调整打印速度为50mm/s
This commit is contained in:
parent
8a03a3b16c
commit
73122e5ff1
@ -14,6 +14,6 @@ set(module_srcs
|
||||
|
||||
|
||||
idf_component_register(SRCS ${srcs} ${module_srcs}
|
||||
PRIV_REQUIRES spi_flash driver esp_event
|
||||
PRIV_REQUIRES spi_flash driver esp_event esp_timer
|
||||
INCLUDE_DIRS "."
|
||||
INCLUDE_DIRS "module")
|
||||
|
||||
22
main/main.c
22
main/main.c
@ -20,6 +20,7 @@ static const char *TAG = "main";
|
||||
|
||||
#define BLINK_GPIO 4
|
||||
|
||||
extern void light_sleep_task(void *args);
|
||||
extern void Usb_Virtual_serial_port_init(void);
|
||||
QueueHandle_t User_data_queue;
|
||||
user_data_t Receive_All_data;
|
||||
@ -63,18 +64,19 @@ void app_main(void)
|
||||
button_init();
|
||||
Printer_Bsp_Init();
|
||||
Printer_run_init();
|
||||
|
||||
// xTaskCreate(light_sleep_task, "light_sleep_task", 4096, NULL, 6, NULL);
|
||||
while (1) {
|
||||
if(xQueueReceive(User_data_queue, &Receive_All_data, portMAX_DELAY))
|
||||
{
|
||||
uint16_t Spaces = uxQueueSpacesAvailable(User_data_queue);
|
||||
ESP_LOGI(TAG,"Spaces:%d Type:%d Size:%d",Spaces,Receive_All_data.type,Receive_All_data.size);
|
||||
if(Receive_All_data.type == USB)
|
||||
{
|
||||
input_Print_data(CMD_CUSTON,&Receive_All_data.data[0],Receive_All_data.size);
|
||||
}
|
||||
}
|
||||
// if(xQueueReceive(User_data_queue, &Receive_All_data, portMAX_DELAY))
|
||||
// {
|
||||
// uint16_t Spaces = uxQueueSpacesAvailable(User_data_queue);
|
||||
// ESP_LOGI(TAG,"Spaces:%d Type:%d Size:%d",Spaces,Receive_All_data.type,Receive_All_data.size);
|
||||
// if(Receive_All_data.type == USB)
|
||||
// {
|
||||
// input_Print_data(CMD_CUSTON,&Receive_All_data.data[0],Receive_All_data.size);
|
||||
// }
|
||||
// }
|
||||
// ESP_LOGI(TAG, "LED State:%d",!s_led_state);
|
||||
vTaskDelay(1000/ portTICK_PERIOD_MS);
|
||||
}
|
||||
fflush(stdout);
|
||||
esp_restart();
|
||||
|
||||
@ -99,7 +99,6 @@ void Sys_heap_Init(void)
|
||||
void Fill_block2Page_Buff(uint16_t SetPosY,uint16_t hight,uint8_t* block_buff)
|
||||
{
|
||||
uint32_t Total_height = SetPosY + hight;
|
||||
memset(&Heat58MM.Heat_Page_buff[0],0xff,TH_ACTUAL_WIDTH*3);
|
||||
for(int i=SetPosY;i<(SetPosY+hight);i++)
|
||||
{
|
||||
memcpy(&Heat58MM.Heat_Page_buff[i*TH_ACTUAL_WIDTH],&block_buff[(i - SetPosY)*TH_ACTUAL_WIDTH],TH_ACTUAL_WIDTH);
|
||||
@ -210,7 +209,9 @@ void Sys_Key_motion_cb(void *arg, void *data)
|
||||
switch ((button_event_t)data)
|
||||
{
|
||||
case BUTTON_SINGLE_CLICK:
|
||||
/* code */
|
||||
memset(&Heat58MM.Heat_Page_buff[0],0x00,TH_ACTUAL_WIDTH*500*8);
|
||||
Heat58MM.Heat_Write = 200*8;
|
||||
xEventGroupSetBits(Printer_group,EVENT_Motor_Test);
|
||||
break;
|
||||
|
||||
default:
|
||||
@ -348,8 +349,11 @@ void Printer_Heat_task(void *pvParameter)
|
||||
break;
