382 lines
16 KiB
C
382 lines
16 KiB
C
#include <stdlib.h>
|
|
#include <sys/cdefs.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "esp_lcd_panel_interface.h"
|
|
#include "esp_lcd_panel_io.h"
|
|
#include "esp_lcd_panel_vendor.h"
|
|
#include "esp_lcd_panel_ops.h"
|
|
#include "esp_lcd_panel_commands.h"
|
|
#include "driver/gpio.h"
|
|
#include "esp_log.h"
|
|
#include "esp_check.h"
|
|
|
|
#include "esp_lcd_st7735.h"
|
|
|
|
static const char *TAG = "st7735";
|
|
|
|
static esp_err_t panel_st7735_del(esp_lcd_panel_t *panel);
|
|
static esp_err_t panel_st7735_reset(esp_lcd_panel_t *panel);
|
|
static esp_err_t panel_st7735_init(esp_lcd_panel_t *panel);
|
|
static esp_err_t panel_st7735_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data);
|
|
static esp_err_t panel_st7735_invert_color(esp_lcd_panel_t *panel, bool invert_color_data);
|
|
static esp_err_t panel_st7735_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y);
|
|
static esp_err_t panel_st7735_swap_xy(esp_lcd_panel_t *panel, bool swap_axes);
|
|
static esp_err_t panel_st7735_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap);
|
|
static esp_err_t panel_st7735_disp_on_off(esp_lcd_panel_t *panel, bool off);
|
|
|
|
typedef struct
|
|
{
|
|
esp_lcd_panel_t base;
|
|
esp_lcd_panel_io_handle_t io;
|
|
int reset_gpio_num;
|
|
bool reset_level;
|
|
int x_gap;
|
|
int y_gap;
|
|
uint8_t fb_bits_per_pixel;
|
|
uint8_t madctl_val; // save current value of LCD_CMD_MADCTL register
|
|
uint8_t colmod_val; // save current value of LCD_CMD_COLMOD register
|
|
const st7735_lcd_init_cmd_t *init_cmds;
|
|
uint16_t init_cmds_size;
|
|
} st7735_panel_t;
|
|
|
|
esp_err_t esp_lcd_new_panel_st7735(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
st7735_panel_t *st7735 = NULL;
|
|
gpio_config_t io_conf = {0};
|
|
|
|
ESP_GOTO_ON_FALSE(io && panel_dev_config && ret_panel, ESP_ERR_INVALID_ARG, err, TAG, "invalid argument");
|
|
st7735 = (st7735_panel_t *)calloc(1, sizeof(st7735_panel_t));
|
|
ESP_GOTO_ON_FALSE(st7735, ESP_ERR_NO_MEM, err, TAG, "no mem for st7735 panel");
|
|
|
|
if (panel_dev_config->reset_gpio_num >= 0)
|
|
{
|
|
io_conf.mode = GPIO_MODE_OUTPUT;
|
|
io_conf.pin_bit_mask = 1ULL << panel_dev_config->reset_gpio_num;
|
|
ESP_GOTO_ON_ERROR(gpio_config(&io_conf), err, TAG, "configure GPIO for RST line failed");
|
|
}
|
|
|
|
switch (panel_dev_config->rgb_endian)
|
|
{
|
|
case LCD_RGB_ENDIAN_RGB:
|
|
st7735->madctl_val = 0;
|
|
break;
|
|
case LCD_RGB_ENDIAN_BGR:
|
|
st7735->madctl_val |= LCD_CMD_BGR_BIT;
|
|
break;
|
|
default:
|
|
ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported rgb endian");
|
|
break;
|
|
}
|
|
|
|
switch (panel_dev_config->bits_per_pixel)
|
|
{
|
|
case 16: // RGB565
|
|
st7735->colmod_val = 0x55;
|
|
st7735->fb_bits_per_pixel = 16;
|
|
break;
|
|
case 18: // RGB666
|
|
st7735->colmod_val = 0x66;
|
|
// each color component (R/G/B) should occupy the 6 high bits of a byte, which means 3 full bytes are required for a pixel
|
|
st7735->fb_bits_per_pixel = 24;
|
|
break;
|
|
default:
|
|
ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported pixel width");
|
|
break;
|
|
}
|
|
|
|
st7735->io = io;
|
|
st7735->reset_gpio_num = panel_dev_config->reset_gpio_num;
|
|
st7735->reset_level = panel_dev_config->flags.reset_active_high;
|
|
if (panel_dev_config->vendor_config)
|
|
{
|
|
st7735->init_cmds = ((st7735_vendor_config_t *)panel_dev_config->vendor_config)->init_cmds;
|
|
