实现脱机烧录器功能

This commit is contained in:
Yu-886 2025-03-21 14:29:52 +08:00
parent 98dfc91e52
commit 663827d6a2
2 changed files with 114 additions and 34 deletions

View File

@ -72,7 +72,7 @@ static void echo_task(void *arg)
// Write data back to the USB SERIAL JTAG
if (len) {
// usb_serial_jtag_write_bytes((const char *) data, len, 20 / portTICK_PERIOD_MS);
usb_serial_jtag_write_bytes((const char *) data, len, 20 / portTICK_PERIOD_MS);
// uart_write_bytes(EX_UART_NUM, (const char *) data, len);
data[len] = '\0';
ESP_LOG_BUFFER_HEXDUMP("Recv str: ", data, len, ESP_LOG_INFO);
@ -196,10 +196,10 @@ void app_main(void)
err = nvs_flash_init(); // 重新初始化
}
ESP_ERROR_CHECK(err);
ESP_ERROR_CHECK(esp_netif_init());
// ESP_ERROR_CHECK(esp_netif_init());
ESP_ERROR_CHECK(esp_event_loop_create_default());
init_spiffs();
// init_spiffs();
ESPFlash_Init();
ESP_LOGI(TAG, "mem free:%ld",esp_get_free_heap_size());
gpio_config_t config = {
@ -209,7 +209,7 @@ void app_main(void)
};
gpio_config(&config);
gpio_set_level(8,0);
gpio_set_level(7,1);
// gpio_set_level(18,1);
/* Configure parameters of an UART driver,
* communication pins and install the driver */
uart_config_t uart_config = {
@ -228,47 +228,103 @@ void app_main(void)
//Create a task to handler UART event from ISR
// xTaskCreate(uart_event_task, "uart_event_task", 2048*10, NULL, 12, NULL);
home_html.html_data = load_html2Ram(home_html);
wifi_config_html.html_data = load_html2Ram(wifi_config_html);
upload_ota_html.html_data = load_html2Ram(upload_ota_html);
// favicon_ico.html_data = load_html2Ram(favicon_ico);
// ESP_LOGI(TAG, "ESP_WIFI_MODE_STA");
// ESP_LOGI(TAG,"def_name:%s",Sys_wifi_config.def_AP_Name);
ESP_LOGI(TAG,"sizeof--Sys_wifi_config:%d",sizeof(wifi_Save_info_t));
Read_ESPFlash(0x40,0,&Sys_wifi_config,sizeof(wifi_Save_info_t));
ESP_LOGI(TAG,"wifi_ssid:%s",Sys_wifi_config.wifi_ssid);
ESP_LOGI(TAG,"wifi_password:%s",Sys_wifi_config.wifi_password);
if(Sys_wifi_config.wifi_mode != 0x55)
{
wifi_init_softap();
}else{
wifi_init_station();
}
// home_html.html_data = load_html2Ram(home_html);
// wifi_config_html.html_data = load_html2Ram(wifi_config_html);
// upload_ota_html.html_data = load_html2Ram(upload_ota_html);
// // favicon_ico.html_data = load_html2Ram(favicon_ico);
// // ESP_LOGI(TAG, "ESP_WIFI_MODE_STA");
// // ESP_LOGI(TAG,"def_name:%s",Sys_wifi_config.def_AP_Name);
// ESP_LOGI(TAG,"sizeof--Sys_wifi_config:%d",sizeof(wifi_Save_info_t));
// Read_ESPFlash(0x40,0,&Sys_wifi_config,sizeof(wifi_Save_info_t));
// ESP_LOGI(TAG,"wifi_ssid:%s",Sys_wifi_config.wifi_ssid);
// ESP_LOGI(TAG,"wifi_password:%s",Sys_wifi_config.wifi_password);
// // if(Sys_wifi_config.wifi_mode != 0x55)
// {
// wifi_init_softap();
// }else{
// wifi_init_station();
// }
// while (1)
// {
// vTaskDelay(1000/ portTICK_PERIOD_MS);
// }
vTaskDelay(1000/ portTICK_PERIOD_MS);
start_web_server();
// start_web_server();
// xTaskCreate(tcp_server_task, "tcp_server", 4096, (void*)AF_INET, 5, NULL);
ESP_LOGI(TAG, "mem free:%ld",esp_get_free_heap_size());
// Document_feeder_test();
#if 1
#if 0
