初始代码,基本实现功能
This commit is contained in:
commit
bd87790bf8
6
CMakeLists.txt
Executable file
6
CMakeLists.txt
Executable file
@ -0,0 +1,6 @@
|
||||
# The following lines of boilerplate have to be in your project's CMakeLists
|
||||
# in this exact order for cmake to work correctly
|
||||
cmake_minimum_required(VERSION 3.16)
|
||||
|
||||
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
|
||||
project(usb_serial_jtag_echo)
|
||||
60
README.md
Executable file
60
README.md
Executable file
@ -0,0 +1,60 @@
|
||||
| Supported Targets | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-P4 | ESP32-S3 |
|
||||
| ----------------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# USB SERIAL JTAG Echo Example
|
||||
|
||||
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
||||
|
||||
This example demonstrates how to utilize USB_SERIAL_JTAG interfaces by echoing back to the sender any data received on USB_SERIAL_JTAG.
|
||||
|
||||
## How to use example
|
||||
|
||||
### Hardware Required
|
||||
|
||||
The example can be run on development board that supports usb_serial_jtag, that is based on the Espressif SoC. The board shall be connected to a computer with a single USB cable for flashing and monitoring with UART port. The usb_serial_jtag port on board can be be connected to computer with another USB cable to get the echo.
|
||||
|
||||
### Configure the project
|
||||
|
||||
Use the command below to configure project using Kconfig menu as showed in the table above.
|
||||
The default Kconfig values can be changed such as disable the `ESP_CONSOLE_SECONDARY_USB_SERIAL_JTAG`
|
||||
```
|
||||
idf.py menuconfig
|
||||
```
|
||||
|
||||
### Build and Flash
|
||||
|
||||
Build the project and flash it to the board, then run monitor tool to view serial output:
|
||||
|
||||
```
|
||||
idf.py -p PORT flash monitor
|
||||
```
|
||||
|
||||
(To exit the serial monitor, type ``Ctrl-]``.)
|
||||
|
||||
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
||||
|
||||
## Example Output
|
||||
|
||||
Type some characters in the terminal connected to the external serial interface. As result you should see echo in the same terminal which you used for typing the characters.
|
||||
|
||||
For example, If I type `hi espressif`, `See you again!`, `Echo a very long buffer. Assume this buffer is very large and you can see whole buffer`
|
||||
|
||||
And you can get the log with:
|
||||
|
||||
```
|
||||
I (296) main_task: Started on CPU0
|
||||
I (296) main_task: Calling app_main()
|
||||
I (296) main_task: Returned from app_main()
|
||||
I (13346) Recv str: : 0x408117b8 68 69 20 65 73 70 72 65 73 73 69 66 0d 0a |hi espressif..|
|
||||
I (16606) Recv str: : 0x408117b8 53 65 65 20 79 6f 75 20 61 67 61 69 6e 21 0d 0a |See you again!..|
|
||||
I (18726) Recv str: : 0x408117b8 45 63 68 6f 20 61 20 76 65 72 79 20 6c 6f 6e 67 |Echo a very long|
|
||||
I (18726) Recv str: : 0x408117c8 20 62 75 66 66 65 72 2e 20 41 73 73 75 6d 65 20 | buffer. Assume |
|
||||
I (18726) Recv str: : 0x408117d8 74 68 69 73 20 62 75 66 66 65 72 20 69 73 20 76 |this buffer is v|
|
||||
I (18736) Recv str: : 0x408117e8 65 72 79 20 6c 61 72 67 65 20 61 6e 64 20 79 6f |ery large and yo|
|
||||
I (18746) Recv str: : 0x408117b8 75 20 63 61 6e 20 73 65 65 20 77 68 6f 6c 65 20 |u can see whole |
|
||||
I (18756) Recv str: : 0x408117c8 62 75 66 66 65 72 0d 0a |buffer..|
|
||||
```
|
||||
|
||||
## Troubleshooting
|
||||
|
||||
Note that you are not supposed to see the echo in the terminal if usb_serial_jtag port is used for flashing and monitoring.
|
||||
2
main/CMakeLists.txt
Executable file
2
main/CMakeLists.txt
Executable file
@ -0,0 +1,2 @@
|
||||
idf_component_register(SRCS "usb_serial_echo_main.c"
|
||||
INCLUDE_DIRS ".")
