实现input设备的注册,点击触摸屏能够产生中断回调
This commit is contained in:
parent
d25c56a0e6
commit
74b90cef1a
@ -18,7 +18,7 @@
|
||||
#include <linux/input.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include <linux/platform_device.h> /*平台设备*/
|
||||
|
||||
#include "cst816_update.h"
|
||||
|
||||
@ -27,10 +27,13 @@
|
||||
#define DEV_CNT (1)
|
||||
|
||||
|
||||
struct cst816x_data {
|
||||
struct gpio_desc *Interrupt_gpiod; //GPIO
|
||||
struct input_dev *button_input_dev; //按键输入子系统结构体
|
||||
struct platform_device *pdev; //平台设备结构体
|
||||
int irq; //中断irq
|
||||
};
|
||||
|
||||
// struct class *class_cst816d; //保存创建的类
|
||||
// struct device *device; // 保存创建的设备
|
||||
// struct device_node *cst816d_device_node; //cst816d的设备树节点
|
||||
int io_cst816d_reset; // 保存获取得到引脚编号
|
||||
|
||||
static dev_t mpu6050_devno; //定义字符设备的设备号
|
||||
@ -44,37 +47,6 @@ struct device_node *mpu6050_device_node; //rgb_led的设备树节点结构体
|
||||
struct i2c_client *mpu6050_client = NULL; //保存mpu6050设备对应的i2c_client结构体,匹配成功后由.prob函数带回。
|
||||
|
||||
|
||||
/*通过i2c 向mpu6050写入数据
|
||||
*mpu6050_client:mpu6050的i2c_client结构体。
|
||||
*address, 数据要写入的地址,
|
||||
*data, 要写入的数据
|
||||
*返回值,错误,-1。成功,0
|
||||
*/
|
||||
// static int i2c_write_cst816x(struct i2c_client *mpu6050_client, u8 address, u8 data)
|
||||
// {
|
||||
// int error = 0;
|
||||
// u8 write_data[2];
|
||||
// struct i2c_msg send_msg; //要发送的数据结构体
|
||||
|
||||
// /*设置要发送的数据*/
|
||||
// write_data[0] = address;
|
||||
// write_data[1] = data;
|
||||
|
||||
// /*发送 iic要写入的地址 reg*/
|
||||
// send_msg.addr = mpu6050_client->addr; //mpu6050在 iic 总线上的地址
|
||||
// send_msg.flags = 0; //标记为发送数据
|
||||
// send_msg.buf = write_data; //写入的首地址
|
||||
// send_msg.len = 2; //reg长度
|
||||
|
||||
// /*执行发送*/
|
||||
// error = i2c_transfer(mpu6050_client->adapter, &send_msg, 1);
|
||||
// if (error != 1)
|
||||
// {
|
||||
// printk(KERN_DEBUG "\n i2c_transfer error \n");
|
||||
// return -1;
|
||||
// }
|
||||
// return 0;
|
||||
// }
|
||||
|
||||
static int i2c_write_16bit_address(struct i2c_client *client, u16 address, u8 data)
|
||||
{
|
||||
@ -304,10 +276,48 @@ static struct file_operations mpu6050_chr_dev_fops =
|
||||
.release = NULL,
|
||||
};
|
||||
|
||||
/*按键中断处理函数*/
|
||||
static irqreturn_t button_input_irq_hander(int irq, void *dev_id)
|
||||
{
|
||||
// struct button_data *priv = dev_id;
|
||||
// int button_satus;
|
||||
|
||||
// /*读取按键引脚的电平,根据读取得到的结果输入按键状态*/
|
||||
// button_satus = (gpiod_get_value(priv->button_input_gpiod) & 1);
|
||||
// if(button_satus)
|
||||
// {
|
||||
// input_report_key(priv->button_input_dev, BTN_0, 1);
|
||||
// input_sync(priv->button_input_dev);
|
||||
// }
|
||||
// else
|
||||
// {
|
||||
// input_report_key(priv->button_input_dev, BTN_0, 0);
|
||||
// input_sync(priv->button_input_dev);
|
||||
// }
|
||||
printk(KERN_EMERG "\t button_input_irq_hander \n");
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int btn_open(struct input_dev *i_dev)
