Air_58Printer/main/main.c
2024-08-23 11:21:55 +08:00

149 lines
4.7 KiB
C

#include <stdio.h>
#include <inttypes.h>
#include "sdkconfig.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_chip_info.h"
#include "esp_flash.h"
#include "esp_system.h"
#include "driver/gpio.h"
#include "esp_system.h"
#include "esp_log.h"
#include "tinyusb.h"
#include "tusb_cdc_acm.h"
#include "module/include/Sys_Printer.h"
#include "module/Printer_Config.h"
static const char *TAG = "example";
#define BLINK_GPIO 4
static uint8_t buf[CONFIG_TINYUSB_CDC_RX_BUFSIZE + 1];
void tinyusb_cdc_rx_callback(int itf, cdcacm_event_t *event)
{
/* initialization */
size_t rx_size = 0;
/* read */
esp_err_t ret = tinyusb_cdcacm_read(itf, buf, CONFIG_TINYUSB_CDC_RX_BUFSIZE, &rx_size);
if (ret == ESP_OK) {
ESP_LOGI(TAG, "Data from channel %d:", itf);
ESP_LOG_BUFFER_HEXDUMP(TAG, buf, rx_size, ESP_LOG_INFO);
} else {
ESP_LOGE(TAG, "Read error");
}
/* write back */
tinyusb_cdcacm_write_queue(itf, buf, rx_size);
tinyusb_cdcacm_write_flush(itf, 0);
}
void tinyusb_cdc_line_state_changed_callback(int itf, cdcacm_event_t *event)
{
int dtr = event->line_state_changed_data.dtr;
int rts = event->line_state_changed_data.rts;
ESP_LOGI(TAG, "Line state changed on channel %d: DTR:%d, RTS:%d", itf, dtr, rts);
}
void app_main(void)
{
/* Print chip information */
esp_chip_info_t chip_info;
uint32_t flash_size;
esp_chip_info(&chip_info);
printf("This is %s chip with %d CPU core(s), %s%s%s%s, ",
CONFIG_IDF_TARGET,
chip_info.cores,
(chip_info.features & CHIP_FEATURE_WIFI_BGN) ? "WiFi/" : "",
(chip_info.features & CHIP_FEATURE_BT) ? "BT" : "",
(chip_info.features & CHIP_FEATURE_BLE) ? "BLE" : "",
(chip_info.features & CHIP_FEATURE_IEEE802154) ? ", 802.15.4 (Zigbee/Thread)" : "");
unsigned major_rev = chip_info.revision / 100;
unsigned minor_rev = chip_info.revision % 100;
printf("silicon revision v%d.%d, ", major_rev, minor_rev);
if(esp_flash_get_size(NULL, &flash_size) != ESP_OK) {
printf("Get flash size failed");
return;
}
// ESP_ERROR_CHECK(gpio_config());
printf("%" PRIu32 "MB %s flash\n", flash_size / (uint32_t)(1024 * 1024),
(chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "embedded" : "external");
printf("Minimum free heap size: %" PRIu32 " bytes\n", esp_get_minimum_free_heap_size());
ESP_LOGI(TAG, "USB initialization");
const tinyusb_config_t tusb_cfg = {
.device_descriptor = NULL,
.string_descriptor = NULL,
.external_phy = false,
#if (TUD_OPT_HIGH_SPEED)
.fs_configuration_descriptor = NULL,
.hs_configuration_descriptor = NULL,
.qualifier_descriptor = NULL,
#else
.configuration_descriptor = NULL,
#endif // TUD_OPT_HIGH_SPEED
};
ESP_ERROR_CHECK(tinyusb_driver_install(&tusb_cfg));
tinyusb_config_cdcacm_t acm_cfg = {
.usb_dev = TINYUSB_USBDEV_0,
.cdc_port = TINYUSB_CDC_ACM_0,
.rx_unread_buf_sz = 64,
.callback_rx = &tinyusb_cdc_rx_callback, // the first way to register a callback
.callback_rx_wanted_char = NULL,
.callback_line_state_changed = NULL,
.callback_line_coding_changed = NULL
};
ESP_ERROR_CHECK(tusb_cdc_acm_init(&acm_cfg));
/* the second way to register a callback */
ESP_ERROR_CHECK(tinyusb_cdcacm_register_callback(
TINYUSB_CDC_ACM_0,
CDC_EVENT_LINE_STATE_CHANGED,
&tinyusb_cdc_line_state_changed_callback));
#if (CONFIG_TINYUSB_CDC_COUNT > 1)
acm_cfg.cdc_port = TINYUSB_CDC_ACM_1;
ESP_ERROR_CHECK(tusb_cdc_acm_init(&acm_cfg));
ESP_ERROR_CHECK(tinyusb_cdcacm_register_callback(
TINYUSB_CDC_ACM_1,
CDC_EVENT_LINE_STATE_CHANGED,
&tinyusb_cdc_line_state_changed_callback));
#endif
ESP_LOGI(TAG, "USB initialization DONE");
Printer_group = xEventGroupCreate();
button_init();
Printer_Bsp_Init();
Printer_run_init();
while (1) {
// Motor_GO(1);
/* Toggle the LED state */
// if(gpio_get_level(FEED_KEY.pin_num) == 0)
// {
// // ESP_LOGI(TAG, "FEED_KEY:%d",0);
// //Motor_GO(1);
// xEventGroupSetBits(Printer_group,EVENT_Motor_Test);
// while (gpio_get_level(FEED_KEY.pin_num) == 0) {
// vTaskDelay(10 / portTICK_PERIOD_MS);
// }
// }else{
// // Motor_GO(0xff);
// }
vTaskDelay(1000 / portTICK_PERIOD_MS);
// ESP_LOGI(TAG, "LED State:%d",!s_led_state);
}
fflush(stdout);
esp_restart();
}