st7735->init_cmds_size = ((st7735_vendor_config_t *)panel_dev_config->vendor_config)->init_cmds_size;
|
|
}
|
|
st7735->base.del = panel_st7735_del;
|
|
st7735->base.reset = panel_st7735_reset;
|
|
st7735->base.init = panel_st7735_init;
|
|
st7735->base.draw_bitmap = panel_st7735_draw_bitmap;
|
|
st7735->base.invert_color = panel_st7735_invert_color;
|
|
st7735->base.set_gap = panel_st7735_set_gap;
|
|
st7735->base.mirror = panel_st7735_mirror;
|
|
st7735->base.swap_xy = panel_st7735_swap_xy;
|
|
// #if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 0, 0)
|
|
// st7735->base.disp_off = panel_st7735_disp_on_off;
|
|
// #else
|
|
// st7735->base.disp_on_off = panel_st7735_disp_on_off;
|
|
// #endif
|
|
st7735->base.disp_on_off = panel_st7735_disp_on_off;
|
|
*ret_panel = &(st7735->base);
|
|
ESP_LOGD(TAG, "new st7735 panel @%p", st7735);
|
|
ESP_LOGI(TAG, "LCD panel create success");
|
|
|
|
return ESP_OK;
|
|
|
|
err:
|
|
if (st7735)
|
|
{
|
|
if (panel_dev_config->reset_gpio_num >= 0)
|
|
{
|
|
gpio_reset_pin(panel_dev_config->reset_gpio_num);
|
|
}
|
|
free(st7735);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static esp_err_t panel_st7735_del(esp_lcd_panel_t *panel)
|
|
{
|
|
st7735_panel_t *st7735 = __containerof(panel, st7735_panel_t, base);
|
|
|
|
if (st7735->reset_gpio_num >= 0)
|
|
{
|
|
gpio_reset_pin(st7735->reset_gpio_num);
|
|
}
|
|
ESP_LOGD(TAG, "del st7735 panel @%p", st7735);
|
|
free(st7735);
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_st7735_reset(esp_lcd_panel_t *panel)
|
|
{
|
|
st7735_panel_t *st7735 = __containerof(panel, st7735_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = st7735->io;
|
|
ESP_LOGD(TAG, "reset st7735 panel @%p", st7735);
|
|
// perform hardware reset
|
|
if (st7735->reset_gpio_num >= 0)
|
|
{
|
|
gpio_set_level(st7735->reset_gpio_num, st7735->reset_level);
|
|
vTaskDelay(pdMS_TO_TICKS(10));
|
|
gpio_set_level(st7735->reset_gpio_num, !st7735->reset_level);
|
|
vTaskDelay(pdMS_TO_TICKS(10));
|
|
}
|
|
else
|
|
{ // perform software reset
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_SWRESET, NULL, 0), TAG, "send command failed");
|
|
vTaskDelay(pdMS_TO_TICKS(20)); // spec, wait at least 5ms before sending new command
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
typedef struct
|
|
{
|
|
uint8_t cmd;
|
|
uint8_t data[16];
|
|
uint8_t data_bytes; // Length of data in above data array; 0xFF = end of cmds.
|
|
} lcd_init_cmd_t;
|
|
|
|
const uint8_t TFT_INIT_DELAY = 0;
|
|
|
|
static const st7735_lcd_init_cmd_t vendor_specific_init_default[] = {
|
|
{ST7735_SWRESET, (uint8_t[]){0x00}, 1, 0}, // Software reset, 0 args, w/delay 150
|
|
{ST7735_SLPOUT, (uint8_t[]){0x00}, 1, 0}, // Out of sleep mode, 0 args, w/delay 500
|
|
{ST7735_FRMCTR1, (uint8_t[]){0x05, 0x3A, 0x3A}, 3, 0}, // Frame rate ctrl - normal mode, 3 args: Rate = fosc/(1x2+40) * (LINE+2C+2D)
|
|
{ST7735_FRMCTR2, (uint8_t[]){0x05, 0x3A, 0x3A}, 3, 0}, // Frame rate control - idle mode, 3 args:Rate = fosc/(1x2+40) * (LINE+2C+2D)
|
|
{ST7735_FRMCTR3, (uint8_t[]){0x05, 0x3A, 0x3A, 0x05, 0x3A, 0x3A}, 6, 0}, // Frame rate ctrl - partial mode, 6 args:Dot inversion mode. Line inversion mode
|
|
{ST7735_INVCTR, (uint8_t[]){0x03}, 1, 0}, // Display inversion ctrl, 1 arg, no delay:No inversion
|
|
{ST7735_PWCTR1, (uint8_t[]){0x62, 0x02, 0x04}, 3, 0}, // Power control, 3 args, no delay:-4.6V AUTO mode
|
|
{ST7735_PWCTR2, (uint8_t[]){0xC0}, 1, 0}, // Power control, 1 arg, no delay:VGH25 = 2.4C VGSEL = -10 VGH = 3 * AVDD
|
|
