App-lvgl-touchPad/components/libusb/fusb.c
2024-12-01 12:20:05 +00:00

272 lines
6.9 KiB
C
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#include "fusb.h"
#define USB_DEBUG_ENABLE
#define USB_VID 0x0FE6 // USB Device Vendor ID
//#define USB_PID 0x811e // USB Device Product ID
#define USB_PID 0x8800 // USB Device Product ID
#define USB_EP_ADDR_OUT 0x01 // USB Device Endpoint OUT Address
#define USB_IF_NUM 0 // USB Device Interface Number
#ifdef USB_DEBUG_ENABLE
#define USB_LOG(format, ...) printf(format"\n", ##__VA_ARGS__)
#else
#define USB_LOG(format, ...)
#endif
// libusb_context *usb_ctx = NULL;
// libusb_device_handle *dev_hd = NULL;
const char* usb_port_name_list[SUPPORT_USB_MAX_NUM] = {
"/sys/bus/usb/devices/1-1.1",
"/sys/bus/usb/devices/1-1.2",
"/sys/bus/usb/devices/1-1.3",
"/sys/bus/usb/devices/1-1.4",
};
printer_usb_info_t printer_dev[SUPPORT_USB_MAX_NUM];
/**
* @brief USB模块初始化
*/
int usb_init(void)
{
for (size_t i = 0; i < SUPPORT_USB_MAX_NUM; i++)
{
if(access(usb_port_name_list[i], F_OK) == 0)
{
if (printer_dev[i].usb_ctx != NULL)
{
continue;
}
if (libusb_init(&printer_dev[i].usb_ctx) != LIBUSB_SUCCESS)
{
USB_LOG("failed to init libusb");
return USB_ERR_LIBUSB_INIT_FAILED;
}
printer_dev[i].Serial = i;
printer_dev[i].pid = Get_Printer_device_info(usb_port_name_list[i],"PID");
printer_dev[i].vid = Get_Printer_device_info(usb_port_name_list[i],"VID");
}else{
printer_dev[i].Serial = 0xff;
}
}
USB_LOG("libusb inited");
return USB_OK;
}
/**
* @brief 打开USB设备
*/
int usb_open(printer_usb_info_t* printer_dev)
{
int ret;
int dev_conf;
libusb_context *usb_ctx = printer_dev->usb_ctx;
//libusb_device_handle *dev_hd = printer_dev->dev_handle;
if (usb_ctx == NULL)
{
return USB_ERR_LIBUSB_NOT_INIT;
}
if (printer_dev->dev_handle != NULL)
{
return USB_OK;
}
printer_dev->dev_handle = libusb_open_device_with_vid_pid(usb_ctx, USB_VID, USB_PID);
if (printer_dev->dev_handle == NULL)
{
USB_LOG("failed to open USB device");
return USB_ERR_OPEN_FAILED;
}
ret = libusb_get_configuration(printer_dev->dev_handle, &dev_conf);
if (ret != LIBUSB_SUCCESS)
{
USB_LOG("failed to get configuration");
libusb_close(printer_dev->dev_handle);
return USB_ERR_GET_CONF;
}
if (dev_conf != 1)
{
ret = libusb_set_configuration(printer_dev->dev_handle, 1);
USB_LOG("failed to set configuration");
libusb_close(printer_dev->dev_handle);
return USB_ERR_SET_CONF;
}
if (libusb_kernel_driver_active(printer_dev->dev_handle, 0) == 1)
{
ret = libusb_detach_kernel_driver(printer_dev->dev_handle, 0);
if (ret != LIBUSB_SUCCESS)
{
USB_LOG("failed to detach kernel driver");
libusb_close(printer_dev->dev_handle);
return USB_ERR_DETACH_FAILED;
}
}
ret = libusb_claim_interface(printer_dev->dev_handle, USB_IF_NUM);
if (ret != LIBUSB_SUCCESS)
{
USB_LOG("failed to claim interface");
