#pragma once #include "hal/spi_ll.h" #include "esp_lcd_panel_vendor.h" //-------------------------------------------------------------------------------- // System Function Command List and Description //-------------------------------------------------------------------------------- #define ST7735_SWRESET 0x01 // Software Reset #define ST7735_RDDID 0x04 // Read Display ID #define ST7735_RDDST 0x09 // Read Display Status #define ST7735_RDDPM 0x0A // Read Display Power Mode #define ST7735_RDDMADCTL 0x0B // Read Display MADCTL #define ST7735_RDDCOLMOD 0x0C // Read Display Pixel Format #define ST7735_RDDIM 0x0D // Read Display Image Mode #define ST7735_RDDSM 0x0E // Read Display Signal Mode #define ST7735_RDDSDR 0x0F // Read Display Self-Diagnostic Result . #define ST7735_SLPIN 0x10 // Sleep In #define ST7735_SLPOUT 0x11 // Sleep Out #define ST7735_PTLON 0x12 // Partial Display Mode On #define ST7735_NORON 0x13 // Normal Display Mode On #define ST7735_INVOFF 0x20 // Display Inversion OFF #define ST7735_INVON 0x21 // Display Inversion On #define ST7735_GAMSET 0x26 // Gamma Set #define ST7735_DISPOFF 0x28 // Display Off #define ST7735_DISPON 0x29 // Display On #define ST7735_CASET 0x2A // Column Address Set #define ST7735_RASET 0x2B // Row Address Set #define ST7735_RAMWR 0x2C // Memory Write #define ST7735_RGBSET 0x2D // Color Setting for 4K, 65K and 262K #define ST7735_RAMRD 0x2E // Memory Read #define ST7735_PTLAR 0x30 // Partial Area #define ST7735_SCRLAR 0x33 // Scroll Area Set #define ST7735_TEOFF 0x34 // Tearing Effect Line OFF #define ST7735_TEON 0x35 // Tearing Effect Line ON #define ST7735_MADCTL 0x36 // Memory Data Access Control #define ST7735_VSCSAD 0x37 // Vertical Scroll Start Address of RAM #define ST7735_IDMOFF 0x38 // Idle Mode Off #define ST7735_IDMON 0x39 // Idle Mode On #define ST7735_COLMOD 0x3A // Interface Pixel Format #define ST7735_RDID1 0xDA // Read ID1 Value #define ST7735_RDID2 0xDB // Read ID2 Value #define ST7735_RDID3 0xDC // Read ID3 Value //-------------------------------------------------------------------------------- // Panel Function Command List and Description //-------------------------------------------------------------------------------- #define ST7735_FRMCTR1 0xB1 // Frame Rate Control (In normal mode/ Full colors) #define ST7735_FRMCTR2 0xB2 // Frame Rate Control (In Idle mode/ 8-colors) #define ST7735_FRMCTR3 0xB3 // Frame Rate Control (In Partial mode/ full colors) #define ST7735_INVCTR 0xB4 // Display Inversion Control #define ST7735_PWCTR1 0xC0 // Power Control 1 #define ST7735_PWCTR2 0xC1 // Power Control 2 #define ST7735_PWCTR3 0xC2 // Power Control 3 (in Normal mode/ Full colors) #define ST7735_PWCTR4 0xC3 // Power Control 4 (in Idle mode/ 8-colors) #define ST7735_PWCTR5 0xC4 // Power Control 5 (in Partial mode/ full-colors) #define ST7735_VMCTR1 0xC5 // VCOM Control 1 #define ST7735_VMOFCTR 0xC7 // VCOM Offset Control #define ST7735_WRID2 0xD1 // Write ID2 Value #define ST7735_WRID3 0xD2 // Write ID3 Value #define ST7735_NVFCTR1 0xD9 // NVM Control Status #define ST7735_NVFCTR2 0xDE // NVM Read Command #define ST7735_NVFCTR3 0xDF // NVM Write Command #define ST7735_GMCTRP1 0xE0 // Gamma (‘+’polarity) Correction Characteristics Setting #define ST7735_GMCTRN1 0xE1 // Gamma ‘-’polarity Correction Characteristics Setting #define ST7735_GCV 0xFC // Gate Pump Clock Frequency Variable #ifdef __cplusplus extern "C" { #endif /** * @brief LCD panel initialization commands. * */ typedef struct { int cmd; /*