{ST7735_PWCTR3, (uint8_t[]){0x0D, 0x00}, 2, 0}, // Power control, 2 args, no delay: Opamp current small, Boost frequency
|
|
{ST7735_PWCTR4, (uint8_t[]){0x8D, 0x6A}, 2, 0}, // Power control, 2 args, no delay: BCLK/2, Opamp current small & Medium low
|
|
{ST7735_PWCTR5, (uint8_t[]){0x8D, 0xEE}, 2, 0}, // Power control, 2 args, no delay:
|
|
{ST7735_VMCTR1, (uint8_t[]){0x0E}, 1, 0}, // Power control, 1 arg, no delay:
|
|
{ST7735_INVON, (uint8_t[]){0x00}, 1, 0}, // set inverted mode
|
|
//{ST7735_INVOFF, {0}, 0}, // set non-inverted mode
|
|
{ST7735_COLMOD, (uint8_t[]){0x05}, 1, 0}, // set color mode, 1 arg, no delay: 16-bit color
|
|
{ST7735_GMCTRP1, (uint8_t[]){0x10, 0x0E, 0x02, 0x03, 0x0E, 0x07, 0x02, 0x07, 0x0A, 0x12, 0x27, 0x37, 0x00, 0x0D, 0x0E, 0x10}, 16, 0}, // 16 args, no delay:
|
|
{ST7735_GMCTRN1, (uint8_t[]){0x10, 0x0E, 0x03, 0x03, 0x0F, 0x06, 0x02, 0x08, 0x0A, 0x13, 0x26, 0x36, 0x00, 0x0D, 0x0E, 0x10}, 16, 0}, // 16 args, no delay:
|
|
{ST7735_NORON, (uint8_t[]){0x00}, 1, TFT_INIT_DELAY}, // Normal display on, no args, w/delay 10 ms delay
|
|
{ST7735_DISPON, (uint8_t[]){0x00}, 1, TFT_INIT_DELAY}, // Main screen turn on, no args w/delay 100 ms delay
|
|
};
|
|
|
|
static esp_err_t panel_st7735_init(esp_lcd_panel_t *panel)
|
|
{
|
|
st7735_panel_t *st7735 = __containerof(panel, st7735_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = st7735->io;
|
|
ESP_LOGI(TAG, "init st7735 panel @%p", st7735);
|
|
// LCD goes into sleep mode and display will be turned off after power on reset, exit sleep mode first
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_SLPOUT, NULL, 0), TAG, "send command failed");
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]){
|
|
st7735->madctl_val,
|
|
},
|
|
1),
|
|
TAG, "send command failed");
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_COLMOD, (uint8_t[]){
|
|
st7735->colmod_val,
|
|
},
|
|
1),
|
|
TAG, "send command failed");
|
|
|
|
const st7735_lcd_init_cmd_t *init_cmds = NULL;
|
|
uint16_t init_cmds_size = 0;
|
|
if (st7735->init_cmds)
|
|
{
|
|
init_cmds = st7735->init_cmds;
|
|
init_cmds_size = st7735->init_cmds_size;
|
|
}
|
|
else
|
|
{
|
|
init_cmds = vendor_specific_init_default;
|
|
init_cmds_size = sizeof(vendor_specific_init_default) / sizeof(st7735_lcd_init_cmd_t);
|
|
}
|
|
|
|
bool is_cmd_overwritten = false;
|
|
// ESP_LOGI(TAG, "Command Count == %d", init_cmds_size);
|
|
for (int i = 0; i < init_cmds_size; i++)
|
|
{
|
|
// ESP_LOGI(TAG, "cmd %02x", init_cmds[i].cmd);
|
|
// Check if the command has been used or conflicts with the internal
|
|
switch (init_cmds[i].cmd)
|
|
{
|
|
case LCD_CMD_MADCTL:
|
|
is_cmd_overwritten = true;
|
|
st7735->madctl_val = ((uint8_t *)init_cmds[i].data)[0];
|
|
break;
|
|
case LCD_CMD_COLMOD:
|
|
is_cmd_overwritten = true;
|
|
st7735->colmod_val = ((uint8_t *)init_cmds[i].data)[0];
|
|
break;
|
|
default:
|
|
is_cmd_overwritten = false;
|
|
break;
|
|
}
|
|
|
|
if (is_cmd_overwritten)
|
|
{
|
|
ESP_LOGW(TAG, "The %02Xh command has been used and will be overwritten by external initialization sequence", init_cmds[i].cmd);
|
|
}
|
|
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, init_cmds[i].cmd, init_cmds[i].data, init_cmds[i].data_bytes), TAG, "send command failed");
|
|
vTaskDelay(pdMS_TO_TICKS(init_cmds[i].delay_ms));
|
|
}
|
|
ESP_LOGI(TAG, "send init commands success");
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_st7735_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data)
|
|
{
|
|
