\n", flash_size / (uint32_t)(1024 * 1024),
(chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "embedded" : "external");
printf("Minimum free heap size: %" PRIu32 " bytes\n", esp_get_minimum_free_heap_size());
Printer_group = xEventGroupCreate();
button_init();
Printer_Bsp_Init();
Printer_run_init();
while (1) {
// Motor_GO(1);
/* Toggle the LED state */
s_led_state = !s_led_state;
// if(gpio_get_level(FEED_KEY.pin_num) == 0)
// {
// // ESP_LOGI(TAG, "FEED_KEY:%d",0);
// //Motor_GO(1);
// xEventGroupSetBits(Printer_group,EVENT_Motor_Test);
// while (gpio_get_level(FEED_KEY.pin_num) == 0) {
// vTaskDelay(10 / portTICK_PERIOD_MS);
// }
// }else{
// // Motor_GO(0xff);
// }
vTaskDelay(1000 / portTICK_PERIOD_MS);
// ESP_LOGI(TAG, "LED State:%d",!s_led_state);
}
fflush(stdout);
esp_restart();
}