|
||||
427
main/usb_serial_echo_main.c
Executable file
427
main/usb_serial_echo_main.c
Executable file
@ -0,0 +1,427 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Unlicense OR CC0-1.0
|
||||
*/
|
||||
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/task.h"
|
||||
#include "driver/usb_serial_jtag.h"
|
||||
#include "sdkconfig.h"
|
||||
#include "esp_log.h"
|
||||
#include "esp_check.h"
|
||||
#include "freertos/queue.h"
|
||||
#include "driver/uart.h"
|
||||
#include "freertos/event_groups.h"
|
||||
#include "esp_system.h"
|
||||
#include "esp_wifi.h"
|
||||
#include "esp_event.h"
|
||||
#include "nvs_flash.h"
|
||||
|
||||
#include "lwip/err.h"
|
||||
#include "lwip/sockets.h"
|
||||
#include "lwip/sys.h"
|
||||
#include <lwip/netdb.h>
|
||||
|
||||
static const char *TAG = "uart_events";
|
||||
|
||||
#define EXAMPLE_ESP_WIFI_SSID "RONGTA"
|
||||
#define EXAMPLE_ESP_WIFI_PASS "rongta305"
|
||||
#define EXAMPLE_ESP_MAXIMUM_RETRY 5
|
||||
|
||||
#define EX_UART_NUM UART_NUM_0
|
||||
#define PATTERN_CHR_NUM (3) /*!< Set the number of consecutive and identical characters received by receiver which defines a UART pattern*/
|
||||
|
||||
#define BUF_SIZE (1024)
|
||||
#define ECHO_TASK_STACK_SIZE (4096)
|
||||
|
||||
#define RD_BUF_SIZE (BUF_SIZE)
|
||||
static QueueHandle_t uart0_queue;
|
||||
/* FreeRTOS event group to signal when we are connected*/
|
||||
static EventGroupHandle_t s_wifi_event_group;
|
||||
|
||||
static int s_retry_num = 0;
|
||||
|
||||
#define WIFI_CONNECTED_BIT BIT0
|
||||
#define WIFI_FAIL_BIT BIT1
|
||||
|
||||
|
||||
static void event_handler(void* arg, esp_event_base_t event_base,
|
||||
int32_t event_id, void* event_data)
|
||||
{
|
||||
if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_START) {
|
||||
esp_wifi_connect();
|
||||
} else if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_DISCONNECTED) {
|
||||
if (s_retry_num < EXAMPLE_ESP_MAXIMUM_RETRY) {
|
||||
esp_wifi_connect();
|
||||
s_retry_num++;
|
||||
ESP_LOGI(TAG, "retry to connect to the AP");
|
||||
} else {
|
||||
xEventGroupSetBits(s_wifi_event_group, WIFI_FAIL_BIT);
|
||||
}
|
||||
ESP_LOGI(TAG,"connect to the AP fail");
|
||||
} else if (event_base == IP_EVENT && event_id == IP_EVENT_STA_GOT_IP) {
|
||||
ip_event_got_ip_t* event = (ip_event_got_ip_t*) event_data;
|
||||
ESP_LOGI(TAG, "got ip:" IPSTR, IP2STR(&event->ip_info.ip));
|
||||
s_retry_num = 0;
|
||||
xEventGroupSetBits(s_wifi_event_group, WIFI_CONNECTED_BIT);
|
||||
}
|
||||
}
|
||||
|
||||
void wifi_init_sta(void)
|
||||
{
|
||||
s_wifi_event_group = xEventGroupCreate();
|
||||
|
||||
esp_netif_create_default_wifi_sta();
|
||||
|
||||
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
|
||||
ESP_ERROR_CHECK(esp_wifi_init(&cfg));
|
||||
|
||||
esp_event_handler_instance_t instance_any_id;
|
||||
esp_event_handler_instance_t instance_got_ip;
|
||||
ESP_ERROR_CHECK(esp_event_handler_instance_register(WIFI_EVENT,
|
||||
ESP_EVENT_ANY_ID,
|
||||
&event_handler,
|
||||
NULL,
|
||||
&instance_any_id));
|
||||
ESP_ERROR_CHECK(esp_event_handler_instance_register(IP_EVENT,
|
||||
IP_EVENT_STA_GOT_IP,
|
||||
&event_handler,
|
||||
NULL,
|
||||
&instance_got_ip));
|
||||
|
||||
wifi_config_t wifi_config = {
|
||||
.sta = {
|
||||
.ssid = EXAMPLE_ESP_WIFI_SSID,
|
||||
.password = EXAMPLE_ESP_WIFI_PASS,
|
||||
/* Authmode threshold resets to WPA2 as default if password matches WPA2 standards (password len => 8).