st7735_panel_t *st7735 = __containerof(panel, st7735_panel_t, base);
|
|
assert((x_start < x_end) && (y_start < y_end) && "start position must be smaller than end position");
|
|
esp_lcd_panel_io_handle_t io = st7735->io;
|
|
|
|
x_start += st7735->x_gap;
|
|
x_end += st7735->x_gap;
|
|
y_start += st7735->y_gap;
|
|
y_end += st7735->y_gap;
|
|
|
|
// define an area of frame memory where MCU can access
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_CASET, (uint8_t[]){
|
|
(x_start >> 8) & 0xFF,
|
|
x_start & 0xFF,
|
|
((x_end - 1) >> 8) & 0xFF,
|
|
(x_end - 1) & 0xFF,
|
|
},
|
|
4),
|
|
TAG, "send command failed");
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_RASET, (uint8_t[]){
|
|
(y_start >> 8) & 0xFF,
|
|
y_start & 0xFF,
|
|
((y_end - 1) >> 8) & 0xFF,
|
|
(y_end - 1) & 0xFF,
|
|
},
|
|
4),
|
|
TAG, "send command failed");
|
|
// transfer frame buffer
|
|
size_t len = (x_end - x_start) * (y_end - y_start) * st7735->fb_bits_per_pixel / 8;
|
|
esp_lcd_panel_io_tx_color(io, LCD_CMD_RAMWR, color_data, len);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_st7735_invert_color(esp_lcd_panel_t *panel, bool invert_color_data)
|
|
{
|
|
st7735_panel_t *st7735 = __containerof(panel, st7735_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = st7735->io;
|
|
int command = 0;
|
|
if (invert_color_data)
|
|
{
|
|
command = LCD_CMD_INVON;
|
|
}
|
|
else
|
|
{
|
|
command = LCD_CMD_INVOFF;
|
|
}
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, command, NULL, 0), TAG, "send command failed");
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_st7735_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y)
|
|
{
|
|
st7735_panel_t *st7735 = __containerof(panel, st7735_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = st7735->io;
|
|
if (mirror_x)
|
|
{
|
|
st7735->madctl_val |= LCD_CMD_MX_BIT;
|
|
}
|
|
else
|
|
{
|
|
st7735->madctl_val &= ~LCD_CMD_MX_BIT;
|
|
}
|
|
if (mirror_y)
|
|
{
|
|
st7735->madctl_val |= LCD_CMD_MY_BIT;
|
|
}
|
|
else
|
|
{
|
|
st7735->madctl_val &= ~LCD_CMD_MY_BIT;
|
|
}
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]){st7735->madctl_val}, 1), TAG, "send command failed");
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_st7735_swap_xy(esp_lcd_panel_t *panel, bool swap_axes)
|
|
{
|
|
st7735_panel_t *st7735 = __containerof(panel, st7735_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = st7735->io;
|
|
if (swap_axes)
|
|
{
|
|
st7735->madctl_val |= LCD_CMD_MV_BIT;
|
|
}
|
|
else
|
|
{
|
|
st7735->madctl_val &= ~LCD_CMD_MV_BIT;
|
|
}
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]){st7735->madctl_val}, 1), TAG, "send command failed");
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_st7735_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap)
|
|
{
|
|
st7735_panel_t *st7735 = __containerof(panel, st7735_panel_t, base);
|
|
st7735->x_gap = x_gap;
|
|
st7735->y_gap = y_gap;
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_st7735_disp_on_off(esp_lcd_panel_t *panel, bool on_off)
|
|
{
|
|
st7735_panel_t *st7735 = __containerof(panel, st7735_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = st7735->io;
|
|
int command = 0;
|
|
|
|
#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 0, 0)
|
|
on_off = !on_off;
|
|
#endif
|
|
|
|
if (on_off)
|
|
{
|
|
command = LCD_CMD_DISPON;
|
|
}
|
|
else
|
|
{
|
|
command = LCD_CMD_DISPOFF;
|
|
}
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, command, NULL, 0), TAG, "send command failed");
|
|
return ESP_OK;
|
|
}
|