libusb_close(printer_dev->dev_handle);
return USB_ERR_CLAIM_IF;
}
USB_LOG("device found and opened");
return USB_OK;
}
/**
* @brief 关闭USB设备
*/
int usb_close(printer_usb_info_t* printer_dev)
{
libusb_device_handle *dev_hd = printer_dev->dev_handle;
if (dev_hd == NULL)
{
return USB_OK;
}
if (libusb_release_interface(dev_hd, USB_IF_NUM) != LIBUSB_SUCCESS)
{
USB_LOG("failed to release interface");
}
libusb_close(dev_hd);
dev_hd = NULL;
USB_LOG("device closed");
return USB_OK;
}
/**
* @brief 使用USB Bulk向打印机发送数据
*
* @param buff 数据指针
* @param optsize 期望的数据发送大小
* @param ressize 实际的数据发送大小
* @param timeout 超时时间
*/
int usb_write(printer_usb_info_t* printer_dev,const void *buff, int size)
{
int ret;
int rest_size;
int pack_size;
int actual_size;
const uint8_t *buff_offs;
libusb_device_handle *dev_hd = printer_dev->dev_handle;
if (dev_hd == NULL || buff == NULL)
{
return USB_ERR_BAD_ARG;
}
if (size == 0)
{
return USB_OK;
}
rest_size = size;
buff_offs = (const uint8_t *)buff;
/* 其实USB全速设备传输一个最大页(17280字节)只需要1.44ms左右,
这完全足够及时中断USB传输,但是USB设备那边可能有时无法满足接收
条件(比如正在处理紧急事务等),超时时间如果很短的话,就有可能
最后发送发生超时,所以需要写成分段发送的形式,并且在每个分段之前
判断当前传输是否需要中断 */
while (rest_size > 0)
{
if (rest_size >= 512)
{
pack_size = 512;
}
else
{
pack_size = rest_size;
}
ret = libusb_bulk_transfer(dev_hd, USB_EP_ADDR_OUT, buff_offs, pack_size, &actual_size, 5);
if (ret == LIBUSB_SUCCESS || ret == LIBUSB_ERROR_TIMEOUT)
{
rest_size -= actual_size;
buff_offs += actual_size;
}
else if (ret == LIBUSB_ERROR_NO_DEVICE)
{
usb_close(printer_dev);
USB_LOG("device not found when using bulk transfer");
return USB_ERR_NO_DEV;
}
else
{
usb_close(printer_dev);
USB_LOG("failed to use bulk transfer, ret: %d %s", ret,libusb_error_name(ret));
return USB_ERR_UNKNOWN;
}
}
return USB_OK;
}
int Send_data_usb(printer_usb_info_t* printer_dev,uint8_t* buff,uint16_t len)
{
int ret = 0;
if(printer_dev == NULL)
{
return -1;
}
ret = usb_open(printer_dev);
if (ret != USB_OK)
{
printf("USB open fail\n");
return -1;
}
if(printer_dev->dev_handle == NULL)
{
printf("USB open fail\n");
}
usb_write(printer_dev,&buff[0],len);
usb_close(printer_dev);
return len;
}
int Get_Printer_device_info(char* device_dir,char* type)
{
FILE *File;
uint8_t index = 0;
char echo_buf[128] = {0};
char readBuf[5] = {0};
int num = 0;
if(type == NULL)
{
return -1;
}else if(strcmp(type,"VID") == 0)
{
sprintf(&echo_buf[0],"cat %s/idVendor",device_dir);
index = strlen(echo_buf);
echo_buf[index] = '\0';
printf("%s\r\n",&echo_buf[0]);
}else if(strcmp(type,"PID") == 0)
{
sprintf(&echo_buf[0],"cat %s/idProduct",device_dir);
index = strlen(echo_buf);
echo_buf[index] = '\0';
printf("%s\r\n",&echo_buf[0]);
}
char *endptr;
File = popen(&echo_buf[0],"r");
fread(readBuf,4,1,File);
num = strtol(readBuf, &endptr, 16);
printf("Devices--%s:0x%s\n",type,readBuf);
return num;
}