|
||||
* If you want to connect the device to deprecated WEP/WPA networks, Please set the threshold value
|
||||
* to WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK and set the password with length and format matching to
|
||||
* WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK standards.
|
||||
*/
|
||||
.threshold.authmode = WIFI_AUTH_WPA2_PSK,
|
||||
.sae_pwe_h2e = WPA3_SAE_PWE_BOTH,
|
||||
.sae_h2e_identifier = "",
|
||||
},
|
||||
};
|
||||
ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA) );
|
||||
ESP_ERROR_CHECK(esp_wifi_set_config(WIFI_IF_STA, &wifi_config) );
|
||||
ESP_ERROR_CHECK(esp_wifi_start() );
|
||||
|
||||
ESP_LOGI(TAG, "wifi_init_sta finished.");
|
||||
|
||||
/* Waiting until either the connection is established (WIFI_CONNECTED_BIT) or connection failed for the maximum
|
||||
* number of re-tries (WIFI_FAIL_BIT). The bits are set by event_handler() (see above) */
|
||||
EventBits_t bits = xEventGroupWaitBits(s_wifi_event_group,
|
||||
WIFI_CONNECTED_BIT | WIFI_FAIL_BIT,
|
||||
pdFALSE,
|
||||
pdFALSE,
|
||||
portMAX_DELAY);
|
||||
|
||||
/* xEventGroupWaitBits() returns the bits before the call returned, hence we can test which event actually
|
||||
* happened. */
|
||||
if (bits & WIFI_CONNECTED_BIT) {
|
||||
ESP_LOGI(TAG, "connected to ap SSID:%s password:%s",
|
||||
EXAMPLE_ESP_WIFI_SSID, EXAMPLE_ESP_WIFI_PASS);
|
||||
} else if (bits & WIFI_FAIL_BIT) {
|
||||
ESP_LOGI(TAG, "Failed to connect to SSID:%s, password:%s",
|
||||
EXAMPLE_ESP_WIFI_SSID, EXAMPLE_ESP_WIFI_PASS);
|
||||
} else {
|
||||
ESP_LOGE(TAG, "UNEXPECTED EVENT");
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#define PORT 23
|
||||
#define KEEPALIVE_IDLE 5
|
||||
#define KEEPALIVE_INTERVAL 5
|
||||
#define KEEPALIVE_COUNT 3
|
||||
|
||||
|
||||
static void do_retransmit(const int sock)
|
||||
{
|
||||
int len;
|
||||
char rx_buffer[128];
|
||||
|
||||
do {
|
||||
len = recv(sock, rx_buffer, sizeof(rx_buffer) - 1, 0);
|
||||
if (len < 0) {
|
||||
ESP_LOGE(TAG, "Error occurred during receiving: errno %d", errno);
|
||||
} else if (len == 0) {
|
||||
ESP_LOGW(TAG, "Connection closed");
|
||||
} else {
|
||||
rx_buffer[len] = 0; // Null-terminate whatever is received and treat it like a string
|
||||
ESP_LOGI(TAG, "Received %d bytes: %s", len, rx_buffer);
|
||||
// uart_write_bytes(EX_UART_NUM, (const char *) rx_buffer, len);
|
||||
// send() can return less bytes than supplied length.
|
||||
// Walk-around for robust implementation.
