Air_58Printer/main/module/esp_sleep.c
2024-08-26 11:22:11 +08:00

118 lines
3.9 KiB
C

#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <time.h>
#include <sys/time.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "driver/uart.h"
#include "esp_sleep.h"
#include "esp_log.h"
#include "esp_timer.h"
#include "esp_check.h"
#include "driver/gpio.h"
#define TAG "esp_sleep"
#define BOOT_BUTTON_NUM 0
/* Use boot button as gpio input */
#define GPIO_WAKEUP_NUM BOOT_BUTTON_NUM
/* "Boot" button is active low */
#define GPIO_WAKEUP_LEVEL 0
void example_wait_gpio_inactive(void)
{
printf("Waiting for GPIO%d to go high...\n", GPIO_WAKEUP_NUM);
while (gpio_get_level(GPIO_WAKEUP_NUM) == GPIO_WAKEUP_LEVEL) {
vTaskDelay(pdMS_TO_TICKS(10));
}
}
esp_err_t example_register_gpio_wakeup(void)
{
/* Initialize GPIO */
gpio_config_t config = {
.pin_bit_mask = BIT64(GPIO_WAKEUP_NUM),
.mode = GPIO_MODE_INPUT,
.pull_down_en = false,
.pull_up_en = false,
.intr_type = GPIO_INTR_DISABLE
};
ESP_RETURN_ON_ERROR(gpio_config(&config), TAG, "Initialize GPIO%d failed", GPIO_WAKEUP_NUM);
/* Enable wake up from GPIO */
ESP_RETURN_ON_ERROR(gpio_wakeup_enable(GPIO_WAKEUP_NUM, GPIO_WAKEUP_LEVEL == 0 ? GPIO_INTR_LOW_LEVEL : GPIO_INTR_HIGH_LEVEL),
TAG, "Enable gpio wakeup failed");
ESP_RETURN_ON_ERROR(esp_sleep_enable_gpio_wakeup(), TAG, "Configure gpio as wakeup source failed");
/* Make sure the GPIO is inactive and it won't trigger wakeup immediately */
example_wait_gpio_inactive();
ESP_LOGI(TAG, "gpio wakeup source is ready");
return ESP_OK;
}
void light_sleep_task(void *args)
{
/* Enable wakeup from light sleep by gpio */
example_register_gpio_wakeup();
vTaskDelay(1000/ portTICK_PERIOD_MS);
while (true) {
printf("Entering light sleep\n");
/* To make sure the complete line is printed before entering sleep mode,
* need to wait until UART TX FIFO is empty:
*/
uart_wait_tx_idle_polling(CONFIG_ESP_CONSOLE_UART_NUM);
/* Get timestamp before entering sleep */
int64_t t_before_us = esp_timer_get_time();
/* Enter sleep mode */
esp_light_sleep_start();
/* Get timestamp after waking up from sleep */
int64_t t_after_us = esp_timer_get_time();
/* Determine wake up reason */
const char* wakeup_reason;
switch (esp_sleep_get_wakeup_cause()) {
case ESP_SLEEP_WAKEUP_TIMER:
wakeup_reason = "timer";
break;
case ESP_SLEEP_WAKEUP_GPIO:
wakeup_reason = "pin";
break;
case ESP_SLEEP_WAKEUP_UART:
wakeup_reason = "uart";
/* Hang-up for a while to switch and execute the uart task
* Otherwise the chip may fall sleep again before running uart task */
vTaskDelay(1);
break;
#if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
case ESP_SLEEP_WAKEUP_TOUCHPAD:
wakeup_reason = "touch";
break;
#endif
default:
wakeup_reason = "other";
break;
}
#if CONFIG_NEWLIB_NANO_FORMAT
/* printf in newlib-nano does not support %ll format, causing example test fail */
printf("Returned from light sleep, reason: %s, t=%d ms, slept for %d ms\n",
wakeup_reason, (int) (t_after_us / 1000), (int) ((t_after_us - t_before_us) / 1000));
#else
printf("Returned from light sleep, reason: %s, t=%lld ms, slept for %lld ms\n",
wakeup_reason, t_after_us / 1000, (t_after_us - t_before_us) / 1000);
#endif
if (esp_sleep_get_wakeup_cause() == ESP_SLEEP_WAKEUP_GPIO) {
/* Waiting for the gpio inactive, or the chip will continuously trigger wakeup*/
example_wait_gpio_inactive();
}
}
vTaskDelete(NULL);
}