|
||||
{
|
||||
pr_info("input device opened()\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void btn_close(struct input_dev *i_dev)
|
||||
{
|
||||
pr_info("input device closed()\n");
|
||||
}
|
||||
|
||||
|
||||
|
||||
/*----------------平台驱动函数集-----------------*/
|
||||
static int cst816d_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
||||
{
|
||||
struct device_node *node=client->dev.of_node;
|
||||
struct input_dev *i_dev;
|
||||
struct cst816x_data *priv;
|
||||
struct gpio_desc *irq_gpio;
|
||||
int ret = -1; //保存错误状态码
|
||||
char chip_id = 0;
|
||||
int i=0;
|
||||
@ -319,10 +329,31 @@ static int cst816d_probe(struct i2c_client *client, const struct i2c_device_id *
|
||||
|
||||
printk(KERN_EMERG "\t match successed \n");
|
||||
|
||||
/* 分配输入设备 */
|
||||
i_dev = input_allocate_device();
|
||||
if (!i_dev) {
|
||||
pr_err("CST816D: Failed to allocate input device\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
/* 分配私有数据 */
|
||||
priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv) {
|
||||
ret = -ENOMEM;
|
||||
goto err_free_input;
|
||||
}
|
||||
|
||||
|
||||
i2c_set_clientdata(client, priv); // 绑定私有数据
|
||||
|
||||
io_cst816d_reset = of_get_named_gpio(node, "reset-gpios", 0);
|
||||
|
||||
printk(KERN_EMERG "cst816d = %d \n",io_cst816d_reset);
|
||||
|
||||
irq_gpio = devm_gpiod_get(&client->dev, "intirq", GPIOD_IN);
|
||||
if (IS_ERR(irq_gpio))
|
||||
return -ENODEV;
|
||||
|
||||
ret = alloc_chrdev_region(&mpu6050_devno, 0, DEV_CNT, DEV_NAME);
|
||||
if (ret < 0)
|
||||
{
|
||||
@ -330,6 +361,34 @@ static int cst816d_probe(struct i2c_client *client, const struct i2c_device_id *
|
||||
goto alloc_err;
|
||||
}
|
||||
|
||||
i_dev->open = btn_open;
|
||||
i_dev->close = btn_close;
|
||||
i_dev->name = "key input";
|
||||
i_dev->dev.parent = &client->dev;
|
||||
priv->button_input_dev = i_dev;
|
||||
|
||||
|
||||
priv->irq = gpiod_to_irq(irq_gpio);
|
||||
priv->Interrupt_gpiod = irq_gpio;
|
||||
|
||||
set_bit(EV_KEY, i_dev->evbit); /*设置要使用的输入事件类型*/
|
||||
set_bit(BTN_0, i_dev->keybit); /* 按钮 0*/
|
||||
|
||||
ret = input_register_device(priv->button_input_dev);
|
||||
if (ret) {
|
||||
pr_err("Failed to register inputdevice\n");
|
||||
goto err_input;
|
||||
}
|
||||
|
||||
|
||||
ret = request_any_context_irq(priv->irq, button_input_irq_hander,IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "input-button", priv);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev,"请求gpio中断失败\n");
|
||||
goto err_btn;
|
||||
}
|
||||
|
||||
|
||||
|
||||
//关联字符设备结构体cdev与文件操作结构体file_operations
|
||||
mpu6050_chr_dev.owner = THIS_MODULE;
|
||||
cdev_init(&mpu6050_chr_dev, &mpu6050_chr_dev_fops);
|
||||
@ -411,6 +470,14 @@ static int cst816d_probe(struct i2c_client *client, const struct i2c_device_id *
|
||||
printk(KERN_EMERG "\n cst816d ok! \n");
|
||||
return 0;
|
||||
|
||||
err_btn:
|
||||
gpiod_put(priv->Interrupt_gpiod);
|
||||
err_input:
|