|
||||
// int to_write = len;
|
||||
// while (to_write > 0) {
|
||||
// int written = uart_write_bytes(EX_UART_NUM, (const char *) (rx_buffer + (len - to_write)), to_write);
|
||||
// // int written = send(sock, rx_buffer + (len - to_write), to_write, 0);
|
||||
// // if (written < 0) {
|
||||
// // ESP_LOGE(TAG, "Error occurred during sending: errno %d", errno);
|
||||
// // // Failed to retransmit, giving up
|
||||
// // return;
|
||||
// // }
|
||||
// to_write -= written;
|
||||
// }
|
||||
}
|
||||
} while (len > 0);
|
||||
}
|
||||
static int sock;
|
||||
static void tcp_server_task(void *pvParameters)
|
||||
{
|
||||
char addr_str[128];
|
||||
int addr_family = (int)pvParameters;
|
||||
int ip_protocol = 0;
|
||||
int keepAlive = 1;
|
||||
int keepIdle = KEEPALIVE_IDLE;
|
||||
int keepInterval = KEEPALIVE_INTERVAL;
|
||||
int keepCount = KEEPALIVE_COUNT;
|
||||
struct sockaddr_storage dest_addr;
|
||||
|
||||
#ifdef CONFIG_LWIP_IPV4
|
||||
if (addr_family == AF_INET) {
|
||||
struct sockaddr_in *dest_addr_ip4 = (struct sockaddr_in *)&dest_addr;
|
||||
dest_addr_ip4->sin_addr.s_addr = htonl(INADDR_ANY);
|
||||
dest_addr_ip4->sin_family = AF_INET;
|
||||
dest_addr_ip4->sin_port = htons(PORT);
|
||||
ip_protocol = IPPROTO_IP;
|
||||
}
|
||||
#endif
|
||||
#ifdef CONFIG_EXAMPLE_IPV6
|
||||
if (addr_family == AF_INET6) {
|
||||
struct sockaddr_in6 *dest_addr_ip6 = (struct sockaddr_in6 *)&dest_addr;
|
||||
bzero(&dest_addr_ip6->sin6_addr.un, sizeof(dest_addr_ip6->sin6_addr.un));
|
||||
dest_addr_ip6->sin6_family = AF_INET6;
|
||||
dest_addr_ip6->sin6_port = htons(PORT);
|
||||
ip_protocol = IPPROTO_IPV6;
|
||||
}
|
||||
#endif
|
||||
|
||||
int listen_sock = socket(addr_family, SOCK_STREAM, ip_protocol);
|
||||
if (listen_sock < 0) {
|
||||
ESP_LOGE(TAG, "Unable to create socket: errno %d", errno);
|
||||
vTaskDelete(NULL);
|
||||
return;
|
||||
}
|
||||
int opt = 1;
|
||||
setsockopt(listen_sock, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt));
|
||||
#if defined(CONFIG_EXAMPLE_IPV4) && defined(CONFIG_EXAMPLE_IPV6)
|
||||
// Note that by default IPV6 binds to both protocols, it is must be disabled
|
||||
// if both protocols used at the same time (used in CI)
|
||||
setsockopt(listen_sock, IPPROTO_IPV6, IPV6_V6ONLY, &opt, sizeof(opt));
|
||||
#endif
|
||||
|
||||
ESP_LOGI(TAG, "Socket created");
|
||||
|
||||
int err = bind(listen_sock, (struct sockaddr *)&dest_addr, sizeof(dest_addr));
|
||||
if (err != 0) {
|
||||
ESP_LOGE(TAG, "Socket unable to bind: errno %d", errno);
|
||||
ESP_LOGE(TAG, "IPPROTO: %d", addr_family);
|
||||
goto CLEAN_UP;
|
||||
}
|
||||
ESP_LOGI(TAG, "Socket bound, port %d", PORT);
|
||||
|
||||
err = listen(listen_sock, 1);
|
||||
if (err != 0) {
|
||||
ESP_LOGE(TAG, "Error occurred during listen: errno %d", errno);
|
||||
goto CLEAN_UP;
|
||||
}
|