|
||||
case EVENT_Heat_Begin:
|
||||
//开始加热
|
||||
Set_gpio_state(&STB,1);
|
||||
Set_heat_timer_value(400*1);
|
||||
if(Heat_Step < 3)
|
||||
{
|
||||
Set_gpio_state(&STB,1);
|
||||
}
|
||||
Set_heat_timer_value(312);//50mm/s
|
||||
|
||||
xEventGroupClearBits(Printer_group,EVENT_Heat_Begin);
|
||||
break;
|
||||
@ -374,10 +378,6 @@ void Printer_Heat_task(void *pvParameter)
|
||||
{
|
||||
Heat_Step = 0;
|
||||
}
|
||||
// STB.state = 0;
|
||||
// gpio_set_level(STB.pin_num,STB.state);
|
||||
// ESP_LOGI(TAG,"Heat_END_EVENT");
|
||||
// Motor_GO(0xff);
|
||||
xEventGroupSetBits(Printer_group,EVENT_Motor_Test);
|
||||
xEventGroupClearBits(Printer_group,EVENT_Heat_Done);
|
||||
break;
|
||||
@ -413,6 +413,6 @@ void Printer_run_init()
|
||||
Heat58MM.Heat_block_buff = malloc(TH_ACTUAL_WIDTH*100*8);
|
||||
memset(&Heat58MM.Heat_Page_buff[0],0x00,TH_ACTUAL_WIDTH*500*8);
|
||||
memset(&Heat58MM.Heat_block_buff[0],0x00,TH_ACTUAL_WIDTH*100*8);
|
||||
xTaskCreatePinnedToCore(Printer_Heat_task, "Printer_Heat_task", 1024 * 10, NULL, 20, NULL, 1);//核心1
|
||||
xTaskCreatePinnedToCore(Printer_Heat_task, "Printer_Heat_task", 1024 * 10, NULL, 28, NULL, 1);//核心1
|
||||
xTaskCreatePinnedToCore(Printer_Run_task, "Printer_Run_task", 1024 * 100, NULL, 12, NULL, 0);//核心1
|
||||
}
|
||||
118
main/module/esp_sleep.c
Normal file
118
main/module/esp_sleep.c
Normal file
@ -0,0 +1,118 @@
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <stdlib.h>
|
||||
#include <time.h>
|
||||
#include <sys/time.h>
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/task.h"
|
||||
#include "driver/uart.h"
|
||||
#include "esp_sleep.h"
|
||||
#include "esp_log.h"
|
||||
#include "esp_timer.h"
|
||||
#include "esp_check.h"
|
||||
#include "driver/gpio.h"
|
||||
|
||||
|
||||
|
||||
#define TAG "esp_sleep"
|
||||
|
||||
#define BOOT_BUTTON_NUM 0
|
||||
/* Use boot button as gpio input */
|
||||
#define GPIO_WAKEUP_NUM BOOT_BUTTON_NUM
|
||||
/* "Boot" button is active low */
|
||||
#define GPIO_WAKEUP_LEVEL 0
|
||||
|
||||
|
||||
void example_wait_gpio_inactive(void)
|
||||
{
|
||||
printf("Waiting for GPIO%d to go high...\n", GPIO_WAKEUP_NUM);
|
||||
while (gpio_get_level(GPIO_WAKEUP_NUM) == GPIO_WAKEUP_LEVEL) {
|
||||
vTaskDelay(pdMS_TO_TICKS(10));
|
||||
}
|
||||
}
|
||||
|
||||
esp_err_t example_register_gpio_wakeup(void)
|
||||
{
|
||||
/* Initialize GPIO */
|
||||
gpio_config_t config = {
|
||||
.pin_bit_mask = BIT64(GPIO_WAKEUP_NUM),
|
||||
.mode = GPIO_MODE_INPUT,
|
||||
.pull_down_en = false,
|
||||
.pull_up_en = false,
|
||||
.intr_type = GPIO_INTR_DISABLE
|
||||
};
|
||||
ESP_RETURN_ON_ERROR(gpio_config(&config), TAG, "Initialize GPIO%d failed", GPIO_WAKEUP_NUM);
|
||||
|
||||
/* Enable wake up from GPIO */
|
||||
