90 lines
2.7 KiB
C
90 lines
2.7 KiB
C
#include <stdio.h>
|
|
#include <inttypes.h>
|
|
#include "sdkconfig.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "esp_chip_info.h"
|
|
#include "esp_flash.h"
|
|
#include "esp_system.h"
|
|
#include "driver/gpio.h"
|
|
#include "esp_system.h"
|
|
#include "esp_log.h"
|
|
#include "module/include/Sys_Printer.h"
|
|
#include "module/Printer_Config.h"
|
|
|
|
|
|
static const char *TAG = "example";
|
|
|
|
#define BLINK_GPIO 4
|
|
|
|
|
|
static uint8_t s_led_state = 0;
|
|
|
|
static void blink_led(void)
|
|
{
|
|
/* Set the GPIO level according to the state (LOW or HIGH)*/
|
|
gpio_set_level(BLINK_GPIO, s_led_state);
|
|
}
|
|
|
|
static void configure_led(void)
|
|
{
|
|
ESP_LOGI(TAG, "Example configured to blink GPIO LED!");
|
|
gpio_reset_pin(BLINK_GPIO);
|
|
/* Set the GPIO as a push/pull output */
|
|
gpio_set_direction(BLINK_GPIO, GPIO_MODE_OUTPUT);
|
|
}
|
|
|
|
void app_main(void)
|
|
{
|
|
/* Print chip information */
|
|
esp_chip_info_t chip_info;
|
|
uint32_t flash_size;
|
|
esp_chip_info(&chip_info);
|
|
printf("This is %s chip with %d CPU core(s), %s%s%s%s, ",
|
|
CONFIG_IDF_TARGET,
|
|
chip_info.cores,
|
|
(chip_info.features & CHIP_FEATURE_WIFI_BGN) ? "WiFi/" : "",
|
|
(chip_info.features & CHIP_FEATURE_BT) ? "BT" : "",
|
|
(chip_info.features & CHIP_FEATURE_BLE) ? "BLE" : "",
|
|
(chip_info.features & CHIP_FEATURE_IEEE802154) ? ", 802.15.4 (Zigbee/Thread)" : "");
|
|
|
|
unsigned major_rev = chip_info.revision / 100;
|
|
unsigned minor_rev = chip_info.revision % 100;
|
|
printf("silicon revision v%d.%d, ", major_rev, minor_rev);
|
|
if(esp_flash_get_size(NULL, &flash_size) != ESP_OK) {
|
|
printf("Get flash size failed");
|
|
return;
|
|
}
|
|
// ESP_ERROR_CHECK(gpio_config());
|
|
printf("%" PRIu32 "MB %s flash\n", flash_size / (uint32_t)(1024 * 1024),
|
|
(chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "embedded" : "external");
|
|
|
|
printf("Minimum free heap size: %" PRIu32 " bytes\n", esp_get_minimum_free_heap_size());
|
|
|
|
Printer_group = xEventGroupCreate();
|
|
button_init();
|
|
Printer_Bsp_Init();
|
|
Printer_run_init();
|
|
|
|
while (1) {
|
|
// Motor_GO(1);
|
|
/* Toggle the LED state */
|
|
s_led_state = !s_led_state;
|
|
// if(gpio_get_level(FEED_KEY.pin_num) == 0)
|
|
// {
|
|
// // ESP_LOGI(TAG, "FEED_KEY:%d",0);
|
|
// //Motor_GO(1);
|
|
// xEventGroupSetBits(Printer_group,EVENT_Motor_Test);
|
|
// while (gpio_get_level(FEED_KEY.pin_num) == 0) {
|
|
// vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
// }
|
|
// }else{
|
|
// // Motor_GO(0xff);
|
|
// }
|
|
vTaskDelay(1000 / portTICK_PERIOD_MS);
|
|
// ESP_LOGI(TAG, "LED State:%d",!s_led_state);
|
|
}
|
|
fflush(stdout);
|
|
esp_restart();
|
|
}
|