||||
|
||||
while (1) {
|
||||
|
||||
ESP_LOGI(TAG, "Socket listening");
|
||||
|
||||
struct sockaddr_storage source_addr; // Large enough for both IPv4 or IPv6
|
||||
socklen_t addr_len = sizeof(source_addr);
|
||||
sock = accept(listen_sock, (struct sockaddr *)&source_addr, &addr_len);
|
||||
if (sock < 0) {
|
||||
ESP_LOGE(TAG, "Unable to accept connection: errno %d", errno);
|
||||
break;
|
||||
}
|
||||
|
||||
// Set tcp keepalive option
|
||||
setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE, &keepAlive, sizeof(int));
|
||||
setsockopt(sock, IPPROTO_TCP, TCP_KEEPIDLE, &keepIdle, sizeof(int));
|
||||
setsockopt(sock, IPPROTO_TCP, TCP_KEEPINTVL, &keepInterval, sizeof(int));
|
||||
setsockopt(sock, IPPROTO_TCP, TCP_KEEPCNT, &keepCount, sizeof(int));
|
||||
// Convert ip address to string
|
||||
#ifdef CONFIG_EXAMPLE_IPV4
|
||||
if (source_addr.ss_family == PF_INET) {
|
||||
inet_ntoa_r(((struct sockaddr_in *)&source_addr)->sin_addr, addr_str, sizeof(addr_str) - 1);
|
||||
}
|
||||
#endif
|
||||
#ifdef CONFIG_EXAMPLE_IPV6
|
||||
if (source_addr.ss_family == PF_INET6) {
|
||||
inet6_ntoa_r(((struct sockaddr_in6 *)&source_addr)->sin6_addr, addr_str, sizeof(addr_str) - 1);
|
||||
}
|
||||
#endif
|
||||
ESP_LOGI(TAG, "Socket accepted ip address: %s", addr_str);
|
||||
|
||||
do_retransmit(sock);
|
||||
|
||||
shutdown(sock, 0);
|
||||
close(sock);
|
||||
}
|
||||
|
||||
CLEAN_UP:
|
||||
close(listen_sock);
|
||||
vTaskDelete(NULL);
|
||||
}
|
||||
|
||||
|
||||
static void echo_task(void *arg)
|
||||
{
|
||||
// Configure USB SERIAL JTAG
|
||||
usb_serial_jtag_driver_config_t usb_serial_jtag_config = {
|
||||
.rx_buffer_size = BUF_SIZE,
|
||||
.tx_buffer_size = BUF_SIZE,
|
||||
};
|
||||
|
||||
ESP_ERROR_CHECK(usb_serial_jtag_driver_install(&usb_serial_jtag_config));
|
||||
ESP_LOGI("usb_serial_jtag echo", "USB_SERIAL_JTAG init done");
|
||||
|
||||
// Configure a temporary buffer for the incoming data
|
||||
uint8_t *data = (uint8_t *) malloc(BUF_SIZE);
|
||||
if (data == NULL) {
|
||||
ESP_LOGE("usb_serial_jtag echo", "no memory for data");
|
||||
return;
|
||||
}
|
||||
|
||||
while (1) {
|
||||
|
||||
int len = usb_serial_jtag_read_bytes(data, (BUF_SIZE - 1), 20 / portTICK_PERIOD_MS);
|
||||
|
||||
// Write data back to the USB SERIAL JTAG
|
||||
if (len) {
|
||||
// usb_serial_jtag_write_bytes((const char *) data, len, 20 / portTICK_PERIOD_MS);
|
||||
uart_write_bytes(EX_UART_NUM, (const char *) data, len);
|
||||
data[len] = '\0';
|
||||
// ESP_LOG_BUFFER_HEXDUMP("Recv str: ", data, len, ESP_LOG_INFO);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static void uart_event_task(void *pvParameters)
|
||||
{
|
||||
uart_event_t event;
|
||||
size_t buffered_size;
|
||||
uint8_t* dtmp = (uint8_t*) malloc(RD_BUF_SIZE);
|
||||
for (;;) {
|
||||
//Waiting for UART event.