ESP_RETURN_ON_ERROR(gpio_wakeup_enable(GPIO_WAKEUP_NUM, GPIO_WAKEUP_LEVEL == 0 ? GPIO_INTR_LOW_LEVEL : GPIO_INTR_HIGH_LEVEL),
|
||||
TAG, "Enable gpio wakeup failed");
|
||||
ESP_RETURN_ON_ERROR(esp_sleep_enable_gpio_wakeup(), TAG, "Configure gpio as wakeup source failed");
|
||||
|
||||
/* Make sure the GPIO is inactive and it won't trigger wakeup immediately */
|
||||
example_wait_gpio_inactive();
|
||||
ESP_LOGI(TAG, "gpio wakeup source is ready");
|
||||
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
|
||||
void light_sleep_task(void *args)
|
||||
{
|
||||
/* Enable wakeup from light sleep by gpio */
|
||||
example_register_gpio_wakeup();
|
||||
vTaskDelay(1000/ portTICK_PERIOD_MS);
|
||||
while (true) {
|
||||
printf("Entering light sleep\n");
|
||||
/* To make sure the complete line is printed before entering sleep mode,
|
||||
* need to wait until UART TX FIFO is empty:
|
||||
*/
|
||||
uart_wait_tx_idle_polling(CONFIG_ESP_CONSOLE_UART_NUM);
|
||||
|
||||
/* Get timestamp before entering sleep */
|
||||
int64_t t_before_us = esp_timer_get_time();
|
||||
|
||||
/* Enter sleep mode */
|
||||
esp_light_sleep_start();
|
||||
|
||||
/* Get timestamp after waking up from sleep */
|
||||
int64_t t_after_us = esp_timer_get_time();
|
||||
|
||||
/* Determine wake up reason */
|
||||
const char* wakeup_reason;
|
||||
switch (esp_sleep_get_wakeup_cause()) {
|
||||
case ESP_SLEEP_WAKEUP_TIMER:
|
||||
wakeup_reason = "timer";
|
||||
break;
|
||||
case ESP_SLEEP_WAKEUP_GPIO:
|
||||
wakeup_reason = "pin";
|
||||
break;
|
||||
case ESP_SLEEP_WAKEUP_UART:
|
||||
wakeup_reason = "uart";
|
||||
/* Hang-up for a while to switch and execute the uart task
|
||||
* Otherwise the chip may fall sleep again before running uart task */
|
||||
vTaskDelay(1);
|
||||
break;
|
||||
#if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
|
||||
case ESP_SLEEP_WAKEUP_TOUCHPAD:
|
||||
wakeup_reason = "touch";
|
||||
break;
|
||||
#endif
|
||||
default:
|
||||
wakeup_reason = "other";
|
||||
break;
|
||||
}
|
||||
#if CONFIG_NEWLIB_NANO_FORMAT
|
||||
/* printf in newlib-nano does not support %ll format, causing example test fail */
|
||||
printf("Returned from light sleep, reason: %s, t=%d ms, slept for %d ms\n",
|
||||
wakeup_reason, (int) (t_after_us / 1000), (int) ((t_after_us - t_before_us) / 1000));
|
||||
#else
|
||||
printf("Returned from light sleep, reason: %s, t=%lld ms, slept for %lld ms\n",
|
||||
wakeup_reason, t_after_us / 1000, (t_after_us - t_before_us) / 1000);
|
||||
#endif
|
||||
if (esp_sleep_get_wakeup_cause() == ESP_SLEEP_WAKEUP_GPIO) {
|
||||
/* Waiting for the gpio inactive, or the chip will continuously trigger wakeup*/
|
||||
example_wait_gpio_inactive();
|
||||
}
|
||||
}
|
||||
vTaskDelete(NULL);
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user