||||
input_free_device(priv->button_input_dev);
|
||||
|
||||
err_free_input:
|
||||
input_free_device(i_dev);
|
||||
return ret;
|
||||
add_err:
|
||||
// 添加设备失败时,需要注销设备号
|
||||
unregister_chrdev_region(mpu6050_devno, DEV_CNT);
|
||||
@ -420,68 +487,35 @@ alloc_err:
|
||||
return -1;
|
||||
}
|
||||
|
||||
/*----------------平台驱动函数集-----------------*/
|
||||
// static int mpu6050_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
||||
// {
|
||||
|
||||
// int ret = -1; //保存错误状态码
|
||||
|
||||
// printk(KERN_EMERG "\t match successed \n");
|
||||
// /*---------------------注册 字符设备部分-----------------*/
|
||||
|
||||
// //采用动态分配的方式,获取设备编号,次设备号为0,
|
||||
// //设备名称为rgb-leds,可通过命令cat /proc/devices查看
|
||||
// //DEV_CNT为1,当前只申请一个设备编号
|
||||
// ret = alloc_chrdev_region(&mpu6050_devno, 0, DEV_CNT, DEV_NAME);
|
||||
// if (ret < 0)
|
||||
// {
|
||||
// printk("fail to alloc mpu6050_devno\n");
|
||||
// goto alloc_err;
|
||||
// }
|
||||
|
||||
// //关联字符设备结构体cdev与文件操作结构体file_operations
|
||||
// mpu6050_chr_dev.owner = THIS_MODULE;
|
||||
// cdev_init(&mpu6050_chr_dev, &mpu6050_chr_dev_fops);
|
||||
|
||||
// // 添加设备至cdev_map散列表中
|
||||
// ret = cdev_add(&mpu6050_chr_dev, mpu6050_devno, DEV_CNT);
|
||||
// if (ret < 0)
|
||||
// {
|
||||
// printk("fail to add cdev\n");
|
||||
// goto add_err;
|
||||
// }
|
||||
|
||||
// /*创建类 */
|
||||
// class_mpu6050 = class_create(THIS_MODULE, DEV_NAME);
|
||||
|
||||
// /*创建设备 DEV_NAME 指定设备名,*/
|
||||
// device_mpu6050 = device_create(class_mpu6050, NULL, mpu6050_devno, NULL, DEV_NAME);
|
||||
// mpu6050_client = client;
|
||||
// return 0;
|
||||
|
||||
// add_err:
|
||||
// // 添加设备失败时,需要注销设备号
|
||||
// unregister_chrdev_region(mpu6050_devno, DEV_CNT);
|
||||
// printk("\n error! \n");
|
||||
// alloc_err:
|
||||
|
||||
// return -1;
|
||||
// }
|
||||
|
||||
|
||||
static int cst816d_remove(struct i2c_client *client)
|
||||
{
|
||||
/*删除设备*/
|
||||
device_destroy(class_mpu6050, mpu6050_devno); //清除设备
|
||||
class_destroy(class_mpu6050); //清除类
|
||||
cdev_del(&mpu6050_chr_dev); //清除设备号
|
||||
unregister_chrdev_region(mpu6050_devno, DEV_CNT); //取消注册字符设备
|
||||
struct cst816x_data *priv = i2c_get_clientdata(client); // 获取驱动私有数据
|
||||
|
||||
if (!priv)
|
||||
return -EINVAL;
|
||||
|
||||
/* 1. 注销输入子系统 */
|
||||
input_unregister_device(priv->button_input_dev);
|
||||
|
||||
/* 2. 释放中断 */
|
||||
free_irq(priv->irq, priv);
|
||||
|
||||
/* 3. 释放 GPIO */
|
||||
gpiod_put(priv->Interrupt_gpiod);
|
||||
|
||||
/* 4. 清除字符设备相关资源 */
|
||||
device_destroy(class_mpu6050, mpu6050_devno);
|
||||
class_destroy(class_mpu6050);
|
||||
cdev_del(&mpu6050_chr_dev);
|
||||
unregister_chrdev_region(mpu6050_devno, DEV_CNT);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
static const struct of_device_id cst816x_of_match[] = {
|
||||
{ .compatible = "Yura,cst816t"},
|
||||
{ /* sentinel */ }
|
||||
|
||||
Binary file not shown.
Loading…
Reference in New Issue
Block a user