|
||||
if (xQueueReceive(uart0_queue, (void *)&event, (TickType_t)portMAX_DELAY)) {
|
||||
bzero(dtmp, RD_BUF_SIZE);
|
||||
switch (event.type) {
|
||||
//Event of UART receving data
|
||||
/*We'd better handler data event fast, there would be much more data events than
|
||||
other types of events. If we take too much time on data event, the queue might
|
||||
be full.*/
|
||||
case UART_DATA:
|
||||
uart_read_bytes(EX_UART_NUM, dtmp, event.size, portMAX_DELAY);
|
||||
ESP_LOGI(TAG, "read_bytes:%d",event.size);
|
||||
// uart_write_bytes(EX_UART_NUM, (const char*) dtmp, event.size);
|
||||
usb_serial_jtag_write_bytes((const char*) dtmp, event.size, 20 / portTICK_PERIOD_MS);
|
||||
// int to_write = event.size;
|
||||
// while (to_write > 0) {
|
||||
// int written = send(sock, dtmp + (event.size - to_write), to_write, 0);
|
||||
// if (written < 0) {
|
||||
// ESP_LOGE(TAG, "Error occurred during sending: errno %d", errno);
|
||||
// // Failed to retransmit, giving up
|
||||
// return;
|
||||
// }
|
||||
// to_write -= written;
|
||||
// }
|
||||
break;
|
||||
//Event of HW FIFO overflow detected
|
||||
case UART_FIFO_OVF:
|
||||
ESP_LOGI(TAG, "hw fifo overflow");
|
||||
// If fifo overflow happened, you should consider adding flow control for your application.
|
||||
// The ISR has already reset the rx FIFO,
|
||||
// As an example, we directly flush the rx buffer here in order to read more data.
|
||||
uart_flush_input(EX_UART_NUM);
|
||||
xQueueReset(uart0_queue);
|
||||
break;
|
||||
//Event of UART ring buffer full
|
||||
case UART_BUFFER_FULL:
|
||||
ESP_LOGI(TAG, "ring buffer full");
|
||||
// If buffer full happened, you should consider increasing your buffer size
|
||||
// As an example, we directly flush the rx buffer here in order to read more data.
|
||||
uart_flush_input(EX_UART_NUM);
|
||||
xQueueReset(uart0_queue);
|
||||
break;
|
||||
//Event of UART RX break detected
|
||||
case UART_BREAK:
|
||||
ESP_LOGI(TAG, "uart rx break");
|
||||
break;
|
||||
//Event of UART parity check error
|
||||
case UART_PARITY_ERR:
|
||||
ESP_LOGI(TAG, "uart parity error");
|
||||
break;
|
||||
//Event of UART frame error
|
||||
case UART_FRAME_ERR:
|
||||
ESP_LOGI(TAG, "uart frame error");
|
||||
break;
|
||||
//UART_PATTERN_DET
|
||||
case UART_PATTERN_DET:
|
||||
uart_get_buffered_data_len(EX_UART_NUM, &buffered_size);
|
||||
int pos = uart_pattern_pop_pos(EX_UART_NUM);
|
||||
ESP_LOGI(TAG, "[UART PATTERN DETECTED] pos: %d, buffered size: %d", pos, buffered_size);
|
||||
if (pos == -1) {
|
||||
// There used to be a UART_PATTERN_DET event, but the pattern position queue is full so that it can not
|
||||
// record the position. We should set a larger queue size.
|
||||
// As an example, we directly flush the rx buffer here.
|
||||
uart_flush_input(EX_UART_NUM);
|
||||
} else {
|
||||
uart_read_bytes(EX_UART_NUM, dtmp, pos, 100 / portTICK_PERIOD_MS);
|
||||
uint8_t pat[PATTERN_CHR_NUM + 1];
|
||||
memset(pat, 0, sizeof(pat));
|
||||
uart_read_bytes(EX_UART_NUM, pat, PATTERN_CHR_NUM, 100 / portTICK_PERIOD_MS);
|
||||
ESP_LOGI(TAG, "read data: %s", dtmp);
|
||||
ESP_LOGI(TAG, "read pat : %s", pat);
|
||||
}
|
||||
break;
|
||||
//Others
|
||||
default:
|
||||
ESP_LOGI(TAG, "uart event type: %d", event.type);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
free(dtmp);
|
||||
dtmp = NULL;
|
||||
vTaskDelete(NULL);
|
||||
}
|
||||
|
||||
void app_main(void)
|
||||
{
|
||||
|
||||
ESP_ERROR_CHECK(nvs_flash_init());
|
||||
ESP_ERROR_CHECK(esp_netif_init());
|
||||
ESP_ERROR_CHECK(esp_event_loop_create_default());
|
||||
/* Configure parameters of an UART driver,
|
||||
* communication pins and install the driver */
|
||||
uart_config_t uart_config = {
|
||||
.baud_rate = 1500000,
|
||||
.data_bits = UART_DATA_8_BITS,
|
||||
.parity = UART_PARITY_DISABLE,
|
||||
.stop_bits = UART_STOP_BITS_1,
|
||||
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
||||
.source_clk = UART_SCLK_DEFAULT,
|
||||
};
|
||||
// ESP_ERROR_CHECK(uart_set_pin(UART_NUM_1, 4, 5, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE));
|
||||
//Install UART driver, and get the queue.
