diff --git a/tools/esptools.py b/tools/esptools.py index e555dd8..2d9e1b7 100644 --- a/tools/esptools.py +++ b/tools/esptools.py @@ -71,6 +71,26 @@ def flash_file(chip, port, baud, address, file_path): print("正在烧录,命令:", flash_cmd) esptool.main(flash_cmd) +def read_flash(chip, port, baud, address, size, output_file): + cmd = [ + "esptool.py", + "--chip", chip, + "--port", port, + "--baud", str(baud), + "read_flash", + hex(address), + hex(size), + output_file + ] + + print("Running command:", " ".join(cmd)) + try: + subprocess.run(cmd, check=True) + print(f"✅ Flash 读取成功,保存为:{output_file}") + except subprocess.CalledProcessError as e: + print("❌ 读取失败:", e) + + if __name__ == "__main__": # directory = r"D:\\esp\\WorkSpace\\esp32c3-usb_serial\\main\\wifi\\www" # write_flash(directory) @@ -78,7 +98,13 @@ if __name__ == "__main__": chip = "esp32c3" port = "COM11" baud = 460800 - address = 0x2e1000 # 修改为你的烧录地址 - file_path = r"D:\esp\WorkSpace\esp32c3-usb_serial\tools\target_esp32s3.bin" # 修改为你的文件路径 + # address = 0x2e1000 # 修改为你的烧录地址 + # file_path = r"D:\esp\WorkSpace\esp32c3-usb_serial\tools\target_esp32s3.bin" # 修改为你的文件路径 - flash_file(chip, port, baud, address, file_path) \ No newline at end of file + # flash_file(chip, port, baud, address, file_path) + + address = 0x2e1000 # 起始地址 + size = 0x10000 # 读取大小,可以修改 + output_file = r"D:\esp\backup_read_flash.bin" + + read_flash(chip, port, baud, address, size, output_file) \ No newline at end of file