const loader_esp32_config_t config = {
.baud_rate = 115200,
.uart_port = UART_NUM_1,
.uart_rx_pin = GPIO_NUM_5,
.uart_tx_pin = GPIO_NUM_4,
.reset_trigger_pin = GPIO_NUM_2,
.gpio0_trigger_pin = GPIO_NUM_1,
uint8_t* load_buff = NULL;
const loader_esp32_config_t esp32c3_config = {
.baud_rate = 1152000,
.uart_port = UART_NUM_0,
.uart_rx_pin = GPIO_NUM_20,
.uart_tx_pin = GPIO_NUM_21,
.reset_trigger_pin = GPIO_NUM_9,
.gpio0_trigger_pin = GPIO_NUM_2,
};
if (loader_port_esp32_init(&config) != ESP_LOADER_SUCCESS) {
if (loader_port_esp32_init(&esp32c3_config) != ESP_LOADER_SUCCESS) {
ESP_LOGE(TAG, "serial initialization failed.");
return;
}
if (connect_to_target(230400) == ESP_LOADER_SUCCESS) {
if (connect_to_target(1152000) == ESP_LOADER_SUCCESS) {
ESP_LOGI(TAG, "connect_to_target initialization success.");
if(esp_get_free_heap_size() >200*1024)
{
load_buff = malloc(WRITE_BLOCK*1024+24);
if(load_buff == NULL)
{
return;
}
}
if(esp_loader_get_target() == ESP32S3_CHIP)
{
ESP_LOGI(TAG,"Find ESP32S3");
ESP_LOGI(TAG, "Loading bin...");
// flash_binary()
uint32_t bin_size = 749504;
uint32_t write_addr = 0;
while (bin_size)
{
if(bin_size > WRITE_BLOCK*1024)
{
if(Read_ESPFlash(0x45,write_addr,&load_buff[0],WRITE_BLOCK*1024) == WRITE_BLOCK*1024)
{
flash_binary(&load_buff[0],WRITE_BLOCK*1024,write_addr);
write_addr+=WRITE_BLOCK*1024;
bin_size -= WRITE_BLOCK*1024;
ESP_LOGI(TAG,"Load : %ld --- %ld",write_addr,bin_size);
}
}else{
Read_ESPFlash(0x45,write_addr,&load_buff[0],bin_size);
flash_binary(&load_buff[0],bin_size,write_addr);
write_addr += bin_size;
bin_size = 0;
ESP_LOGI(TAG,"Load : %ld --- %ld",write_addr,bin_size);
break;
}
}
ESP_LOGI(TAG, "Loading bin success");
ESP_LOGI(TAG, "Done!");
esp_loader_reset_target();
// Delay for skipping the boot message of the targets
vTaskDelay(500 / portTICK_PERIOD_MS);
// Forward slave's serial output
ESP_LOGI(TAG, "********************************************");
ESP_LOGI(TAG, "*** Logs below are print from slave .... ***");
ESP_LOGI(TAG, "********************************************");
}
}else{
ESP_LOGE(TAG, "connect_to_target initialization failed.");
}

View File

@ -55,6 +55,30 @@ def write_flash(directory, base_address=0x2D1000, port="COM11", baud=460800):
print("Flashing command:", flash_cmd)
esptool.main(flash_cmd)
def flash_file(chip, port, baud, address, file_path):
"""使用 esptool.main 烧录指定文件到 ESP32"""
if not os.path.exists(file_path):
print(f"文件未找到: {file_path}")
return
flash_cmd = [
"--chip", "esp32c3",
"--port", port,
"--baud", str(baud),
"write_flash", "--force", "-z", hex(address), file_path
]
print("正在烧录,命令:", flash_cmd)
esptool.main(flash_cmd)
if __name__ == "__main__":
directory = r"D:\\esp\\WorkSpace\\esp32c3-usb_serial\\main\\wifi\\www"
write_flash(directory)
# directory = r"D:\\esp\\WorkSpace\\esp32c3-usb_serial\\main\\wifi\\www"
# write_flash(directory)
chip = "esp32c3"
port = "COM11"
baud = 460800
address = 0x2e1000 # 修改为你的烧录地址
file_path = r"D:\esp\WorkSpace\esp32c3-usb_serial\tools\target_esp32s3.bin" # 修改为你的文件路径
flash_file(chip, port, baud, address, file_path)