|
||||
uart_driver_install(EX_UART_NUM, BUF_SIZE * 2, BUF_SIZE * 2, 20, &uart0_queue, 0);
|
||||
uart_param_config(EX_UART_NUM, &uart_config);
|
||||
xTaskCreate(echo_task, "USB SERIAL JTAG_echo_task", ECHO_TASK_STACK_SIZE, NULL, 10, NULL);
|
||||
//Create a task to handler UART event from ISR
|
||||
xTaskCreate(uart_event_task, "uart_event_task", 2048, NULL, 12, NULL);
|
||||
|
||||
// ESP_LOGI(TAG, "ESP_WIFI_MODE_STA");
|
||||
// wifi_init_sta();
|
||||
|
||||
// xTaskCreate(tcp_server_task, "tcp_server", 4096, (void*)AF_INET, 5, NULL);
|
||||
}
|
||||
49
pytest_usj_echo_example.py
Executable file
49
pytest_usj_echo_example.py
Executable file
@ -0,0 +1,49 @@
|
||||
# SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
|
||||
# SPDX-License-Identifier: CC0-1.0
|
||||
|
||||
from time import sleep
|
||||
|
||||
import pytest
|
||||
import serial
|
||||
import serial.tools.list_ports
|
||||
from pytest_embedded import Dut
|
||||
|
||||
|
||||
@pytest.mark.esp32c6 # usb_serial_jtag is very similar, test C6 is enough.
|
||||
@pytest.mark.usj_device
|
||||
def test_usb_device_serial_example(dut: Dut) -> None:
|
||||
dut.expect_exact('USB_SERIAL_JTAG init done')
|
||||
sleep(2)
|
||||
|
||||
ports = list(serial.tools.list_ports.comports())
|
||||
for p in ports:
|
||||
if (p.device == '/dev/ttyACM0'): # Get the usb_serial_jtag port
|
||||
with serial.Serial(p.device) as s:
|
||||
s.write(b'hi, espressif\n')
|
||||
sleep(1)
|
||||
dut.expect_exact('hi, espressif')
|
||||
res = s.readline()
|
||||
assert b'hi, espressif' in res
|
||||
s.write(b'See you again!\n')
|
||||
sleep(1)
|
||||
dut.expect_exact('See you again!')
|
||||
res = s.readline()
|
||||
assert b'See you again!' in res
|
||||
s.write(b'Echo a very long buffer. Assume this buffer is very large and you can see whole buffer\n')
|
||||
sleep(1)
|
||||
dut.expect_exact('Echo a very long') # 16 bytes a line because we use `ESP_LOG_BUFFER_HEXDUMP` in code.
|
||||
dut.expect_exact(' buffer. Assume ')
|
||||
dut.expect_exact('this buffer is v')
|
||||
dut.expect_exact('ery large and yo')
|
||||
dut.expect_exact('u can see whole ')
|
||||
dut.expect_exact('buffer')
|
||||
res = s.readline()
|
||||
assert b'Echo a very long buffer. Assume this buffer is very large and you can see whole buffer' in res
|
||||
s.write(b'64 bytes buffer:-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-\n')
|
||||
sleep(1)
|
||||
res = s.readline()
|
||||
assert b'64 bytes buffer:-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-' in res
|
||||
|
||||
return
|
||||
|
||||
raise Exception('usb_serial_jtag port not found')
|
||||
1
sdkconfig.defaults
Executable file
1
sdkconfig.defaults
Executable file
@ -0,0 +1 @@
|
||||
CONFIG_ESP_CONSOLE_SECONDARY_NONE=y
|
||||
1953
sdkconfig.old
Normal file
1953
sdkconfig.old
Normal file
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user