#include #include #include #include #include #include #include #include #include #include int sockfd_can0; int socket_can_init(char* can_dev) { int sockfd_can; struct ifreq ifr; struct sockaddr_can addr; sockfd_can = socket(PF_CAN, SOCK_RAW, CAN_RAW); if (sockfd_can < 0) { perror("Error while opening socket"); return -1; } strcpy(ifr.ifr_name, can_dev); ioctl(sockfd_can, SIOCGIFINDEX, &ifr); // 绑定 CAN 套接字到接口 addr.can_family = AF_CAN; addr.can_ifindex = ifr.ifr_ifindex; if (bind(sockfd_can, (struct sockaddr *)&addr, sizeof(addr)) < 0) { perror("Error in socket bind"); return -2; } return sockfd_can; } int socket_can_send(int sockfd,uint32_t can_id,uint8_t data[8]) { struct can_frame frame; // 准备发送的 CAN 帧 frame.can_id = can_id; // 11位标准帧ID frame.can_dlc = 8; // 数据长度为8字节 // 使用循环赋值 CAN 数据帧 for (int i = 0; i < frame.can_dlc; i++) { frame.data[i] = data[i]; // 将数据从0x01到0x08依次赋值 } if (write(sockfd, &frame, sizeof(struct can_frame)) != sizeof(struct can_frame)) { perror("Write error"); return -3; } return 0; } int socket_can_close(int sockfd) { // 关闭套接字 close(sockfd); return -1; } int test() { int sockfd; struct sockaddr_can addr; struct ifreq ifr; struct can_frame frame; // 创建 CAN 套接字 sockfd = socket(PF_CAN, SOCK_RAW, CAN_RAW); if (sockfd < 0) { perror("Error while opening socket"); return -1; } // 指定 CAN 接口(假设为 can0) strcpy(ifr.ifr_name, "can0"); ioctl(sockfd, SIOCGIFINDEX, &ifr); // 绑定 CAN 套接字到接口 addr.can_family = AF_CAN; addr.can_ifindex = ifr.ifr_ifindex; if (bind(sockfd, (struct sockaddr *)&addr, sizeof(addr)) < 0) { perror("Error in socket bind"); return -2; } // 准备发送的 CAN 帧 frame.can_id = 0x123; // 11位标准帧ID frame.can_dlc = 8; // 数据长度为8字节 // 使用循环赋值 CAN 数据帧 for (int i = 0; i < frame.can_dlc; i++) { frame.data[i] = i + 1; // 将数据从0x01到0x08依次赋值 } // 发送 CAN 帧 for(int i=0;i<3;i++) { if (write(sockfd, &frame, sizeof(struct can_frame)) != sizeof(struct can_frame)) { perror("Write error"); return -3; } } printf("CAN message sent on can0\n"); // 关闭套接字 close(sockfd); return 0; }